Product introduction
Our Composite Plug (Composite Frac Plug / Composite Bridge Plug) is a high-performance downhole completion tool specifically designed for plug-and-perf operations in oil and gas wells, integrating advanced composite material technology and field-proven structural design to deliver reliable zonal isolation, efficient operation, and significant cost savings for well completions. Crafted with a proprietary blend of premium composites - up to 97% advanced composite content with a low specific gravity of 1.6 - and reinforced with powder metal studs or ceramic button slip inserts, this plug is engineered to meet the rigorous demands of modern wellbore environments including vertical, deviated, horizontal, and multilateral wells, while optimizing run-in speed, milling efficiency, and sealing performance. With a rated working pressure up to 13,000 PSI (896 bar) and temperature resistance up to 300°F (149°C) - with custom high-pressure/high-temperature versions available up to 177°C / 105 MPa for extreme well conditions - the composite plug provides reliable isolation even in HPHT downhole environments. The corrosion-resistant composite material is also suitable for acidic oil and gas fields containing H₂S and CO₂, where traditional metal plugs suffer from corrosion and degradation. Whether for single-zone or multi-zone stimulation, our Composite Plug eliminates the drawbacks of traditional metal plugs - reducing rig time, minimizing debris, and ensuring consistent performance. The optimized design enables ultra-fast milling with drill-out time as little as 5 minutes per plug - up to 65% reduction compared to traditional composite plugs - breaking down into fine, lightweight debris that circulates out easily without equipment blockage. The smooth surface design allows run-in speeds up to 500 ft/min (up to 770 fpm in specific casing sizes), and the anti-rotation design with integrated oblique guide shoes prevents plug rotation during milling, ensuring stable operation. Available in top-ball and internal-ball configurations for 4", 4½", 5", and 5½" casing (custom sizes available), with comprehensive OEM/ODM customization services, this plug is the ideal solution for shale play operators and oilfield service companies seeking to enhance completion efficiency and maximize well productivity.
Product Features
1. Superior Lightweight Composite Material with 1.6 Specific Gravity
Made of high-strength, lightweight composite material with a low specific gravity of 1.6 - significantly lighter than cast iron or steel equivalents - the plug is corrosion-resistant, wear-resistant, and completely free from rust, ensuring long-term reliability in harsh downhole environments including acidic (H₂S/CO₂) wells. The proprietary composite formula (up to 97% composite content) is independently developed and strictly controlled with batch-to-batch quality verification, guaranteeing consistent mechanical performance and drill-out characteristics.
2. Ultra-Fast Milling - As Little as 5 Minutes per Plug
The optimized composite body and structural design enable ultra-fast milling, with drill-out time as little as 5 minutes per plug and up to 65% reduction in mill-out time compared to traditional composite plugs. The plug breaks down into fine, lightweight debris that can be easily circulated out of the wellbore, avoiding equipment blockage, stuck pipe risk, and reducing post-operation clean-up time. The anti-rotation design with integrated oblique guide shoes prevents plug rotation during milling, ensuring stable, predictable drill-out performance and reducing operational failure risk.
3. High-Pressure Sealing and Reliable Anchoring
Equipped with a smooth-molded rubber sealing sleeve and precision-engineered slip system - with powder metal studs or ceramic button inserts - the plug delivers superior sealing performance effective at pressures up to 13,000 PSI (896 bar) and temperatures up to 300°F (149°C), with custom HPHT versions available up to 177°C / 105 MPa. The slip system provides strong anchoring force while remaining easy to mill, preventing premature setting or rotation during operation. The one-slip, bottom-set compression design further enhances operational safety by mitigating debris impacts on critical sealing components.
4. High Run-In Efficiency up to 770 ft/min
The smooth surface design reduces friction, allowing run-in speeds up to 500 ft/min (152.4 m/min) - and up to 770 fpm in 5.5" casing - minimizing the risk of jamming or premature setting in the wellbore. The symmetrical lightweight design also reduces water usage during pump-down operations, further optimizing operational efficiency and reducing environmental footprint. The plug is compatible with hydraulic, electronic, and cumulative setting tools, deployable via wireline, tubing, or coiled tubing.
5. Cost-Effective with Multiple Configurations
Reduces overall rig time and equipment costs by eliminating frequent tripping and reducing milling time - the 5-minute drill-out and lightweight design directly translate to lower per-well completion costs. Available in multiple configurations including top-ball and internal-ball (optional blind design), with casing sizes from 4" to 5½" and custom sizes available, it is suitable for plug-and-perf completions, multi-zone fracturing, and underbalanced operations, adapting to diverse well conditions.
6. Comprehensive OEM/ODM Customization
We offer comprehensive customization to match specific well conditions: custom casing sizes and dimensions, adjusted pressure and temperature ratings, custom configurations (top-ball, internal-ball, or blind design), special material modifications for extreme downhole environments including HPHT and acidic wells, and branding/packaging customization. Customization lead time is 7–15 working days depending on complexity, with sample evaluation available before bulk orders.
