Product Introduction
Our Spring Micro-opening External Thread Safety Valve (A21 series) is a spring-loaded low-lift valve with external thread, the last defense for small-bore pressure equipment, automatically relieving overpressure to prevent damage. It adopts spring direct-load with micro-opening - disc lift only 1/40 to 1/20 of throat - providing precise relief for incompressible liquids (water, oil, hydraulic) requiring small discharge. External thread (M or G/BSP) is compact, screwed directly into equipment. With DN10-80, 0.1-32MPa, ≤200°C, body 2Cr13/SS304/SS316/brass, PTFE or cobalt carbide seal, 50CrVA spring, it serves hydraulic, compressor, refrigeration, and lab equipment.
Product Features
1.Micro-opening Low-Lift Design for Liquids: The core feature is micro-opening (low-lift) design with disc lift 1/40 to 1/20 of throat, precise relief for liquids. Unlike full-lift gas/steam valves, this gradual opening (no pop) releases small volume to reduce pressure, preventing water hammer with quick reseating.
2.Compact External Thread Connection: The external thread (metric M like M27×1.5, or G/BSP, NPT optional) is compact and easy to install - screwed directly into equipment with a wrench, no flanges. Saves space, ideal for narrow spaces, mobile vessels, and compact manifolds. The angle body (inlet bottom thread, outlet side 90°) directs discharge sideways, while the side test pin allows verification. External thread offers lower cost and vibration sensitivity for mobile use.
3.Small Bore + Wide Pressure Range: With DN10-80 small bore and 0.1-32MPa wide pressure, this valve covers refrigeration to high-pressure hydraulic systems. Threaded connection handles high pressure in small sizes, suitable for compact equipment requiring precise protection. Set pressure adjustable via top cap with locking for calibration.
4.Multiple Body Materials & Seal Options: Four body materials: 2Cr13 (13Cr stainless, general), 1Cr18Ni9Ti (SS304, corrosive), 1Cr18Ni12Mo2Ti (SS316, chloride/acid), and HPb59-1/H62 brass (refrigeration). Seals: PTFE soft (zero leakage, ≤200°C) or cobalt carbide (Stellite/D507) hard (high temp/wear). Spring: 50CrVA chrome-vanadium alloy for stable elasticity and long fatigue life, with PTFE-coated or nickel-plated options for corrosive service.
5.Halogen Leak Testing & Refrigeration Ready: For refrigerant service, every valve undergoes halogen leak testing ≤0.1 oz/year - very tight. Also air tested no leakage 2 min. Refrigerant models handle -40~120°C with brass or stainless body and PTFE seal compatible with Freon and ammonia, ideal for compressors.
6.Reliable Testing & Standards Compliance: Every valve undergoes rigorous testing: body hydrostatic 1.5× rated, air seal no leakage 2 min, set pressure calibration 3+ tests, halogen leak ≤0.1 oz/year for refrigerant. Compliant with GB/T 12243, API 520, ISO 4126, PED, ISO 9001. Material traceability EN 10204 3.1 available. Backed by 18-month warranty and >10-year life, spares (seals, springs, discs) available.
Working Principle
The Spring Micro-opening External Thread Safety Valve operates through a spring direct-load mechanism: when pressure remains below preset limit, 50CrVA spring holds disc against seat (PTFE or cobalt carbide), zero-leakage shutoff; when pressure exceeds set, medium pressure overcomes spring force, lifting disc microscopically (1/40 to 1/20 throat) creating small annular gap, releasing excess liquid gradually (no pop) until pressure drops to reseating range, spring recloses disc. This micro-opening relief suits incompressible liquids - small discharge reduces pressure without water hammer. Operates automatically without power, side test pin for verification. Set pressure adjustable via top cap.
Application Scenarios
Hydraulic & Air Compressor Systems: Hydraulic systems up to 32MPa, air compressor tanks, and compact manifolds requiring precise micro-opening relief, with external thread fitting directly on equipment.
Refrigeration & Air Conditioning: Refrigerant pipelines (Freon R22/R134a/R410A, ammonia), compressor discharge, condensers, and evaporators with brass or stainless body, PTFE seal, halogen-tested ≤0.1 oz/year, -40~120°C for reliable protection in refrigeration cycles.
Petrochemical & Chemical Processing: Petrochemical pipelines and small vessels handling oil, gas, ammonia, LPG, and corrosive chemicals, with SS304/SS316 body, PTFE or carbide seal, micro-opening relief for liquid and gas protection in compact equipment.
Small & Mobile Pressure Vessels: Small pressure tanks, mobile vessels (truck-mounted, portable), and narrow-space installations where compact external thread saves space, low vibration sensitivity suits mobile applications, DN10-50 typical with wrench installation.
Laboratory & Small-Scale Equipment: Small reaction kettles, experimental vessels, and lab equipment with DN10-25 bore, precise set pressure, stainless body for corrosive media, external thread for easy installation.
