Product Introduction
The Tubing Hanger Plug is a high-performance downhole barrier tool used to seal, protect, and suspend tubing strings in wellhead systems - serving as a shallow-set secondary barrier for subsea and onshore well suspension, and providing reliable wellbore sealing with trapped pressure minimization and operational safety. It is specifically designed to fit seamlessly with wellhead tubing strings from 2-1/16" to 7-1/8" per API 6A standards, ensuring a tight and secure fit that prevents fluid leakage and debris entry during well suspension periods. For wellhead applications, the plug achieves V0-rated barrier performance when the sliding sleeve is closed - providing zero-leakage sealing that qualifies as a secondary well barrier during well suspension. The plug supports remote opening and closing via an electronic trigger (e-trigger) with flexible pressure signatures, allowing operators to suspend wells for 6 to 18 months and remotely activate the plug from the production platform without intervention. The e-trigger system provides reliable, verifiable remote operation - a critical capability for subsea wells where rig-based intervention is costly and logistically complex. The plug is equipped with control line clamps that securely route 5 or more control lines past the plug body, avoiding interference with other well operations and ensuring safe installation of vertical christmas trees. After remote opening, the plug maintains a full-bore internal diameter - ensuring unobstructed fluid flow and full compatibility with subsequent well operations including production, stimulation, and intervention. The step-design body allows easy insertion into tubing until it clicks into place, ensuring a positive, leak-proof seal without complex installation tools. Constructed from high-performance materials including carbon steel, stainless steel, titanium, monel, and 90/10 copper-nickel - selected for corrosion resistance and pressure-holding capability in harsh downhole and subsea environments - the plug is rated up to 6,500 PSI (448 bar) for mechanical models, with customizable pressure ratings from 2,000 to 20,000 PSI for high-pressure well applications. It is compatible with production packers, vertical christmas trees, and other wellhead equipment, and is widely used in major operator subsea campaigns and onshore completions requiring reliable secondary barrier performance during well suspension. A separate packaging/retail version is also available for cleartec tubes, TRC and TRO series tubing, and closed-end tubes - providing a low-cost retail packaging solution with top-hole design for hanging display. (Note: For packaging-specific specifications, materials including polypropylene and LDPE, FDA food-grade certification, and sizes from 3/8" to 3", please contact us separately - the wellhead and packaging versions are distinct products with different specifications.)
Product Features
1. V0-Rated Barrier Sealing with Sliding Sleeve
Adopts a step-design body that allows easy insertion into tubing until it clicks into place, ensuring a tight, leak-proof seal. For wellhead applications, the plug achieves V0-rated barrier performance when the sliding sleeve is closed - providing zero-leakage sealing that qualifies as a secondary well barrier during well suspension. The sliding sleeve mechanism minimizes trapped pressure above and below the plug, ensuring operational safety and allowing controlled pressure equalization before opening. The V0 rating is verified through hydrostatic pressure testing to API 6A standards.
2. E-Trigger Remote Control for 6–18 Month Suspension
For wellhead models, the plug supports remote opening and closing via an electronic trigger (e-trigger) with flexible pressure signatures - allowing operators to suspend wells for 6 to 18 months and remotely activate the plug from the production platform without rig-based intervention. The e-trigger system provides reliable, verifiable remote operation with pressure-based activation that can be customized to specific well conditions. This is a critical capability for subsea wells where intervention is costly, and for temporary well suspension programs where the well must be sealed and later re-entered remotely.
3. Control Line Clamps for 5+ Lines
Equipped with dedicated control line clamps that securely route 5 or more control lines (hydraulic, chemical injection, electrical) past the plug body - avoiding interference with the plug's sealing and sliding sleeve mechanisms, and ensuring safe installation of vertical christmas trees. The clamps protect control lines from damage during installation and operation, and maintain proper line spacing and routing through the wellhead. This is essential for modern subsea completions with multiple control line functions.
4. Full-Bore ID After Remote Opening
After e-trigger remote opening, the plug maintains a full-bore internal diameter - ensuring unobstructed fluid flow and full compatibility with subsequent well operations including production, well stimulation, coiled tubing intervention, and wireline operations. The full-bore design eliminates the need for plug removal or drill-out after opening, reducing non-productive time and operational cost. The sliding sleeve retracts fully into the plug body, leaving no obstruction in the flow path.