Working Principle
The Composite Plug operates in four phases - running-in, setting, isolation and fracturing, and milling and removal:
Phase 1: Running-In
The plug is run into the wellbore via wireline, tubing, or coiled tubing, with the smooth composite surface and oblique guide shoe ensuring smooth movement through the casing at speeds up to 500 ft/min (up to 770 fpm in 5.5" casing). The lightweight design (specific gravity 1.6) and anti-preset features minimize the risk of jamming or premature activation in deviated and horizontal sections.
Phase 2: Setting
Once on depth, the setting tool - hydraulic, electronic, or cumulative - activates the one-slip bottom-set compression mechanism. The slip system, reinforced with powder metal studs or ceramic buttons, expands and anchors firmly to the casing wall. Simultaneously, the smooth-molded rubber sealing sleeve compresses radially to form a tight, pressure-tight seal between the plug body and casing ID. After setting, the setting tool releases and is retrieved.
Phase 3: Isolation and Fracturing
Once set, the slip anchoring and rubber seal create a reliable isolation barrier containing differential pressure up to 13,000 PSI. High-pressure fracturing fluid is pumped through perforations above the plug to create fractures in the target formation. The composite body maintains full structural integrity during stimulation, with the anti-rotation design preventing any movement under high-pressure conditions.
Phase 4: Milling and Removal
After fracturing operations are complete, the composite plug is milled using conventional drilling tools or coiled tubing-deployed motors. The 97% composite construction drills out in as little as 5 minutes per plug - producing fine, lightweight, non-metallic debris that circulates out easily without stuck pipe risk. The anti-rotation oblique guide shoes ensure stable milling without plug spinning, enabling fast, efficient drill-out and rapid well turnaround for production.
Quality Assurance
Quality is our top priority. All Composite Plugs are manufactured under an ISO 9001:2015 certified quality management system and designed in accordance with API 11D1 specifications for downhole packers and bridge plugs. Every plug undergoes strict quality control protocols throughout the production process:
Raw Material Inspection
Premium composite materials are strictly screened and tested for fiber content, resin matrix composition, specific gravity (target 1.6), tensile strength, compressive strength, and heat deflection temperature. Powder metal studs and ceramic button inserts are verified for hardness and bonding strength. Rubber sealing materials are tested for hardness, tensile strength, compression set, and fluid compatibility.
In-Process Manufacturing Control
Precision molding, bonding, and curing processes are performed with real-time monitoring and documented process parameters. Critical dimensions - outer diameter, seal groove dimensions, slip tooth geometry, and guide shoe fit - are inspected at first-article, in-process, and final inspection stages using calibrated measuring instruments.
Finished Product Testing (100% of production)
• Hydrostatic Pressure Seal Test: Each assembled plug is tested at rated differential pressure (13,000 PSI) with zero visible leakage as the pass criterion
• Milling Performance Test: Representative samples from each production lot are milled to verify drill-out time within the 5–15 minute specification and cutting size/weight characteristics
• Setting Function Test: Sample plugs are set in test casing to verify slip expansion, seal compression, and anti-preset function for all setting methods
• Dimensional Inspection: 100% verification of critical mating dimensions against engineering drawings
Warranty and Support
We provide a 12-month warranty from the date of shipment against manufacturing defects in materials and workmanship. Our engineering team provides 24-hour technical consultation, free construction guidance, and lifelong technical maintenance support.
Customization Service
We understand that different well conditions require tailored solutions. We offer comprehensive OEM/ODM customization services:
• Custom casing sizes and dimensions according to your wellbore specifications
• Adjustment of working pressure and temperature ratings (HPHT versions up to 177°C / 105 MPa)
• Custom configurations: top-ball, internal-ball, or blind (solid-bore) design
• Special material modifications for extreme downhole environments (acidic H₂S/CO₂ wells, high-salinity)
• Branding and packaging customization
• Custom slip insert options: powder metal studs or ceramic buttons
Lead time for customization: 7–15 working days depending on complexity; sample evaluation units available before bulk order. MOQ for custom configurations on request.
Application Scenarios
1. Multi-Stage Fracturing Operations (Core Scenario)
Widely used in segmented plug-and-perf fracturing of horizontal and deviated wells, realizing precise isolation of formations and improving fracturing effectiveness. Suitable for large-scale fracturing of unconventional oil and gas including shale gas and tight oil, and independent fracturing of multilateral wells to avoid interlayer interference and increase single well production. The 5-minute fast drill-out and 770 fpm run-in speed are particularly valuable in long-lateral horizontal wells where efficiency directly impacts well economics.
2. Well Completion and Workover Operations
Used for temporary plugging of oil and gas wells including well abandonment, formation isolation, and plugging before workover operations; temporary sealing before casing repair or patching to prevent fluid leakage; and formation separation during well completion to realize layered production and layered testing. The corrosion-resistant composite material is suitable for older wells where casing integrity may be compromised.
3. Special and Extreme Well Conditions
Adaptable to high-temperature and high-pressure wells (up to 300°F / 13,000 PSI standard, custom versions up to 177°C / 105 MPa) with stable sealing and no failure; suitable for acidic oil and gas fields (H₂S/CO₂) with corrosion-resistant composite materials and longer service life; the lightweight design ensures smooth running without sticking risk in high-angle and horizontal wells; also suitable for underbalanced drilling and completion operations.
