Product Introduction
Our Welded Electric Gate Valve combines a full-welded bonnetless body with a DZW/BZ series electric actuator, eliminating flange gasket leakage risks for high-pressure, high-temperature service. The actuator drives vertical gate travel for on-off control, supporting on-site or remote DCS operation to reduce labor and improve safety. The middle cavity adopts a pressure self-tightening seal - the higher the internal pressure, the tighter the seal - while Stellite hardfaced seats handle temperatures up to 570°C. Butt-weld ends deliver permanent leak-free joints; manual-electric switchover enables handwheel operation during power loss. Ideal for high-altitude, high-pressure and hazardous environment installations.
Product Features
1. Superior Sealing with Stellite & Pressure Self-Tightening: The sealing surfaces of the valve seat and gate are overlaid with Stellite cobalt-based hard alloy, providing excellent wear resistance, high-temperature resistance, and corrosion resistance with service temperatures up to 570°C. The middle cavity adopts a bonnetless pressure self-tightening sealing structure - the higher the internal cavity pressure, the more tightly the seal is compressed, delivering inherently reliable sealing that actually improves at elevated pressures. This design effectively prevents medium leakage and ensures safe pipeline operation even under extreme high-pressure conditions where conventional bolted bonnet valves may struggle.
2. High Strength & Durable Alloy Construction: The valve body is available in WCB carbon steel, WC6/WC9 chromium-molybdenum steel (including 12Cr1MoV), Cr5Mo, 1Cr18Ni9Ti, and 316L stainless steel, meeting pressure requirements from PN16.0 to PN50.0 MPa (Class 150 to Class 3000) with strong pressure-bearing capacity and impact resistance. The valve stem is quenched, tempered, and nitrided for excellent corrosion resistance and anti-scuffing (galling) performance, significantly extending valve service life in high-temperature and high-cycle service. All materials are heat-number traceable with full MTR documentation.
3. Full-Welded Butt-Weld Structure: The branch pipe ends adopt butt-weld (BW) connection in compliance with GB/T 12224, ANSI B16.25, or 78DG standards, and can also be customized per user pipeline specifications. The integrated full-welded structure eliminates the leakage risk associated with flange gaskets and bolted connections, making it far more suitable for high-pressure, high-temperature, radioactive, and hazardous media environments where zero external leakage is critical. The welded construction also provides higher structural integrity and resistance to pipeline vibration and thermal cycling.
4. Intelligent Electric Actuation with DCS Integration: Equipped with DZW series multi-turn electric actuator (or BZ series, optional), supporting AC220V/AC380V power supply (DC24V customizable), with compact housing, light weight, and complete functions. It features a manual-electric switching mechanism that allows handwheel operation during power failures or for commissioning, ensuring continuous valve operability. It can be integrated with program-controlled computers and DCS/SCADA systems to realize automatic control, remote monitoring, and interlocked operation sequences, adapting to the needs of intelligent industrial production and unattended pipeline stations.
5. Wide Application & Media Range: It can be used to control the on-off of water, steam, oil, corrosive media, high-temperature gas, and other fluids, and is widely deployed in thermal power, petrochemical, metallurgy, natural gas transmission, water treatment, offshore oil, nuclear power (non-nuclear grade), and pharmaceutical industries. The broad material selection and pressure/temperature range (PN16–PN50, -29°C~570°C) allow it to adapt to various harsh working conditions across multiple industrial sectors, from boiler feedwater systems to main gas transmission lines.
6. Compact Design & Easy Maintenance: The structure is compact and reasonable, with small volume and light weight relative to its pressure rating, convenient for installation and space-saving in crowded pipe racks. The sealing ring is detachable and easy to replace during overhaul. Regular maintenance only requires injecting lubricating grease into the grease injection fitting to lubricate stem threads and bearings, reducing maintenance cost and workload. The electric actuator's modular design allows quick replacement of motor, gearbox, or control components without removing the valve from the pipeline, minimizing downtime.
Working Principle
The Welded Electric Gate Valve uses the wedge gate principle with bonnetless pressure self-tightening body and electric actuator. The DZW/BZ actuator rotates the stem; Acme threads lift or lower the wedge: open, it retracts above the bore for unobstructed flow; closing, the Stellite wedge seats for zero leakage. The bonnetless cavity uses a pressure self-tightening seal - internal pressure compresses it, so higher pressure means tighter sealing. Butt-weld ends eliminate flange gasket leaks. Manual-electric clutch allows handwheel operation on power loss.
