Product Introduction
Our Chromium-molybdenum Steel Gate Valve (Chrome-Moly) is a specialized on-off valve with a wedge gate moving vertically for on-off control. Its core advantage is chromium-molybdenum steel construction (ASTM A217 WC5/WC6/WC9, A182 F11/F22) combining 593°C heat strength, corrosion, and hydrogen attack resistance - solving carbon steel deformation and seal failure in harsh service. Stellite seats HRC60+ for wear resistance; flexible wedge accommodates thermal expansion. Nitrided 410 stem, graphite packing. DN15–DN600, PN16–PN160 (Class 150–2500), -29~593°C, flanged/BW/threaded, manual/gear/electric/pneumatic. For full open/close isolation only - not throttling. Per API 600, ASTM A217, DIN 3352, tested per API 598.
Product Features
1. Superior Chrome-Moly Material Performance: The valve body, bonnet, and gate plate are made of high-quality chromium-molybdenum steel (common grades: ASTM A217 WC5, WC6, WC9 for castings; A182 F11, F22 for forgings), providing outstanding high-temperature resistance up to 593°C, minimum tensile strength of 485 MPa, and excellent creep resistance at elevated temperatures. The chromium element enhances corrosion and oxidation resistance, effectively preventing cracking caused by hydrogen attack (hydrogen-induced cracking, HIC), temper embrittlement, and hot sulfide corrosion (sulfide stress cracking, SSC) - solving the common problems of deformation and seal failure that traditional carbon steel (WCB) valves face in high-temperature, high-pressure, and sour service conditions.
2. Zero-Leakage Stellite Sealing: The valve seat and gate sealing surfaces are overlay-welded with Stellite (cobalt-chromium alloy, typically Stellite 6 or Stellite 21) or iron-based hard alloy, achieving hardness over HRC60 and ensuring excellent wear resistance, scratch resistance, erosion resistance, and bidirectional sealing performance. The flexible wedge design - a split disc or single disc with a flexible hinge - accommodates differential thermal expansion between the body and gate under high-temperature cycling, further improving sealing reliability even under extreme temperature changes and preventing thermal binding that can cause seat damage or operation failure.
3. Multiple Operation Modes & Low Torque: Available in multiple operation modes - manual (handwheel), gear-driven (bevel gear for large calibers), electric (with local/remote control and explosion-proof options), or pneumatic (with spring-return fail-safe) - to meet different installation scenarios and automation control needs. Medium and large-caliber valves (typically DN≥200) are equipped with rolling bearings (thrust bearings) at the stem-yoke interface to reduce operating torque, making opening and closing smooth and labor-saving even under high-pressure differential conditions. Gear operators are permanently lubricated and sealed for maintenance-free long-term operation.
4. Extended Bonnet & Thermal Protection: An extended bonnet (also called long-neck bonnet or high-temperature bonnet) configuration is available for high-temperature service, which increases the distance between the hot body cavity and the packing gland, minimizing conductive and convective heat transfer to the packing area. This protects the flexible graphite packing and valve stem from excessive heat, preventing packing degradation, stem oxidation, and loss of sealing performance at temperatures up to 593°C. The extended bonnet also provides a larger heat-dissipation surface area and is standard for steam and high-temperature process applications.
5. Durable Construction & Low Maintenance: The valve stem is quenched and tempered with surface nitriding treatment, ensuring good wear resistance, corrosion resistance, and anti-galling performance - preventing stem seizure during repeated cycling. High-quality asbestos graphite or flexible graphite packing (with optional Inconel wire reinforcement) is used to prevent medium leakage and reduce maintenance frequency. The overall service life is 3–5 times longer than ordinary carbon steel gate valves in equivalent harsh conditions, effectively reducing operation and maintenance costs and minimizing unplanned downtime.
6. International Standards & Customization: Strictly manufactured in accordance with API 600 (steel gate valves), ASTM A217/A182 (material specifications), DIN 3352, GB 9112, and ISO 2084 standards, with full-process quality control and comprehensive testing to ensure each valve meets international industrial requirements. We accept customization of non-standard products, American standards (API/ASME), European standards (DIN/EN), and Japanese standards (JIS) according to customer requirements, including special materials, special pressure classes, special end connections, and NACE MR0175/ISO 15156 sour service compliance.