Quality Assurance
Every Spring Micro-opening External Thread Safety Valve undergoes rigorous quality control from raw material to finished product. All body materials (2Cr13, SS304, SS316, brass) certified with EN 10204 3.1 certificates and verified by PMI testing. Critical components precision-machined with tight tolerances. Each valve hydrostatically shell-tested at 1.5× rated pressure, air-seal tested no leakage 2 minutes, set pressure calibrated with 3+ tests. Refrigerant models undergo halogen leak testing ≤0.1 oz/year. The 50CrVA spring stress-relieved and load-tested for stable elasticity. Our facility operates under ISO 9001, full traceability and 18-month warranty on every unit.
FAQ
Q1: What is a spring micro-opening external thread safety valve, and how does it differ from full-lift valves?
A: A spring micro-opening external thread safety valve (A21 series) is a spring-loaded low-lift overpressure valve with external thread, for small-bore liquid systems. Its disc lifts only 1/40 to 1/20 of throat, gradual relief (no pop) for incompressible liquids. Unlike full-lift valves (25-30% throat, pop, large gas/steam capacity), micro-opening releases small volume for liquids where small discharge reduces pressure. External thread makes it compact for narrow spaces.
Q2: What pressure, temperature, size, and connection options are available?
A: Pressure: 0.1-32MPa (refrigeration to hydraulic). Temperature: ≤200°C; KA21Y LPG ≤100°C; refrigerant -40~120°C. Size: DN10-80, larger customizable. Connection: external thread - metric M (M27×1.5, M33×1.5) or G/BSP (G1/2", G3/4", G1"), NPT optional. Angle body inlet bottom, outlet side 90°. Body: 2Cr13/SS304/SS316/brass. Seal: PTFE or cobalt carbide. Spring: 50CrVA.
Q3: What body materials and seals should I choose for my medium?
A: Choose body by medium: 2Cr13 for general water/oil/air; 1Cr18Ni9Ti (SS304) for general corrosive; 1Cr18Ni12Mo2Ti (SS316) for chloride/acid; HPb59-1/H62 brass for refrigeration. Seals: PTFE soft (zero leakage, ≤200°C, corrosive/refrigerant) or cobalt carbide (Stellite/D507) hard (high temp/wear, steam/oil). Spring: 50CrVA standard, PTFE-coated or nickel-plated for corrosive.
Q4: What testing and certifications does this valve have?
A: Every valve undergoes 100% factory testing: body hydrostatic 1.5× rated, air seal no leakage 2 min, set pressure calibration 3+ tests (≤±3%), halogen leak ≤0.1 oz/year for refrigerant models. Standards: GB/T 12243, API 520, ISO 4126, PED. Certifications: ISO 9001, CE, EN 10204 3.1 material cert, optional TÜV/SGS/BV third-party. 18-month warranty, design life >10 years.
Q5: How do I install, set, and maintain this valve?
A: Installation: wrap PTFE tape on thread, screw into port with wrench, ensure flow direction (inlet bottom, outlet side). Set: adjust via top cap with locking, verify with gauge. Maintenance: inspect annually, clean seat/disc, replace seal/spring as needed, recalibrate, use side test pin. Spares available.
Hot Tags: Micro-opening External Thread Safety Valve | Compact Relief, China Micro-opening External Thread Safety Valve | Compact Relief manufacturers, suppliers, factory, pressure relief valve in transformer, pilot relief valve, steam relief valve, pressure release valve in transformer, water heater pressure valve leaking, safety release valve
| Item | Specification |
|---|---|
| Product Name | Spring Micro-opening External Thread Safety Valve (A21H/A21W/A21Y/KA21Y) |
| Design & Manufacturing Standard | GB/T 12243, API 520, ISO 4126, PED 2014/68/EU |
| Nominal Pressure | 0.1MPa-32MPa (Customizable Set Pressure) |
| Nominal Diameter | DN10-DN80 (3/8"-3", Larger Customizable) |
| Operating Temperature | ≤200°C Standard; KA21Y ≤100°C (LPG); Refrigerant -40~120°C |
| Body Material | 2Cr13, 1Cr18Ni9Ti (SS304), 1Cr18Ni12Mo2Ti (SS316), HPb59-1/H62 Brass |
| Trim Material | 50CrVA Chrome-Vanadium Spring, 2Cr13/Stainless Disc |
| Sealing Material | PTFE Soft Seal, Cobalt-Based Carbide (Stellite/D507) Hard Seal |
| Connection Type | External Thread (Metric M: M27×1.5/M33×1.5/M39×1.5; G/BSP: G1/2"-G1"; NPT Optional) |
| Operation Mode | Automatic Spring Direct-Load, Micro-Opening (Low-Lift), Manual Test Pin |
| Flow Channel | Angle Body (Inlet Bottom, Outlet Side 90°), Micro-Opening Annular Gap |
| Bonnet Type | Closed Bonnet, Top-Adjusting Cap with Locking, Side Test Pin |
| Test Standard | Shell Hydrostatic 1.5×PN, Air Seal No Leak 2min, Set Pressure 3+ Tests, Halogen Leak ≤0.1 oz/yr (Refrigerant) |
| Optional Certifications | ISO 9001, CE, PED, EN 10204 3.1, TÜV/SGS/BV Third-Party, 18-Month Warranty |







