Double Spring Safety Valve | Boiler Overpressure Protection

Double Spring Safety Valve | Boiler Overpressure Protection
Details:
Welcome to our product page for the Double Spring Safety Valve, a professional overpressure protection device designed to safeguard industrial pressure systems, equipment, and personnel. With its dual-spring parallel design featuring two identical valves on a Y-type joint, it delivers superior reliability, efficient large-capacity pressure relief, and wide adaptability for high-demand scenarios. Whether for boilers, pressure vessels, or pipelines, it ensures stable operation and absolute safety even in extreme conditions worldwide.
Send Inquiry
Add To Inquiry
Download
Description
Technical Parameters

Product Introduction

 

Our Double Spring Safety Valve is a specialized spring-loaded safety valve consisting of two identical valves installed on a Y-type joint, where nominal diameter refers to the joint inlet diameter. Unlike single-spring valves, it integrates two independent valves into one body, sharing the same inlet and common outlet. This parallel double-disc double-spring structure achieves dual pressure monitoring, providing double-layer safety. When pressure exceeds the set limit, it automatically opens to release excess pressure; when pressure drops, it closes automatically to ensure safe stable operation of equipment and pipelines.

 

Product Features

 

1.Dual Safety Assurance: The dual safety mechanism is its key advantage: each disc has an independent spring with set force for dual monitoring. Even if one disc fails from fatigue or wear, the other works independently, avoiding single-point failure and improving system reliability.

2.Efficient Pressure Relief Capacity: The parallel arrangement of two valves doubles the effective discharge area, suitable for large-capacity pressure relief scenarios. It quickly releases excess pressure, preventing equipment damage or explosions from overpressure and minimizing production interruptions. The dual-valve design allows staged opening: one valve opens first at lower overpressure for initial relief, while the second opens at higher overpressure for full discharge, providing flexible pressure management without sudden system shocks.

3.Stable & Durable Construction: The valve body is carbon steel or stainless steel (316L), with corrosion and high-temperature resistance for stable operation in harsh environments. Double stainless springs and precision lapped seats (PTFE or stainless steel) provide wear resistance and tight sealing, reducing maintenance and extending service life.

4.Wide Adaptability: Suitable for steam, air, water, oil, gas, and other non-corrosive or slightly corrosive media, adapting to working temperatures from -29℃ to 350℃ and pressures from 0.6MPa to 10MPa. Available in A38Y, A47H, A48Y series with customizable specifications to match your specific application requirements across diverse industrial systems.

5.Easy Installation & Maintenance: Standard flange or thread connection makes installation and disassembly easy, saving time and labor costs. Equipped with an adjustable blowdown ring and test lever for inline testing as standard, facilitating regular inspection, cleaning, and calibration without full disassembly, reducing maintenance downtime.

6.Certified Quality: Complies with ISO 9001, GB/T 12243, CE, and BS6759 Part 1, passing strict pressure tests at max temperature and over 10,000 cycle tests to ensure quality meets global requirements. Each valve undergoes 100% factory testing including shell test, seat leak test, and set pressure calibration before shipment, with MTR available. Third-party inspection by SGS, BV, or TUV available for critical projects.

 

Working Principle

 

The Double Spring Safety Valve operates through two independent spring-loaded discs on a shared Y-type inlet joint: when pressure remains below the preset limit, both springs hold discs tightly against seats, maintaining zero-leakage shutoff; when pressure exceeds set value, medium pressure overcomes spring force on one or both discs, lifting them to open discharge passages and release excess pressure through the common outlet. The dual design allows staged opening - one disc lifts first at lower overpressure while the second opens at higher pressure - providing graduated relief. When pressure drops to reseating range, springs reclose discs automatically for continuous dual-layer protection without external power.

 

Application Scenarios

 

Boiler Systems: Suitable for industrial boilers, releasing excess pressure in a timely manner to prevent boiler explosion and protect systems from overpressure damage.

Pressure Vessels: Applied to various pressure vessels in chemical, pharmaceutical, food processing, and other industries, protecting vessels from damage caused by overpressure with reliable dual-spring safety assurance and large discharge capacity.

Pressure Pipelines: Used in oil and gas pipelines, water supply drainage, and steam pipelines to prevent rupture from overpressure, with dual-valve design providing doubled discharge area for rapid pressure relief in large-diameter systems.

Petrochemical & Chemical Industry: Widely used in refineries, chemical plants, and petrochemical facilities handling corrosive media, with stainless (316L) body and PTFE sealing providing corrosion resistance and zero leakage for chemical process protection.