Working Principle
The Chromium-molybdenum Steel Gate Valve operates on the wedge gate principle. Handwheel turns stem; Acme threads lift Stellite wedge disc: open, retracts for unobstructed flow; closing, seats for zero leakage. Flexible wedge accommodates thermal expansion under -29~593°C cycling, preventing binding. Nitrided 410 stem resists corrosion; graphite packing seals stem. Rolling bearings reduce torque on large valves; extended bonnet protects packing from heat. Chrome-moly body (A217/A182) maintains creep strength, resists hydrogen/sulfide attack. For open/close isolation only - not throttling (partial opening erodes seats).
Application Scenarios
Oil & Gas Industry: Used in oil and gas transmission pipelines, catalytic crackers, hydroprocessing reactors, and wellhead equipment, especially suitable for sour service (H2S-containing media) with sulfur-resistant (NACE MR0175/ISO 15156) requirements. The chrome-moly construction resists sulfide stress cracking (SSC) and hydrogen-induced cracking (HIC), while Stellite seats provide reliable sealing for crude oil, natural gas, and hydrocarbon products in upstream, midstream, and downstream operations.
Power Generation Industry: Applied in main steam lines, reheat steam lines, boiler feedwater systems, and cooling water systems of thermal power plants and combined-cycle power plants, adapting to high-temperature steam (540–570°C) and high-pressure (≥25 MPa) conditions. The extended bonnet and creep-resistant chrome-moly body ensure long-term reliable operation in continuous high-temperature steam service where carbon steel valves would suffer deformation and premature failure.
Petrochemical & Chemical Industry: Suitable for chemical media transportation and control in petrochemical plants, fertilizer plants, and pharmaceutical factories, including high-temperature process lines, reactor isolation, and distillation column isolation. The hydrogen attack resistance and high-temperature strength make it ideal for hydrocracking, hydrotreating, and reforming units, while Stellite seats resist erosion from catalyst-laden media and prevent medium leakage to ensure equipment and personnel safety.
Metallurgical Industry: Used in flue gas handling systems with transient high temperatures (exceeding 800°C in peak conditions), blast furnace gas lines, coke oven gas systems, and other metallurgical pipelines that require reliable on-off control under thermal cycling and particulate-laden gas conditions. The chrome-moly body resists high-temperature oxidation, and the Stellite hardfaced seats resist erosion from dust and particulates in the gas stream.
Refining & Hydrogen Processing: Specifically designed for refinery hydrocrackers, hydrotreaters, desulfurization units, and hydrogen production/reforming plants where high-pressure hydrogen service (up to PN160 / Class 2500) and high temperatures (up to 593°C) are combined. The chromium-molybdenum steel (especially WC9 and F22 grades) provides proven resistance to high-temperature hydrogen attack (HTHA), making it the industry-standard material choice for these critical refining applications where safety and reliability are paramount.
Quality Assurance
Every Chromium-molybdenum Steel Gate Valve is manufactured and tested per API 600, ASTM A217, DIN 3352, ISO 9001. Raw materials MTR-verified with chemical/mechanical/creep tests for chrome-moly grades. Castings 100% inspected with RT/UT per ASTM. Stem (410) quenched/tempered, nitrided, hardness verified. Stellite overlay 100% inspected, HRC60+ verified, PT tested. Valves get dimensional check, shell 1.5×, seat 1.1× per API 598, plus gas seal test. Flexible wedge verified for movement and clearance. Packing glands torque-verified. Actuators tested. Units ship with MTR, NDE reports, test cert, 18-month warranty, BV/SGS on request.
FAQ
Q1: What is chromium-molybdenum steel, and why use it instead of carbon steel for gate valves?