Application Scenarios
Thermal Power Industry: Used for on-off control of water, steam, and superheated steam pipelines in boiler feedwater systems and turbine bypass systems, adapting to the high-temperature and high-pressure working conditions of power stations. The bonnetless pressure self-tightening design and Stellite seats provide reliable long-term service in main steam and feedwater lines where leakage would cause significant efficiency loss and safety hazards.
Petrochemical Industry: Suitable for oil product transportation, corrosive medium processing, and on-off control of pipelines in refineries and chemical plants, with strong corrosion resistance and pressure-bearing capacity. The full-welded construction eliminates flange leak points, making it ideal for hazardous and toxic hydrocarbon service where environmental and safety regulations demand zero external leakage.
Metallurgical Industry: Used for cutting off high-temperature and high-pressure gas pipelines in smelting and processing operations, adapting to harsh working environments such as high temperature, dust, and vibration. The robust welded body and Stellite hardfaced seats withstand abrasive blast furnace gas and cooling water circuits reliably.
Natural Gas Industry: Used in natural gas exploration, gathering, and long-distance transmission pipelines as a main line shut-off valve, with remote electric control via DCS/SCADA to ensure pipeline safety and rapid emergency isolation. The butt-weld ends provide permanent leak-free joints suitable for buried high-pressure gas mains, and the actuator supports fail-safe configurations.
Other Industries: Also applicable to water treatment, offshore oil platforms, nuclear power (non-nuclear grade systems), pharmaceutical manufacturing, and district heating networks, providing reliable on-off control solutions for various pipeline systems. Alloy steel and stainless steel options cover cryogenic through high-temperature service, and custom configurations are available for specialized project requirements.
Quality Assurance
Every Welded Electric Gate Valve is manufactured and tested per JB/T 3595, API 600, ASME B16.34, ISO 9001. Raw materials MTR-verified by heat number with chemical/mechanical tests. Each valve gets dimensional check, shell 1.5×, seat 1.1× per API 598, air test. Stellite seats 100% inspected, hardness checked. Weld ends per ANSI B16.25; welds 100% RT/UT. Stems verified for nitriding hardness. Actuators tested for torque, limits, clutch, insulation. Units ship with MTR, test certs, NDT report, 18-month warranty, BV/SGS/TUV on request.
FAQ
Q1: What is a welded electric gate valve and what does "bonnetless pressure self-tightening" mean?
A: A welded electric gate valve is a high-pressure gate valve that combines a full-welded (butt-weld end) valve body with an electric actuator for automatic on-off control. The term "bonnetless" means the valve does not use a conventional bolted bonnet (valve cover) to close the middle cavity - instead, the top of the body is an integral forged or welded structure. "Pressure self-tightening" refers to the middle cavity seal design: a sealing ring (typically flexible graphite with a wedge ring) is installed such that the system's own internal pressure pushes against and compresses the seal. The higher the internal pressure, the more tightly the seal is compressed - so sealing performance actually improves as pressure increases, rather than degrading as in conventional gasketed bonnet designs. This makes the valve inherently reliable at very high pressures (up to PN50 / Class 3000) and eliminates bolted bonnet leak paths.
Q2: Why use butt-weld connection instead of flanged connection?
A: Butt-weld (BW) connection provides several critical advantages for high-pressure, high-temperature, and hazardous service: (1) Zero leak path - a properly executed weld creates a permanent, integral joint with no gasket that can degrade, blow out, or leak over time, unlike flanged connections which rely on gaskets and bolt preload. (2) Higher pressure and temperature rating - welded joints maintain full structural integrity at extreme pressures and temperatures where flange gaskets would fail. (3) Resistance to vibration and thermal cycling - welded joints do not loosen under pipeline vibration or repeated thermal expansion/contraction cycles. (4) Smaller footprint and lighter weight - no flanges means less material and narrower installation width. The tradeoff is that welded valves cannot be easily removed for maintenance; they are intended for long-term permanent installation. For applications requiring periodic valve removal, flanged versions are available on request.
Q3: What electric actuator options and control signals are available?
