Product Introduction
Our Electric Flat Gate Valve uses a vertically moving flat parallel gate driven by an electric actuator for intelligent remote operation, eliminating manual labor and reducing operational errors. Available with a diversion hole for pipeline pigging or without for enhanced sealing integrity, it features elastic preloaded double-seat sealing with hardfaced alloy surfaces for friction-free, wear-resistant zero-leakage performance. Manufactured to global pipeline standards, it ensures universal compatibility across water, oil, gas, steam, sewage and slurry applications, delivering reliable automated isolation for diverse industrial systems.
Product Features
1. Intelligent Electric Control & Remote Automation: Equipped with an advanced multi-turn electric actuator (Rotork, AUMA, or equivalent), it supports remote monitoring, precise position control, and seamless SCADA/DCS integration. Operators can monitor valve status and command opening or closing from central control terminals in real time, realizing fully automated production, reducing labor intensity, and minimizing human error in critical process environments.
2. Elastic Preloaded Double-Seat Sealing: Adopts an elastic preloaded double-seat sealing structure where the valve seat and gate form face-to-face contact. Gate and seat surfaces receive special treatment including Stellite hard alloy overlay welding, ensuring friction-free sealing surface operation, strong wear resistance, and reliable zero-leakage performance even under high pressure or with harsh media. A triple adjustable packing structure further enhances stem sealing reliability.
3. Ultra-Low Flow Resistance & Energy Saving: The flat gate design ensures unobstructed straight-through fluid flow, with flow resistance as low as an equivalent short straight pipe section, effectively reducing pressure drop and pumping energy consumption during operation. This energy-saving characteristic aligns with global sustainability requirements and delivers measurable operational cost savings over the valve lifecycle, especially in large-diameter high-flow pipelines.
4. Compact Structure & In-Line Maintenance: Compared with conventional gate valves and ball valves, it offers smaller size, lighter weight, and reduced installation footprint, lowering pipeline support loads. It can be installed at any orientation, and wear components including seats, packing, and gate seals can be replaced without removing the valve body from the pipeline, saving maintenance time and labor cost.
5. Wide Media & Temperature Adaptability: Available in carbon steel (WCB), stainless steel (304/316L), and alloy steel constructions across multiple pressure grades, it handles water, oil, natural gas, steam, sewage, and slurries containing suspended particles. Operating temperatures range from -29°C to 425°C depending on material selection, meeting the demands of various harsh industrial environments.
6. Safety, Pressure Relief & Seismic Durability: Equipped with an integrated pressure relief device to prevent valve body damage from excessive internal cavity pressure, ensuring safe operation. The fully assembled yoke passes seismic testing, and the valve stem features stable trapezoidal threads with an anti-loosening structure. A manual handwheel override provides emergency operation during power failure, and the actuator includes over-torque protection to prevent damage from obstructions or excessive seating force.
Working Principle
The Electric Flat Gate Valve operates on the parallel slide gate principle with electric actuation. The actuator drives the stem via gearing, lifting or lowering the flat gate between elastic preloaded seats: fully open, the gate retracts above the bore for unobstructed straight-through flow; closing, elastic springs push seats against both gate faces, forming bidirectional zero-leakage seals. Limit switches and torque sensors feed position to the control system. Manual override handles power failures, and a pressure relief device vents cavity over-pressure to prevent damage.
Application Scenarios
Oil & Gas Industry: Oil and gas extraction wellheads, long-distance transmission pipelines, storage facilities, and Christmas tree equipment, with material options suitable for media containing H₂S and CO₂ (sour service) requiring automated remote isolation.
Chemical Industry: Chemical production process lines, wastewater treatment systems, and pipelines conveying corrosive media and slurries, where electric automation enables remote control in hazardous or inaccessible process areas.
Power Industry: Thermal power plants, hydropower stations, ash removal systems, and pipelines for water, steam, and cooling water, providing reliable automated isolation with low flow resistance for high-efficiency plant operation.
Mining & Metallurgy: Coal washing pipelines, mineral slurry lines, ash discharge systems, and ore pulp conveying, where the flat gate design and hardfaced seats resist erosion from abrasive particulate media.
Municipal, Paper & Food: Urban water supply and drainage, gas transmission mains, environmental protection equipment, pulp and material conveying in paper mills, and fluid control in food processing facilities requiring hygienic and automated operation.