A: Chrome-moly steel is an alloy with 1–9% chromium and 0.5–1% molybdenum, offering dramatically superior elevated-temperature performance: higher high-temperature strength and creep resistance up to 593°C, plus resistance to hydrogen attack (HTHA), sulfide stress cracking (SSC) and oxidation. It solves deformation, cracking and premature failure issues of carbon steel valves in high-temperature, sour and hydrogen service.
Q2: What temperature and pressure range can a chrome-moly gate valve handle?
A: Nominal sizes DN15–DN600, nominal pressure PN16–PN160 (Class 150–2500), operating temperature -29℃ to 593°C. Actual maximum allowable working pressure decreases as temperature increases per ASME B16.34 pressure-temperature ratings. Grade should be selected based on actual operating conditions.
Q3: What is the difference between WC5, WC6, WC9, F11 and F22 grades?
A: WC5/WC6/WC9 are cast grades with increasing Cr-Mo content (WC9 highest), suitable for larger valve bodies, with temperature limits from ~510°C to 593°C. F11/F22 are forged equivalents of WC6/WC9, used for smaller, higher-pressure valves and critical components.
Q4: Can chrome-moly gate valves be used for sour service and hydrogen service?
A: Yes. For sour service (H₂S), normalized and tempered chrome-moly with hardness ≤22 HRC resists sulfide stress cracking, certified to NACE MR0175/ISO 15156. For high-temperature hydrogen service, WC9/F22 grades resist high-temperature hydrogen attack (HTHA), making them industry standard for hydrocrackers and hydrotreaters up to 593°C.
Q5: What maintenance and inspection does a chrome-moly gate valve require?
A: Periodically exercise valves (every 6–12 months) to prevent stem seizure and seat fouling. Monitor packing gland for leakage and re-torque as needed. Lubricate gear operators and bearings annually. For critical service, perform in-service ultrasonic thickness measurement and hardness inspection. Major overhaul every 5–10 years including seal inspection, stem check and packing replacement.
Hot Tags: Chromium-Molybdenum Steel Gate Valve | High Temp 593°C API 600 Wedge Gate, China Chromium-Molybdenum Steel Gate Valve | High Temp 593°C API 600 Wedge Gate manufacturers, suppliers, factory, inlet gate valve, 24 gate valve, 3 inch brass gate valve, 2 gate valve, flange gate, gate valve pvc 1 2
| Item | Specification |
|---|---|
| Product Name | Chromium-Molybdenum Steel Gate Valve |
| Valve Type | Wedge gate valve (flexible wedge); bolted bonnet; on-off isolation service |
| Design Standard | API 600, ASTM A217/A182, DIN 3352, GB 9112, ISO 2084, ASME B16.34 |
| Body/Bonnet/Gate Material | Chromium-molybdenum steel: ASTM A217 WC5/WC6/WC9 (cast); A182 F11/F22 (forged) |
| Stem Material | AISI 410 stainless, quenched & tempered, surface nitrided; or Cr-Ni-Mo-Ti steel |
| Sealing Surface | Stellite (CoCr alloy, Stellite 6/21) or iron-based hard alloy; hardness ≥HRC60 |
| Packing Material | Asbestos graphite or flexible graphite; Inconel wire reinforcement (optional) |
| Nominal Diameter | DN15 – DN600 (NPS 1/2" – 20") |
| Nominal Pressure | PN16 – PN160 MPa (ANSI Class 150 – Class 2500) |
| Operating Temperature | -29℃ ~ 593℃ (grade dependent; per ASME B16.34 rating) |
| Applicable Medium | Water, steam, oil products, natural gas, corrosive media, sour gas (H₂S), hydrogen service |
| Connection Type | Flanged (RF/RTJ), Butt Weld (BW), Threaded (BSP/BSPT/NPT) |
| Operation Mode | Manual handwheel, Gear-driven bevel gear, Electric (explosion-proof optional), Pneumatic (spring-return optional) |
| Test Standard | API 598; Shell: 1.5×Pr; Seat: 1.1×Pr; optional high-pressure gas test |
| Optional Certifications | NACE MR0175/ISO 15156 sour service, NACE MR0103, ISO 9001, BV/SGS/TÜV third-party inspection |
| Warranty | 18 months from shipment |