Other Industrial Equipment: Applicable to air compressors, heat exchangers, reaction kettles, and other equipment needing overpressure protection, widely used in petroleum, power, and metallurgy industries.

 

Quality Assurance

 

Every Double Spring Safety Valve undergoes rigorous quality control from raw material to finished product. All pressure-bearing components come with EN 10204 3.1 certificates and PMI verification. Critical welds and castings are inspected via NDT including ultrasonic, magnetic particle, and liquid penetrant examination. Each valve is shell-tested at 1.5× rated pressure and seat-tested for zero leakage, with set pressure calibration verified by 3+ tests for both discs. It also undergoes over 10,000 cycle tests and high-temperature pressure testing. Our facility operates under ISO 9001:2015 and CE systems, ensuring traceability in every unit shipped.

 

FAQ

 

Q1: What is a double spring safety valve, and what is its dual-spring advantage?

A: A double spring safety valve has two identical spring-loaded valves on a shared Y-type joint. Its dual-spring advantage is dual-layer safety: each disc has an independent spring, so if one fails, the other works independently to prevent single-point failure. The parallel design doubles discharge area and allows staged opening - one valve lifts first at lower overpressure, the second at higher - providing graduated relief without shocks.

 

Q2: How does staged opening work in the double spring design?

A: In staged opening, two valves are set at different pressures: one opens first at lower overpressure for initial relief while the second stays closed. If pressure keeps rising, the second opens too, doubling discharge area. This graduated response prevents sudden pressure drops and shocks, distributing load to reduce wear.

 

Q3: What pressure, temperature, size, and medium options are available?

A: Pressure: 0.6-10MPa (standard 1.6-4.6MPa). Temperature: -29℃ to 350℃. Size: DN20-DN300. Medium: steam, air, water, oil, gas, non-corrosive or slightly corrosive. Body: carbon steel, stainless 316L (customizable). Spring: stainless steel. Seat: PTFE, stainless. Connection: flange, thread. Models: A38Y, A47H, A48Y. Provide medium, pressure, and pipeline standard for configuration.

 

Q4: What testing and certification does this valve have?

A: Each valve undergoes 100% factory testing: shell test at 1.5× rated pressure, seat leak test (zero leakage), and set pressure calibration for both discs (3+ tests). It also passes pressure tests at max temperature and over 10,000 cycle tests. Certified ISO 9001, GB/T 12243, CE, BS6759 Part 1. MTR and third-party inspection (SGS, BV, TUV) available.

 

Q5: How do I maintain and calibrate this double spring safety valve?

A: Maintenance is simple: blowdown ring and test lever allow inline testing without disassembly. Regular inspection and cleaning recommended, with replaceable seats and springs. Calibrate pressure annually via the adjusting screw on each cap, calibrating both discs independently. Reassembly requires torqueing bolts to spec and leak testing.

 

Hot Tags: Double Spring Safety Valve | Boiler Overpressure Protection, China Double Spring Safety Valve | Boiler Overpressure Protection manufacturers, suppliers, factory, hydraulic relief valve, prv in transformer, air compressor pressure relief valve, hot water tank pressure relief valve leaking, pressure relief valve leaking, thermal expansion relief valve

Item Specification
Product Name Double Spring Safety Valve
Design & Manufacturing Standard GB/T 12243, ISO 9001, CE, BS6759 Part 1, API 520
Nominal Pressure 0.6MPa-10MPa (Standard 1.6-4.6MPa)
Nominal Diameter DN20-DN300 (Customizable)
Operating Temperature -29℃ ~ 350℃
Body Material Carbon Steel, Stainless Steel (316L), Customizable
Trim Material Stainless Steel, 2Cr13, Alloy Steel
Sealing Material PTFE, Stainless Steel (Zero Leakage)
Connection Type Flange, Thread (Customizable, ANSI, DIN, GB)
Operation Mode Automatic (Spring-Loaded, Dual Independent Springs)
Flow Channel Parallel Double-Disc, Shared Y-Type Inlet Joint, Common Outlet
Bonnet Type Standard Bonnet, Bolted Bonnet, Adjustable Blowdown Ring
Test Standard Shell Hydrostatic Test (1.5× Rated), Seat Leak Test, Set Pressure Calibration, 10,000+ Cycle Test
Optional Certifications ISO 9001, CE, GB/T 12243, BS6759 Part 1, MTR EN 10204 3.1, SGS/BV/TUV Third-Party
Send Inquiry