5. High-Performance Material Selection
Available in high-performance materials including carbon steel, stainless steel (316L, duplex, super duplex), titanium, monel, and 90/10 copper-nickel - ensuring resistance to corrosion, high pressure, and harsh operating environments including subsea seawater, CO2, and H2S. Material can be customized based on application requirements, wellbore fluid chemistry, and pressure/temperature conditions. Brass and polymer options (polypropylene, LDPE) are available for lower-pressure and packaging applications. All materials are sourced from approved suppliers with material test reports (MTR).
6. Customizable Pressure, Size, and Specifications
Multiple sizes available to fit wellhead tubing sizes from 2-1/16" to 7-1/8" per API 6A standards. Mechanical models rated up to 6,500 PSI (448 bar), with customizable pressure ratings from 2,000 to 20,000 PSI for high-pressure well applications. Custom colors (red, black, natural, blue, green, etc.), sizes, and designs are supported to meet specific project requirements. A packaging/retail version is available in sizes from 3/8" to 3" for cleartec tubes, TRC/TRO series tubing, and closed-end tubes.
7. Easy Installation & Wellhead Equipment Compatibility
No complex tools required for initial installation - the plug can be pushed into place manually or with simple auxiliary equipment, and the step-design click-lock mechanism ensures positive seating. The plug is compatible with production packers, vertical christmas trees, and other standard wellhead equipment, and can be deployed as part of the tubing hanger running string. Installation guides and running procedures are provided with every order.
Working Principle
The Tubing Hanger Plug operates through a combination of mechanical seating, sliding sleeve sealing, and e-trigger remote activation:
Installation and Seating
The plug is inserted into the wellhead tubing string as part of the tubing hanger assembly. The step-design body allows the plug to be pushed into the tubing until it clicks into place - the positive click confirms that the plug is fully seated and the sealing elements are engaged. No complex installation tools are required; the plug can be installed manually or with simple auxiliary equipment. Once seated, the plug provides a primary mechanical seal against the tubing wall.
Sliding Sleeve V0 Sealing
When the sliding sleeve is in the closed position, the plug achieves V0-rated barrier performance - providing zero-leakage sealing that qualifies as a secondary well barrier. The sliding sleeve covers the plug's internal flow path, and elastomer seal elements create a metal-to-elastomer seal that prevents fluid passage in either direction. The V0 rating is verified through hydrostatic pressure testing. The sliding sleeve also minimizes trapped pressure by allowing controlled pressure equalization before opening.
E-Trigger Remote Activation
The electronic trigger (e-trigger) system allows remote opening and closing of the sliding sleeve from the production platform. A pressure signal with a flexible, customizable signature is applied downhole - the e-trigger recognizes the predetermined pressure signature and actuates the sliding sleeve mechanism. This allows operators to suspend wells for 6 to 18 months with the sleeve closed (V0 barrier), and then remotely open the sleeve when production or intervention is required - without rig-based intervention. The e-trigger provides verifiable confirmation of sleeve position.
Control Line Routing
Control line clamps on the plug body securely route 5 or more control lines (hydraulic, chemical injection, electrical) past the plug - maintaining proper line spacing, protecting lines from damage during installation and operation, and ensuring that the control lines do not interfere with the sliding sleeve mechanism or the plug's sealing performance. This is essential for vertical christmas tree installations where multiple control lines must pass through the wellhead.
Full-Bore Access After Opening
When the e-trigger opens the sliding sleeve, the sleeve retracts fully into the plug body - maintaining a full-bore internal diameter through the plug. This ensures unobstructed fluid flow for production, and full compatibility with subsequent well operations including stimulation, coiled tubing, and wireline intervention. No plug removal or drill-out is required after opening.