Quality Assurance
Every Electric Flat Gate Valve is manufactured and tested per API 6D, API 6A, ASME B16.34, GB/T 12234, and ISO 9001:2015. Raw materials are MTR-verified by heat number with chemical/mechanical testing. Each valve undergoes dimensional inspection, shell test at 1.5× and seat test at 1.1× per API 598/GB/T 13927. Actuators are tested for stroke, torque, limit calibration, insulation, with manual override and seismic verified. NDT includes MT/PT on castings and welds as required. Units ship with serialized MTR, test reports, and 18-month warranty, with BV/SGS/TUV inspection on request.
FAQ
Q1: What electric actuator brands are available, and what control options do they support?
A: Premium multi-turn actuators from Rotork, AUMA and equivalent domestic brands, with standard IP67/IP68 protection. Control options include basic on-off, 4–20mA modulating control, and network protocols including Modbus RTU, Profibus, HART and Foundation Fieldbus for DCS/SCADA integration. Explosion-proof actuators (ATEX/IECEx) are available for hazardous areas.
Q2: What happens if the power supply fails during operation?
A: The actuator holds its last position on power loss. For safety-critical applications, battery backup packs can drive the valve to a pre-set fail-open/fail-close position. Every actuator also includes a declutchable manual handwheel override for manual operation during extended outages, with automatic re-engagement when power is restored.
Q3: What is the difference between with-diversion-hole and without-diversion-hole configurations?
A: With-diversion-hole (vented) models have a precision hole in the gate that aligns with the pipeline bore when fully open, enabling unobstructed pig passage - essential for long-distance oil/gas transmission pipelines. Without-diversion-hole (non-vented) models use a solid gate plate for more robust sealing and higher pressure rating, preferred for process piping and power plants where pigging is not required.
Q4: Can an electric flat gate valve be used for throttling or flow regulation?
A: Standard on-off models are for fully open/fully closed service only and should not be used for throttling. Modulating actuators with 4–20mA control are available for intermediate positioning, but partial-open operation will accelerate seat erosion due to high-velocity media. For precise flow regulation, use a control valve, globe valve or V-port ball valve designed for modulating service.
Q5: What maintenance does the electric actuator and valve require?
A: The actuator requires periodic inspection of motor, gearbox lubrication, terminal connections and heater function - typically annually, with gearbox oil change every 3–5 years. The valve body requires stem packing lubrication and external flange inspection. Wear components are replaceable in-line without valve removal. Under normal conditions, the valve achieves 100,000+ operating cycles before major overhaul.
Hot Tags: Electric Flat Gate Valve | API 6D Automated Bidirectional Gate Valve, China Electric Flat Gate Valve | API 6D Automated Bidirectional Gate Valve manufacturers, suppliers, factory, gate valve 40mm, 1 1 4 inch gate valve, air slide valve, rubber flap gate, gate valve and check valve, resilient valve
| Item | Specification |
|---|---|
| Product Name | Electric Flat Gate Valve |
| Valve Type | Electrically actuated parallel slide flat gate valve; on-off service |
| Nominal Diameter | DN50 – DN1500 (NPS 2" – 60") |
| Nominal Pressure | PN1.0 – PN16.0 MPa (Class 150 – Class 900) |
| Operating Temperature | -29℃ ~ 425℃ (material dependent) |
| Body Material | Carbon Steel (WCB), Stainless Steel (304/316L), Alloy Steel |
| Gate & Seat Material | Stainless Steel + Stellite hardfacing; PTFE/NBR/FKM soft seal |
| Connection Type | Flanged (ASME B16.5 / GB/T 9113); Wafer type |
| Actuator Type | Multi-turn electric (Rotork/AUMA or equivalent); with manual handwheel override |
| Power Supply | 380V/415V/440V 3-phase 50/60Hz; 220V single-phase (customizable) |
| Control Mode | On-off; 4–20mA modulating; Modbus/Profibus/HART; explosion-proof (optional) |
| Structure Type | Single gate / double gate; with diversion hole / without diversion hole |
| Safety Features | Pressure relief device; over-torque protection; seismic tested yoke; manual override |
| Design Standard | API 6D, API 6A, ASME B16.34, GB/T 12234 |
| Test Standard | API 598, GB/T 13927 |
| Warranty | 18 months from shipment |