FAQ
Q: What is the biggest advantage of your Composite Plug compared with traditional metal plugs?
A: The biggest advantage is ultra-fast drill-out - as little as 5 minutes per plug (typically 5–15 minutes) - which greatly shortens rig time and reduces operational costs. The 97% composite construction produces fine, lightweight debris that circulates out easily without stuck pipe risk. Additional advantages include lightweight design (specific gravity 1.6), corrosion resistance in H₂S/CO₂ environments, high-pressure rating up to 13,000 PSI, and more reliable sealing with smooth-molded rubber sleeves.
Q: Can it adapt to special well conditions (high temperature / high pressure / acidic)?
A: Yes. The standard rating is up to 300°F (149°C) and 13,000 PSI (89.6 MPa). We support customized design for extreme conditions, with high-pressure/high-temperature versions available up to 177°C (350°F) and 105 MPa (15,000 PSI). We can also provide acid-resistant and salt-resistant special composite materials to adapt to H₂S/CO₂ acidic wells and high-salinity environments. Contact our engineering team with your well data for custom configuration.
Q: What is the delivery time?
A: Standard models ship within 7–15 working days after deposit; custom sizes or configurations require 15–30 working days. We support urgent order production for qualified projects. We ship from Shanghai or Ningbo port.
Q: Do you provide technical support and after-sales service?
A: Yes. We provide 24-hour technical consultation, free construction guidance, a 12-month quality guarantee, and lifelong technical maintenance support. Our engineering team can assist with product selection, running procedures, drill-out optimization, and field troubleshooting.
Q: What is the minimum order quantity (MOQ) and payment method?
A: The MOQ for standard models is 1 piece, supporting small-batch trial orders, with more favorable pricing for bulk orders. Custom configurations may have a higher MOQ - contact us for details. Payment terms include T/T (30% deposit, 70% before shipment), L/C at sight, and Western Union.
Hot Tags: Composite Plug | Composite Frac Plug | 13,000 PSI | 5-Min Drill-Out | API 11D1 | 97% Composite, China Composite Plug | Composite Frac Plug | 13,000 PSI | 5-Min Drill-Out | API 11D1 | 97% Composite manufacturers, suppliers, factory, One Trip Openhole Cement Plug, Series Composite Bridge Plug, Hydro Mechanical Set Bridge Plug, Liner Wiper Plug, Thermal Bridge Plug, Wireline Set Bridge Plug
| Item | Specification | Remarks |
|---|---|---|
| Product Type | Composite Plug (Composite Frac Plug / Composite Bridge Plug) | Fully drillable; API 11D1 compliant |
| Material | 97% Premium Composite (specific gravity 1.6), reinforced with powder metal studs or ceramic buttons | Low specific gravity; corrosion-resistant |
| Pressure Rating | Up to 13,000 PSI (89.6 MPa / 896 bar) | Custom HPHT version up to 105 MPa |
| Temperature Rating | Up to 300°F (149°C) | Custom version up to 350°F (177°C) |
| Casing Size | 4" (101.6mm), 4½" (114.3mm), 5" (127mm), 5½" (139.7mm) | Custom sizes available |
| Run-In Speed | Up to 500 ft/min (152.4 m/min); Max 770 fpm in 5.5" casing | - |
| Milling Time | As little as 5 minutes per plug (typically 5–15 min) | Up to 65% faster than traditional composite plugs |
| Setting Method | Hydraulic, Electronic, Cumulative Setting Tool | Wireline / Tubing / Coiled tubing deployable |
| Configuration | Top-Ball, Internal-Ball (optional blind/solid-bore design) | - |
| Seal Type | Smooth-molded rubber sealing sleeve | - |
| Slip Type | Precision slip system with powder metal studs or ceramic buttons; one-slip bottom-set compression | Anti-rotation oblique guide shoes |
| Specific Gravity | 1.6 | Low-specific gravity lightweight design |
| Application | Plug-and-perf, multi-stage fracturing, well completion, workover, abandonment, underbalanced, HPHT, acidic (H₂S/CO₂) | Vertical/devitated/horizontal/multilateral wells |
| Standard / Certification | API 11D1, ISO 9001:2015, CE | BV/SGS/DNV third-party inspection on request |
| MOQ | 1 piece (standard); custom MOQ on request | - |
| Delivery Time | 7 – 15 working days (standard); 15 – 30 working days (custom) | - |
| Packaging | Individual plastic tube + export wooden crate | - |
| Casing Size | Casing OD | Configuration Options | Max Run-In Speed |
|---|---|---|---|
| 4" (101.6mm) | 101.6mm | Top-Ball / Internal-Ball | Up to 500 ft/min |
| 4½" (114.3mm) | 114.3mm | Top-Ball / Internal-Ball | Up to 500 ft/min |
| 5" (127mm) | 127.0mm | Top-Ball / Internal-Ball | Up to 500 ft/min |
| 5½" (139.7mm) | 139.7mm | Top-Ball / Internal-Ball | Up to 770 ft/min |







