Medium-pressure Flat Gate Valve | API 6D Floating Preloaded Seat Bidirectional Gate Valve

Medium-pressure Flat Gate Valve | API 6D Floating Preloaded Seat Bidirectional Gate Valve
Details:
Welcome to our Medium-pressure Flat Gate Valves product page, industrial valves engineered for tight sealing and long life in medium-pressure pipelines at PN1.6–6.4MPa (Class 150–300). Featuring parallel gate plates with floating preloaded seats, auxiliary grease injection sealing, and ultra-low flow resistance, our valves solve traditional valve pain points including leakage and hard operation. Compliant with API 6D, ASME B16.34, and JB/T 5298, they serve oil, gas, water, petrochemical, and power applications worldwide.
Send Inquiry
Add To Inquiry
Download
Description
Technical Parameters

Product Introduction

 

Our Medium-pressure Flat Gate Valve adopts a parallel gate plate design optimized for medium-pressure service. The floating seat with built-in preloading force and O-ring secondary seal ensures reliable bidirectional sealing, while the straight-through full-bore channel delivers low flow resistance and supports pipeline pigging. Opening and closing torque is approximately half that of conventional wedge gate valves, enabling effortless operation. Available in multiple drive modes with ordinary and anti-sulfur material variants, it provides stable on-off control for oil, gas, water, steam and chemical pipelines in full compliance with global pipeline standards.

 

Product Features

 

1. Floating Preloaded Seat Bidirectional Sealing: Adopts a floating valve seat structure with built-in preloading spring force and O-ring secondary seal, achieving reliable bidirectional sealing at both inlet and outlet directions. The preloaded design ensures initial seat contact even at low pressures, while medium pressure further energizes the seal at higher pressures, maintaining consistent zero-leakage performance across the full operating pressure range from PN1.6 to PN6.4.

2. Auxiliary Grease Injection & Zero External Leakage: The stuffing box is equipped with an auxiliary sealing grease injection fitting, allowing on-line injection of specialized valve sealant to rejuvenate stem packing and eliminate external leakage without pipeline shutdown or valve disassembly. This innovative design directly solves the common chronic problem of packing gland leakage in traditional gate valves, ensuring long-term system safety and reducing maintenance frequency in critical service.

3. Low Flow Resistance & Pigging Capability: The straight-through full-bore channel design ensures smooth, unobstructed fluid flow when fully open, with flow resistance equivalent to a short straight pipe section and virtually no pressure loss, reducing pumping energy consumption and improving overall pipeline efficiency. The full-bore passage also accommodates pipeline pigging using ball scrapers and cleaning pigs, maintaining pipeline cleanliness and unobstructed flow in oil and gas transmission lines.

4. Low-Torque Operation & Multi-Drive Flexibility: Opening and closing torque is only approximately half that of ordinary gate valves, thanks to the parallel non-wedging gate design, making manual operation extremely labor-saving. It supports multiple driving modes including manual handwheel, electric, pneumatic, hydraulic, and bevel gear operators to meet diverse installation and automation requirements. Open/close position is controlled by adjustable travel switches, simplifying operation without complex torque adjustment.

5. Durable Hardfaced Construction & Corrosion Resistance: Key components are manufactured from high-quality carbon steel (WCB/WC6), stainless steel (CF8M), and alloy steel (LCB) with precision machining. The gate plate incorporates precision guide strips for stable, deviation-free movement, and sealing surfaces are spray-welded with Stellite hard alloy for enhanced wear and erosion resistance. This construction ensures reliable performance in various harsh working environments and significantly extends service life.

6. Anti-Sulfur & Wide Temperature Adaptability: Available in three temperature variants: ordinary type (-29°C to 121°C), basic type (-2°C to 121°C), and anti-sulfur type (-45°C to 21°C) certified per NACE MR0175/ISO 15156 for H₂S/CO₂-containing sour service. Body and trim materials are selected to resist sulfide stress cracking (SSC) and hydrogen-induced cracking (HIC), making these valves suitable for sour gas, crude oil, propane, ethylene, and nitric acid media across oilfield, refinery, and petrochemical applications.

 

Working Principle

 

The Medium-pressure Flat Gate Valve operates on the parallel slide gate principle. The actuator drives the stem to lift or lower the parallel gate between floating seats: fully open, the gate retracts above the bore for unobstructed full-bore flow and pig passage; closing, springs and pressure push seats against gate faces, forming bidirectional seals with O-ring backup. Auxiliary grease injection allows on-line stem seal replenishment. Unlike wedge valves, the parallel gate slides without wedging force, cutting torque ~50% for uniform wear.

 

Application Scenarios

 

Oil & Gas Transmission & Offshore: Oil and gas exploration, long-distance transmission pipelines, refinery battery limits, storage facilities, and marine/offshore engineering pipeline systems, including H₂S/CO₂-containing sour service with anti-sulfur material configurations.