A: Standard configuration is the DZW series multi-turn electric actuator, with BZ series available as an option. Power supply options include AC220V, AC380V, and customizable DC24V. Control modes include: (1) On/off (switch-type) with open/close limit switches and torque overload protection; (2) Regulating (modulating) type with 4-20mA analog control signal and position feedback for proportional control; (3) Integral type with local control panel and remote DCS/SCADA interface. Standard features include manual-electric clutch (handwheel override), torque switch (overload protection), travel limit switches, position indicator, and phase protection. Optional features include explosion-proof actuators (Exd IIB T4 for hazardous areas), fail-safe spring return, heating elements for cold climates, and various communication protocols (Modbus, Profibus, HART). All actuators are fully tested and calibrated before shipment.
Q4: Can the valve be operated manually during a power failure?
A: Yes. The DZW/BZ electric actuator is equipped with a manual-electric switching mechanism (clutch) that allows the valve to be operated by handwheel when power is unavailable or during commissioning. To switch to manual mode, simply engage the clutch lever (or pull the handwheel, depending on actuator model) and turn the handwheel to open or close the valve. When power is restored, the actuator automatically re-engages electric mode (or requires manual re-engagement, depending on model). This is a critical safety feature for high-pressure pipeline systems where valves must be operable during power outages for emergency isolation or process shutdown. The handwheel provides sufficient mechanical advantage through the gear reduction train to operate the valve even at full rated pressure, though operation speed is slower than electric mode.
Q5: What body materials, pressure ratings, and temperature ranges are available?
A: Body materials include: WCB (carbon steel, general purpose to 425°C), WC6 (1.25Cr-0.5Mo, to 550°C), WC9 (2.25Cr-1Mo, to 570°C), Cr5Mo (5Cr-0.5Mo, high-temperature hydrogen service), 12Cr1MoV (Chinese alloy steel for power station steam), 1Cr18Ni9Ti, and 316L (stainless steel for corrosive and low-temperature service). Standard pressure ratings are PN16.0 to PN50.0 MPa (ANSI Class 150 to Class 3000). Temperature range is -29°C to 570°C depending on material selection - carbon steel WCB is suitable from -29°C to 425°C, while WC6/WC9 alloy steels extend high-temperature service to 550–570°C for superheated steam. Sizes range DN50 to DN800, with larger sizes customizable on request. Valve stem materials include 2Cr13, 1Cr17Ni2, 25Cr2Mo1VA, and 316L, matched to the body material and service conditions.
Hot Tags: Welded Electric Gate Valve | Bonnetless Pressure Self-Tightening Wedge Gate, China Welded Electric Gate Valve | Bonnetless Pressure Self-Tightening Wedge Gate manufacturers, suppliers, factory, slide gate pneumatic, drum gate valve, demco gate valve, automatic gate valve, gate valve underground, 1 1 2 brass gate valve
| Item | Specification |
|---|---|
| Product Name | Welded Electric Gate Valve |
| Valve Type | Wedge gate valve; full-welded bonnetless; pressure self-tightening; electric actuated |
| Nominal Diameter | DN50 – DN800 (NPS 2" – 32"); larger sizes customizable |
| Nominal Pressure | PN16.0 – PN50.0 MPa (ANSI Class 150 – Class 300) |
| Operating Temperature | -29℃ ~ 570℃ (material dependent) |
| Body Material | WCB, WC6, WC9, Cr5Mo, 12Cr1MoV, 1Cr18Ni9Ti, 316L (customizable) |
| Seal Material | Stellite cobalt-based hard alloy, Flexible Graphite, PTFE |
| Stem Material | 2Cr13, 1Cr17Ni2, 25Cr2Mo1VA, 316L; quenched, tempered & nitrided |
| Connection Type | Butt Weld (BW); per GB/T 12224, ANSI B16.25, 78DG |
| Actuation Type | DZW/BZ series multi-turn electric; manual-electric switchable |
| Power Supply | AC220V / AC380V (DC24V customizable); optional explosion-proof Exd IIB T4 |
| Control Signal | On/off switch, 4-20mA modulating, DCS/SCADA compatible, position feedback |
| Design Standard | JB/T 3595, API 600, ASME B16.34 |
| Test Standard | API 598, ISO 5208; weld 100% RT/UT |
| Warranty | 18 months from shipment |