Customization Capabilities
We offer comprehensive customization to match specific well conditions and project requirements:
• Custom wellhead tubing sizes beyond the standard 2-1/16" to 7-1/8" API 6A range
• Custom pressure ratings from 2,000 to 20,000 PSI (standard mechanical model: 6,500 PSI) • Custom material selection: carbon steel, 316L stainless, duplex/super duplex, titanium, monel, 90/10 copper-nickel, brass, or polymers
• Custom elastomer seal materials (Nitrile, HNBR, Viton, Aflas) for special wellbore fluids
• Custom e-trigger pressure signature settings for remote activation
• Custom sliding sleeve actuation mechanism
• Custom control line clamp configuration (number of lines, line size, routing pattern)
• Custom color coding for project identification (red, black, natural, blue, green, orange, white, yellow)
• Custom suspension duration specifications (standard 6–18 months)
• Custom temperature rating based on material selection
• Packaging/retail version: custom sizes 3/8"–3", custom materials (PP, LDPE), custom colors, FDA food-grade option
• OEM/ODM branding and custom packaging
• Custom running and installation procedures
Lead time for custom orders: 15–25 working days depending on complexity; sample evaluation units available before bulk orders.
Quality Assurance
We are committed to delivering the highest quality Tubing Hanger Plugs to our global clients. Each plug undergoes strict quality control checks throughout the manufacturing process - from raw material selection and component machining to assembly, pressure testing, and e-trigger function verification. Our quality management system is certified to ISO 9001:2015, and wellhead models are manufactured in compliance with API 6A standards for wellhead and christmas tree equipment, with EN 10204 3.1–3.2 material certification available.
Quality Control Process
• Raw Material Inspection: Carbon steel, stainless steel, titanium, monel, 90/10 copper-nickel, brass, and polymer materials sourced from approved suppliers with material test reports (MTR) verifying composition, mechanical properties, and corrosion resistance. EN 10204 3.1 or 3.2 certification available for metallic materials. Elastomer seal materials tested for compatibility with specified wellbore fluids.
• In-Process Control: Precision machining with documented parameters; critical dimensions - plug OD, step-design seating profile, sliding sleeve clearance, seal groove geometry, control line clamp dimensions, and e-trigger housing - inspected at first-article, in-process, and final stages.
• Finished Product Testing:
- Hydrostatic Pressure Seal Test: Each assembled plug tested at rated differential pressure with V0 zero-leakage verification when sliding sleeve is closed
- Sliding Sleeve Function Test: Sleeve opened and closed through full travel to verify smooth operation and positive sealing in closed position
- E-Trigger Function Test: e-trigger activated with predetermined pressure signature to verify remote opening/closing and position confirmation
- Control Line Clamp Test: Clamps load-tested to verify secure holding of control lines under specified conditions
- Step-Design Seating Test: Plug inserted into test tubing to verify positive click-lock seating and seal engagement
- Full-Bore ID Verification: After sleeve opening, internal diameter measured to confirm full-bore access
- Dimensional Inspection: 100% verification of critical dimensions
Warranty
12-month warranty from date of shipment against manufacturing defects, with 24-hour technical support for e-trigger configuration, installation, and troubleshooting.
Application Scenarios
1. Oil & Gas Well Completions - Subsea and Onshore Well Suspension
Ideal for subsea and onshore well completions, serving as a shallow-set secondary barrier for well suspension. It is suitable for major operators' subsea campaigns, supporting well suspension for 6 to 18 months with V0-rated barrier performance when the sliding sleeve is closed, and remote opening from production platforms via e-trigger without rig-based intervention. The control line clamps safely route 5+ control lines past the plug for vertical christmas tree installations, and the full-bore ID after opening ensures unobstructed production and intervention operations. It can be used with production packers, vertical christmas trees, and other wellhead equipment - ensuring reliable wellbore sealing, trapped pressure minimization, and operational safety during temporary well suspension, wellhead maintenance, and extended shut-in periods. The customizable pressure rating (2,000–20,000 PSI) and material options (titanium, monel, super duplex) make it suitable for high-pressure, corrosive, and deepwater environments.
