Product Introduction
Our pneumatic gate valve is a flow control valve driven by a pneumatic actuator for on-off isolation of liquids, gases, and slurries in industrial pipelines. Body, wedge gate, pneumatic actuator (single/double acting), seals, control for rapid 0.5–2s operation. Compressed air 0.4–0.8 MPa, inherent explosion-proof; manual override, buffer reduces impact. Wedge gate, PTFE/NBR/EPDM/FKM or hard-alloy seal, low resistance, OS&Y indicator. Body 304/316/WCB/ductile iron; soft -29~210°C, hard -40~550°C. DN15–DN600, PN10–PN40/Class 150–300, flanged. Per API 600, GB 12234, API 598 tested. IP65/IP67, Exd IIB/IIC option. Remote DCS/PLC for oil & gas, chemical, power, water treatment.
Product Features
1.Automated Remote Control: Supports remote operation and DCS/PLC integration for full pipeline automation. 0.5–2s rapid response suits frequent on-off scenarios; solenoid and limit switches provide real-time open/close status feedback, reducing manual intervention and improving efficiency.
2.High Safety & Reliability: Pneumatic actuation is inherently spark-free, safe for flammable and explosive environments. Manual override enables operation during air supply failure; built-in buffer reduces impact during operation, extending sealing surface service life.
3.Strong Environmental Adaptability: Multiple body materials (stainless steel, carbon steel, ductile iron) resist corrosion from acids, alkalis and salt spray. Soft seals for -29~210℃ service; hard seals withstand up to 550℃ for high-temperature and abrasive conditions.
4.Easy Maintenance & Long Service Life: Simple structure with few wearing parts and low failure rate. OS&Y rising stem with on-site indicator rod facilitates visual status inspection and routine maintenance.
5.Excellent Sealing Performance: High-quality PTFE/NBR/EPDM/FKM seals with precision machining achieve zero leakage. Wedge gate design enhances sealing effect, with line pressure further improving sealing force even under high pressure.
6.Wide Specification Range & Standards Compliance: Covers DN15–DN600, PN10–PN40, with flanged connections per global standards. IP65/IP67 protection; optional Ex d IIB/IIC explosion-proof solenoid (ATEX/IECEx). Supports OEM/ODM customization.
Working Principle
The Pneumatic Gate Valve operates on the wedge gate principle for on-off isolation, powered by a pneumatic cylinder. Compressed air 0.4–0.8 MPa via solenoid drives piston/OS&Y stem to lift/lower wedge: double-acting air both strokes; single-acting spring fails open/close. Open, low-resistance flow; closed, tight wedge seal. Buffer reduces impact, water hammer, seal wear. OS&Y visual indicator; manual override for air failure. Solenoid/limit switches feed status to DCS/PLC. Inherently explosion-proof, Exd IIB/IIC option, IP65/IP67. For open/closed isolation only - not throttling.
Application Scenarios
Oil & Gas Industry: Used in wellhead devices, oil and gas gathering and transportation pipelines, refineries, and storage tanks for medium isolation and emergency shut-off, withstanding high pressure and corrosion from hydrogen sulfide, carbon dioxide, and other media. Meets API 6A and other explosion-proof standards, ensuring safety in flammable and explosive environments. Pneumatic actuation's inherent spark-free operation is preferred for hazardous wellhead and tank farm service.
Chemical & Petrochemical Industry: Applied in reaction kettles, distillation towers, and acid-base medium transportation pipelines for on-off control of chemical raw materials and reaction systems. Strong corrosion resistance adapts to aggressive media such as sulfuric acid, hydrochloric acid, and caustic soda, with 304/316/316L stainless and PTFE/FKM seals. Meets ATEX or IECEx explosion-proof standards for hazardous chemical plant zones.
Power Generation Industry: Used in thermal power plants, nuclear power plants, and new energy power plants for controlling steam, water, and other media in main steam pipelines, circulating water systems, and cooling water systems. Withstands high temperature and high pressure, and meets ASME BPVC specifications in nuclear power applications, ensuring safe system operation. Rapid pneumatic response is valuable for emergency isolation sequences.
Water Treatment & Environmental Protection: Suitable for sewage treatment plants and seawater desalination devices for controlling water flow, sludge, and chemical agent transportation. Anti-clogging and anti-corrosion performance, with valve body surface treated with anti-corrosion coating to adapt to harsh sewage and seawater environments. Pneumatic actuation handles frequent cycling in automated treatment processes reliably.