Petrochemical & Chemical Processing: Petrochemical plants and chemical production systems conveying corrosive media, solvents, propane, ethylene, nitric acid, and process fluids requiring reliable bidirectional isolation and low maintenance.

Water Supply & Industrial Parks: Water supply and drainage systems in industrial parks, circulating water networks, and wastewater treatment facilities, where low flow resistance reduces pumping energy and full-bore design prevents debris accumulation.

Thermal Power & Steam Systems: Thermal power plants, hydropower stations, ash removal systems, and steam, feedwater, and cooling water pipelines, providing dependable on-off isolation with low operating torque for frequent cycling.

Mining & Metallurgy: Coal washing pipelines, mineral slurry lines, ash discharge systems, and ore pulp conveying, where hardfaced Stellite seats resist erosion from abrasive suspended particles and the parallel gate design resists clogging.

 

Quality Assurance

 

Every Medium-pressure Flat Gate Valve is manufactured and tested per API 6D, ASME B16.34, JB/T 5298, and ISO 9001:2015. Raw materials are MTR-verified by heat number with chemical/mechanical testing. Each valve undergoes dimensional inspection, shell test at 1.5× and seat test at 1.1× per API 6D/GB/T 13927, with low-pressure air testing for gas service. Anti-sulfur models are certified per NACE MR0175/ISO 15156 with HIC/SSCC testing as required. NDT includes MT/PT on castings and welds. Units ship with serialized MTR, test certificate, and 18-month warranty, with BV/SGS/TUV inspection on request.

 

FAQ

 

Q1: What pressure range qualifies as "medium-pressure" for these flat gate valves?

A: These valves cover nominal pressure ratings from PN1.6 to PN6.4 MPa, corresponding to ANSI Class 150 and Class 300. This range is optimized for the most common industrial pipeline pressure classes - above low-pressure municipal distribution and below high-pressure transmission.

 

Q2: How does the floating preloaded seat differ from a fixed seat design?

A: A floating preloaded seat is held by springs that allow limited lateral movement, automatically compensating for body distortion, thermal expansion and minor misalignment while maintaining consistent contact force. Preload ensures sealing even at very low pressures, and medium pressure further energizes the seat, delivering more reliable bidirectional sealing and longer seat life than fixed seat designs.

 

Q3: What is the auxiliary grease injection feature and how does it work?

A: The auxiliary grease injection fitting on the stuffing box allows on-line injection of specialized sealant grease into the packing chamber while the valve is in service, filling micro-gaps and forming a temporary secondary seal. It eliminates the need for shutdown, packing replacement or valve removal for minor stem leakage issues.

 

Q4: Are these valves suitable for sour gas (H₂S/CO₂) service?

A: Yes. Dedicated anti-sulfur variants certified per NACE MR0175/ISO 15156 are available, operating from -45℃ to 21℃. They use materials resistant to sulfide stress cracking (SSC) and hydrogen-induced cracking (HIC). Provide gas composition details for accurate material recommendation.

 

Q5: Can a medium-pressure flat gate valve be used for throttling or flow regulation?

A: No. Like all gate valves, it is designed for fully open or fully closed on-off isolation service only. Partially open operation causes high-velocity media to erode hardfaced sealing surfaces, leading to premature leakage and irreversible seat damage. Use a globe/control/V-port ball valve for throttling service.

 

Hot Tags: Medium-pressure Flat Gate Valve | API 6D Floating Preloaded Seat Bidirectional Gate Valve, China Medium-pressure Flat Gate Valve | API 6D Floating Preloaded Seat Bidirectional Gate Valve manufacturers, suppliers, factory, valve wedge, gate valve 5 inch, gate valves for water, soft seal gate valve, high temperature gate valve, 1 4 gate valve

Item Specification
Product Name Medium-pressure Flat Gate Valve
Valve Type Parallel slide flat gate valve; floating preloaded seat; auxiliary grease injection
Nominal Diameter DN50 – DN1000 (NPS 2" – 40")
Nominal Pressure PN1.6, PN2.5, PN4.0, PN6.4 MPa (ANSI Class 150 / Class 300)
Operating Temperature Ordinary: -29℃~121℃; Basic: -2℃~121℃; Anti-sulfur: -45℃~21℃
Body Material WCB, WC6, LCB, CF8M (carbon / stainless / alloy steel)
Gate Plate Material 2Cr13+ENP, 20CrMoV+STL, AISI 410+ENP, AISI 316+ENP
Valve Seat Material 25+PTFE, 20CrMoV+STL, A105+PTFE, A182-F316+PTFE
Seal Structure Floating preloaded seat + O-ring secondary seal + auxiliary grease injection
Drive Mode Manual, Electric, Pneumatic, Hydraulic, Bevel Gear
Connection Type Flanged (ANSI B16.5 / JB/T 79), Threaded, Butt Welded
Design Standard API 6D, ASME B16.34, JB/T 5298, GB/T 13927
Anti-Sulfur Certification NACE MR0175 / ISO 15156 (optional)
Warranty 18 months from shipment
Send Inquiry