2. Packaging & Retail (Separate Product Version)
A separate packaging/retail version is available for use with cleartec tubes, TRC and TRO series tubing, and closed-end tubes - providing an attractive, low-cost retail packaging solution. The plug's top-hole design fits various retail fixtures and displays, making it easy to hang products for storage or retail showcase. It is widely used for packaging small tools, accessories, and consumer goods, protecting internal products from dust and damage. Materials include polypropylene and LDPE with FDA food-grade and RoHS certification, in sizes from 3/8" to 3". Note: This is a distinct product from the wellhead version with different specifications, materials, and certifications - please contact us for packaging-specific details.
FAQ
Q: What is the V0 barrier rating and how is it verified?
A: V0 is the highest barrier rating per ISO 14310 / API 11D1 standards, meaning zero visible gas leakage at the rated differential pressure. Our Tubing Hanger Plug achieves V0-rated barrier performance when the sliding sleeve is in the closed position. Each plug undergoes 100% hydrostatic pressure seal testing before shipment, with V0 zero-leakage verification documented in the pressure test certificate. The V0 barrier qualifies the plug as a secondary well barrier during well suspension.
Q: How does the e-trigger remote control work?
A: The electronic trigger (e-trigger) system allows remote opening and closing of the sliding sleeve from the production platform. A pressure signal with a flexible, customizable signature is applied downhole - the e-trigger downhole module recognizes the predetermined pressure signature and actuates the sliding sleeve mechanism. This allows operators to suspend wells for 6 to 18 months with the sleeve closed (V0 barrier), then remotely open the sleeve when production or intervention is required - without rig-based intervention. The e-trigger provides verifiable confirmation of sleeve position. Custom pressure signatures can be configured to avoid accidental activation from normal well operations.
Q: How many control lines can the plug accommodate?
A: The plug is equipped with control line clamps that securely route 5 or more control lines (hydraulic, chemical injection, electrical) past the plug body. The exact number and configuration can be customized based on your completion design - including line size, spacing, and routing pattern. The clamps protect control lines from damage during installation and operation, and ensure that lines do not interfere with the sliding sleeve mechanism or sealing performance. This is essential for vertical christmas tree installations with multiple control line functions.
Q: What happens to the wellbore after the plug is remotely opened?
A: After e-trigger remote opening, the sliding sleeve retracts fully into the plug body - maintaining a full-bore internal diameter through the plug. This ensures unobstructed fluid flow for production, and full compatibility with subsequent well operations including stimulation, coiled tubing intervention, and wireline operations. No plug removal or drill-out is required after opening - the plug remains in place as part of the tubing hanger with a clear flow path.
Q: What materials are available and how do I choose?
A: We offer a wide range of materials for wellhead models: carbon steel, stainless steel (316L, duplex, super duplex), titanium, monel, and 90/10 copper-nickel. Material selection depends on wellbore fluid chemistry (CO2, H2S, brine), pressure/temperature conditions, and corrosion requirements. For subsea seawater exposure, titanium or 90/10 copper-nickel are commonly specified. For corrosive wellbore fluids, super duplex or monel may be required. Brass and polymer options (polypropylene, LDPE) are available for lower-pressure and packaging applications. All materials come with material test reports (MTR / EN 10204 3.1–3.2).
Q: What is the pressure rating and can it be customized?
A: Mechanical models are rated up to 6,500 PSI (448 bar). Pressure ratings can be customized from 2,000 to 20,000 PSI for high-pressure well applications - with material and seal configuration adjusted accordingly. Please specify your required working pressure when requesting a quotation, and our engineering team will configure the plug accordingly.
Q: What is the MOQ, delivery time, and payment method?
A: The MOQ is 1 piece for standard models. Standard products ship within 7–15 working days after deposit; custom sizes, materials, pressure ratings, or e-trigger configurations require 15–25 working days. We ship from Shanghai or Ningbo port. Payment terms include T/T (30% deposit, 70% before shipment), L/C at sight, and Western Union. Sample evaluation units available for testing before bulk orders.
Q: What certifications does the wellhead plug have?
A: Wellhead models are manufactured in compliance with API 6A standards for wellhead and christmas tree equipment, with EN 10204 3.1–3.2 material certification available. ISO 9001:2015 quality management system, CE certification, and third-party inspection (BV, SGS, DNV) are available on request. Each plug undergoes 100% hydrostatic pressure seal testing with V0 verification and e-trigger function testing before shipment, with material test reports, pressure test certificates, and installation guides provided with every order. Packaging/retail versions carry FDA food-grade and RoHS certification.