Metallurgy, Mining & General Industries: Used in blast furnace gas pipelines, converter flue gas purification systems, and mineral slurry transportation pipelines, withstanding high temperature, dust wear, and mineral slurry particle corrosion; the valve seat adopts hard alloy surfacing to enhance wear resistance. Also widely used in food and pharmaceutical, marine engineering, and aerospace fields - food production line material control, ship ballast water systems, rocket fuel filling systems - meeting special industry requirements.
Quality Assurance
Every Pneumatic Gate Valve is manufactured and tested per API 600, GB 12234, MSS SP-81, ISO 9001. Raw materials MTR-verified with chemical/mechanical tests. Castings 100% RT/UT inspected; hard-alloy seat hardness/PT verified. Flanges 100% verified per ANSI B16.5/DIN/JIS/GB. OS&Y engagement verified. Pneumatic cylinder pressure/leak/stroke tested; solenoid and limit switches function tested; optional Exd IIB/IIC ATEX/IECEx, IP65/IP67 verified. Valves get dimensional, shell 1.5×, seat 1.1× per API 598, air bubble test. Manual override and buffer tested. Units ship with MTR, test certs, 18-month warranty, BV/SGS, CE/PED on request.
FAQ
Q1: What is the difference between single-acting and double-acting pneumatic actuators?
A: Double-acting actuators use compressed air for both opening and closing strokes, providing full torque in both directions, standard for general service with reliable air supply, holding position on air failure. Single-acting spring-return actuators use air for one stroke and a spring for the opposite, automatically driving to a pre-set fail-open/fail-close position on air loss, required for safety-critical ESD and hazardous media applications.
Q2: What air supply pressure is required, and what happens on air failure?
A: Requires 0.4–0.8 MPa clean dry filtered instrument air. On air failure: double-acting valves hold current position; single-acting spring-return valves automatically move to their fail-safe position. Manual override handwheel enables manual operation during outages. Air receiver tanks are recommended for safety-critical installations.
Q3: What is the difference between soft seal and hard seal?
A: Soft seals (PTFE/NBR/EPDM/FKM) achieve zero leakage, suitable for water, oil, gas and chemical service up to ~210°C. Hard metal seals (Stellite alloy) withstand up to 550°C and abrasive slurries/particulates, with controlled leakage per API 598, suitable for high-temperature steam and severe service.
Q4: Can a pneumatic gate valve be used for throttling?
A: No. Gate valves are designed for fully open/fully closed on-off isolation only. Partially open operation causes high-velocity erosion of sealing surfaces, cavitation and vibration, leading to premature leakage and damage. Use a globe control valve or V-port ball valve for flow regulation.
Q5: What maintenance is required?
A: Periodic valve exercising every 6–12 months; regular air filter/regulator cleaning and condensate drainage. Inspect cylinder for corrosion and air leakage; verify solenoid and limit switch function. Monitor packing gland for leakage; inspect seat/gate surfaces during major overhauls every 5–10 years.
Hot Tags: Pneumatic Gate Valve | Single/Double Acting Wedge Gate, China Pneumatic Gate Valve | Single/Double Acting Wedge Gate manufacturers, suppliers, factory, automatic gate valve, double flange sluice valve, pvc gate valve 3 inch, 1 2 brass gate valve, 150mm sluice valve, 36 gate valve
| Item | Specification |
|---|---|
| Product Name | Pneumatic Gate Valve |
| Valve Type | OS&Y wedge gate valve; bolted bonnet; pneumatic cylinder actuation; on-off isolation |
| Design Standard | API 600, GB 12234, MSS SP-81 |
| Body Material | 304/316/316L Stainless Steel, WCB Carbon Steel, Ductile Iron, Cast Iron |
| Gate/Stem Material | Stainless steel, carbon steel; hard alloy overlay (optional) |
| Seal Material | PTFE, RPTFE, NBR, EPDM, FKM/Viton; Metal-to-metal hard alloy |
| Nominal Diameter | DN15 – DN600 (NPS 1/2" – 24") |
| Nominal Pressure | PN10 – PN40 (ANSI Class 150 – Class 300) |
| Operating Temperature | Soft seal: -29℃ ~ 210℃; Hard seal: -40℃ ~ 550℃ |
| Actuator Type | Double-acting; Single-acting (spring-return fail-open/fail-close); with manual override |
| Air Supply Pressure | 0.4 – 0.8 MPa (clean dry filtered instrument air) |
| Protection & Explosion-proof | IP65 (standard); IP67 (optional); Ex d IIB T4 / Ex d IIC T6 (optional, ATEX/IECEx) |
| Connection Type | Flanged (RF per ASME B16.5, DIN, JIS, GB/T 9113) |
| Test Standard | API 598; Shell 1.5×Pr, Seat 1.1×Pr, air bubble test |
| Warranty | 18 months from shipment |







