Fully Enclosed Spring Safety Valve | Zero Leak Relief

Fully Enclosed Spring Safety Valve | Zero Leak Relief
Details:
Welcome to our product page for the Spring-loaded Fully Enclosed Safety Valve, a premium overpressure protection valve with fully enclosed bonnet/cap for zero external leakage, all discharged medium routed through outlet pipe. Designed for flammable, explosive, toxic, corrosive media (LPG, H2S, HCl, chlorine, ammonia, acids). Full-lift with recoil disc, large capacity, fast response. AISI 6150 chrome-vanadium spring (2×24h treatment), set 0.06-10MPa ≤±3%. DN15-400, PN1.6-10MPa, WCB ≤300°C / SS ≤200°C. Split mirror-polished Stellite seat, easy maintenance. Flange/thread. GB/T 12243, ASME, API 526, PED, CE/ISO. 18-month warranty, OEM/ODM.
Send Inquiry
Add To Inquiry
Download
Description
Technical Parameters

Product Introduction

 

Our Spring-loaded Fully Enclosed Safety Valve is a spring-loaded full-lift safety valve with fully enclosed bonnet and cap, designed for critical systems handling flammable, explosive, toxic, or corrosive media. It automatically relieves pressure when exceeding set value, while fully enclosed design ensures all discharged medium guided through outlet pipe with zero leakage to environment. Adopts spring direct-load with full-lift structure and recoil disc, disc opens instantly fully (lift ≥1/4 throat) providing large capacity and rapid reduction; closes and reseals when pressure drops. Spring made of AISI 6150 chrome-vanadium (2×24h constant-temp treatment) or AISI 301 stainless, set deviation ≤±3%. Split seat mirror-polished Stellite hardfaced, easy reprocess. Body WCB/SS304/316/316L, disc 20Cr13/Stellite/PTFE, flange/thread. Widely used in petrochemical, chemical, power, food, metallurgy, LPG, water treatment.

 

Product Features

 

1.Fully Enclosed Zero External Leakage: Fully enclosed bonnet/cap no vent holes, all gaskets sealed, stem packed inside. ALL medium exits only through side outlet to discharge pipe - zero atmospheric leakage. Mandatory for flammable, explosive, toxic, corrosive media. Ensures operator safety and environmental compliance.

2.Full-Lift + Recoil Disc Large Capacity: Full-lift ≥1/4 throat, recoil disc creates stable pop at 3-10% overpressure, ~3-4× capacity of micro-opening. Large flow area for rapid relief of gas/steam/vapor/LPG. Angle body directs discharge to safe header/flare. Sized per API 520.

3.Premium AISI 6150 Spring 2×24h Treatment: AISI 6150 chrome-vanadium (50CrVA) spring, twice 24h constant-temp treatment (stress relief + stabilization, shot peened) - stable set ≤±3%, no drift, long fatigue life. AISI 301 stainless for corrosive. Accurate set pressure years without recalibration.

4.Split Seat + Mirror Polish + Stellite: Split removable seat - easy replacement/reprocessing, material flexibility. Mirror-polished Ra≤0.4μm tight seal. Stellite hardfaced HRC40+ wear/erosion/corrosion. Disc 20Cr13/Stellite/PTFE. Long-term tight shutoff (≥0.2MPa 3min no leak), easy maintenance.

5.Multiple Materials & Temp/Pressure: Body WCB (≤300°C), SS304/316/316L (≤200°C corrosive/sanitary). Disc 20Cr13/Stellite/PTFE. PN1.6-10MPa, set 0.06-10MPa. Flange (JB/T 79/ASME B16.5) or threaded (DN15-50). Optimized for hazardous media.

6.Reliable Testing & Certifications: 100% factory tested - seal ≥0.2MPa 3min no leak, shell hydro 1.5×, set 3+ tests ≤±3%, full-lift pop, NDT. GB/T 12243, ASME, API 526, PED. CE/ISO/ASME, SGS/BV/TUV optional. 18-month warranty, OEM/ODM.

 

Working Principle

 

The Spring-loaded Fully Enclosed Safety Valve operates through spring direct-load with fully enclosed angle body (inlet bottom flange, outlet side flange 90°): when pressure below preset, AISI 6150 spring holds Stellite/20Cr13/PTFE-sealed disc onto split mirror-polished seat, tight seal, fully enclosed no atmospheric leak; when pressure exceeds set, medium pressure overcomes spring force lifting disc, recoil disc (huddling chamber) amplifies lift to FULL open (≥1/4 throat) at 3-10% overpressure, medium discharges through side outlet pipe ONLY (bonnet/cap sealed, no vent holes), large capacity, pressure drops; when pressure drops to reseat, spring recloses disc and reseals zero leakage. Fully automatic, no external power. Set pressure 0.06-10MPa adjustable via top nut inside sealed cap, ≤±3% accuracy. All discharge through outlet to safe header/flare - zero external leakage mandatory for hazardous media. WCB ≤300°C / SS ≤200°C, PN1.6-10MPa.

 

Application Scenarios

 

Petrochemical & Oil: Refineries, pipelines, LPG tanks, reactors, flare systems for flammable/toxic media. Zero-leak mandatory, discharge to flare.

Chemical & Pharmaceutical: Chemical plants (acid, chlorine, HCl, ammonia), pharma reactors. Prevents toxic vapor release. SS316/316L, PTFE seal, discharge to scrubber.

LPG Storage & Gas Distribution: LPG tanks, transport tankers, filling stations, gas pipelines. Prevents flammable vapor release. Discharge to safe vent/flare.