Hot Tags: Tubing Hanger Plug | Subsea Well Suspension | E-Trigger Remote Control | V0 Barrier | 6,500 PSI | Control Line Clamps | Full-Bore ID | API 6A | 2-1/16" to 7-1/8", China Tubing Hanger Plug | Subsea Well Suspension | E-Trigger Remote Control | V0 Barrier | 6,500 PSI | Control Line Clamps | Full-Bore ID | API 6A | 2-1/16" to 7-1/8" manufacturers, suppliers, factory, Drillpipe Wiper Plug, Series Composite Bridge Plug, Shorty Composite Bridge Plug, Inflatable Retrievable Bridge Plug, Hydro Mechanical Set Bridge Plug, Cast Iron Bridge Plug
| Item | Specification | Remarks |
|---|---|---|
| Product Type | Tubing Hanger Plug (Wellhead Version) | Secondary barrier for well suspension |
| Wellhead Tubing Size | 2-1/16" – 7-1/8" (52.4mm – 181.0mm) | Per API 6A standards; custom sizes available |
| Barrier Rating | V0 (zero leakage) with sliding sleeve closed | Per ISO 14310 / API 11D1 |
| Pressure Rating | Up to 6,500 PSI (448 bar) mechanical; customizable 2,000 – 20,000 PSI | High-pressure versions available |
| Temperature Range | Customizable based on material selection | High-temp and low-temp options; specify application |
| Suspension Duration | 6 – 18 months (standard) | Custom duration available |
| Remote Control | E-trigger (electronic trigger) with flexible pressure signatures | Remote open/close from production platform |
| Sliding Sleeve | Yes - closed = V0 barrier; open = full-bore ID | Retracts fully into plug body when open |
| Full-Bore ID After Opening | Yes - unobstructed flow path | No drill-out or removal required |
| Control Line Clamps | Yes - routes 5+ control lines past plug | Custom line count/size/routing available |
| Seating Mechanism | Step-design body with positive click-lock | Manual or simple auxiliary installation |
| Body Material | Carbon steel, 316L stainless, duplex/super duplex, titanium, monel, 90/10 Cu-Ni | Custom based on wellbore chemistry |
| Seal Material | Nitrile (standard); HNBR, Viton, Aflas (custom) | Based on wellbore fluid compatibility |
| Other Material Options | Brass, polypropylene, LDPE (lower-pressure/packaging) | - |
| Color | Standard: Black, Red, Natural; Custom: Blue, Green, Orange, White, Yellow | Project identification |
| Compatibility | Production packers, vertical christmas trees, standard wellhead equipment | - |
| Deployment | Installed as part of tubing hanger running string | Manual/simple auxiliary installation |
| Application | Subsea/onshore well suspension, secondary barrier, wellhead maintenance, extended shut-in | - |
| Standard / Certification | API 6A, EN 10204 3.1–3.2, ISO 9001:2015 | CE, BV/SGS/DNV on request |
| MOQ | 1 piece (standard); custom MOQ on request | - |
| Delivery Time | 7 – 15 working days (standard); 15 – 25 working days (custom) | - |
| Packaging | Individual plastic wrap + export wooden crate | - |
| Wellhead Tubing Size (API 6A) | Nominal OD | Pressure Rating (standard) | V0 Barrier | E-Trigger | Control Lines |
|---|---|---|---|---|---|
| 2-1/16" (52.4mm) | 52.4mm | 6,500 PSI | Yes (sleeve closed) | Yes | 5+ |
| 2-9/16" (65.1mm) | 65.1mm | 6,500 PSI | Yes (sleeve closed) | Yes | 5+ |
| 3-1/8" (79.4mm) | 79.4mm | 6,500 PSI | Yes (sleeve closed) | Yes | 5+ |
| 4-1/16" (103.2mm) | 103.2mm | 6,500 PSI | Yes (sleeve closed) | Yes | 5+ |
| 7-1/8" (181.0mm) | 181.0mm | 6,500 PSI | Yes (sleeve closed) | Yes | 5+ |