Energy & Power: Thermal boilers, steam headers, deaerators, nuclear auxiliary. Directs steam to safe vent header. WCB ≤300°C, Stellite seal.

Food, Metallurgy, Water & General: Food sterilization (316L sanitary), metallurgy pipelines, water treatment RO/dosing, pressure vessels. Controlled environments, multiple materials.

 

Quality Assurance

 

Every Spring-loaded Fully Enclosed Safety Valve undergoes rigorous quality control from raw material to finished product. Body WCB/SS304(CF8)/SS316(CF8M)/316L, cast, UT/RT/MT/PT 100% NDT per pressure class, certified MTR EN 10204-3.1, PMI (XRF) for stainless, heat traceable. Split Seat - separate removable seat ring, mirror-polished Ra≤0.4μm, Stellite hardfaced or 20Cr13 or PTFE, precision lapped, 100% leak test. Disc - 20Cr13/Stellite/PTFE matched to seat. Spring - AISI 6150 chrome-vanadium (2×24h constant-temp treatment, shot peened) or AISI 301 stainless, calibrated, load tested. Bonnet/Cap - fully enclosed, bolted/threaded, spiral-wound graphite or metal gaskets, NO vent holes, sealed cap. Assembly - set pressure calibration 3+ tests ≤±3%, full-lift stroke, no binding. Pressure - 100% shell hydrostatic 1.5×MAP, sealing test ≥0.2MPa air 3min NO LEAKAGE (seat + bonnet/cap), full-lift/overpressure test, zero external leak verified. Standards - GB/T 12243-2021, ASME B16.34, ASME B16.5, API 526, PED, ISO 4126. Certifications - CE, ISO, ASME (U/V optional), SGS/BV/TUV optional. Warranty 18 months, design life >10 years.

 

FAQ

 

Q1: What is a spring-loaded fully enclosed safety valve, and why fully enclosed?

A: Spring-loaded full-lift overpressure valve with fully enclosed bonnet/cap, no vent holes. All medium exits only through side outlet - zero atmospheric leakage. Mandatory for flammable, explosive, toxic, corrosive media.

 

Q2: Full-lift vs micro-opening - which do I need?

A: Full-lift (≥1/4 throat) with recoil disc pop, ~3-4× capacity, for gas/steam/vapor/LPG. Micro-opening (small gap) for liquids (water/oil). Choose full-lift for compressible, micro-opening for liquid.

 

Q3: What makes the AISI 6150 spring special?

A: AISI 6150 chrome-vanadium (50CrVA) with twice 24h treatment - stable set ≤±3%, no drift, long fatigue life. AISI 301 stainless for corrosive media.

 

Q4: What is a split seat, and benefits of Stellite?

A: Split removable seat - easy replacement/reprocessing. Mirror-polished Ra≤0.4μm tight seal. Stellite HRC40+ wear/corrosion. Disc 20Cr13/Stellite/PTFE. Tight shutoff, easy maintenance.

 

Q5: What pressure, temp, size, materials, warranty?

A: PN1.6-10MPa, set 0.06-10MPa ≤±3%. WCB ≤300°C / SS ≤200°C. DN15-400, flange/thread. Body WCB/304/316/316L, disc 20Cr13/Stellite/PTFE. GB/T 12243, ASME, API 526, CE/ISO. 18-month warranty.

 

Hot Tags: Fully Enclosed Spring Safety Valve | Zero Leak Relief, China Fully Enclosed Spring Safety Valve | Zero Leak Relief manufacturers, suppliers, factory, hydraulic relief valve, pressure relief valve, hot water pressure relief valve, air relief valve for water line, pressure release valve, pressure valve leaking

Item Specification
Product Name Spring-loaded Fully Enclosed Safety Valve (Full-Lift)
Design & Manufacturing Standard GB/T 12243-2021, ASME B16.34, ASME B16.5, API 526, PED 2014/68/EU, ISO 4126
Nominal Pressure PN1.6-PN10MPa (16-100bar), Set Pressure 0.06-10MPa (Customizable), Deviation ≤±3%
Nominal Diameter DN15-DN400 (1/2"-16"), Larger Customizable
Operating Temperature WCB Body: ≤300°C; Stainless Steel (304/316/316L) Body: ≤200°C
Body Material WCB Carbon Steel, SS304 (CF8), SS316 (CF8M), 316L Low-Carbon Stainless
Trim Material AISI 6150 Chrome-Vanadium Spring (2×24h Constant-Temp Treatment, Shot Peened), AISI 301 Stainless (Corrosive), 20Cr13/Stellite/PTFE Disc
Sealing Material Split (Removable) Seat, Mirror-Polished Ra≤0.4μm; Stellite (Co-based) Hardfaced / 20Cr13 / PTFE
Connection Type Flange (JB/T 79, ASME B16.5, RF), Thread (DN15-50, NPT/BSP)
Operation Mode Automatic (Spring Direct-Load Full-Open), Fully Enclosed Bonnet/Cap (Zero External Leakage, No Vent Holes)
Flow Channel Angle Body, Full-Lift (Lift ≥1/4 Throat Diameter), Recoil Disc / Huddling Chamber Pop Action
Bonnet Type Fully Enclosed Bonnet + Sealed Valve Cap, NO Vent Holes, Top Adjusting Nut Inside Cap
Test Standard Sealing Test ≥0.2MPa Air 3min No Leakage; Hydrostatic Strength 1.5×MAP; Set Pressure 3+ Tests ≤±3%; Full-Lift Pop Test; NDT
Optional Certifications CE, ISO 9001, ASME (U/V Optional), SGS/BV/TUV Third-Party, EN 10204-3.1 MTC, 18-Month Warranty
Send Inquiry