Product Introduction
Our Parallel Flow Hole Gate Valve adopts a dual-parallel-disc structure with polished flat sealing surfaces mated to floating seats, serving as reliable on-off isolation for industrial pipelines. Its unique integrated flow hole (vent hole) in the lower disc distinguishes it from standard parallel valves, providing automatic cavity pressure equalization, seat erosion protection and unobstructed pipeline pig passage in long-distance oil and gas trunk lines. Available in vented and non-vented configurations, with full-bore design minimizing pressure drop and maximizing flow efficiency, it adapts to diverse pipelines from power plant steam systems to high-pressure hydrocarbon transmission.
Product Features
1.Superior Bidirectional Sealing Performance: Dual-parallel-disc design with floating seats and pre-loading springs ensures reliable bidirectional sealing from both directions. Highly polished sealing surfaces in reinforced graphite, PTFE or Stellite hardfaced alloy prevent media leakage even under high pressure, fully compliant with API 598 sealing standards.
2.Integrated Flow Hole Design: The precision-machined flow hole in the lower disc of vented models provides automatic cavity-pipeline pressure equalization during opening, reducing operating torque and protecting seat surfaces from high-velocity erosion. When fully open, the flow hole aligns with the pipeline bore for smooth flow and unobstructed pig passage.
3.Ultra-Low Flow Resistance & Full-Bore Design: True full-bore design with gate flow passage equal to pipeline ID minimizes pressure drop and ensures high flow efficiency. Theoretical flow resistance coefficient of 0.1–0.3 is comparable to a straight pipe section, ideal for large-diameter high-flow pipelines.
4.Durable & Corrosion-Resistant Construction: Valve body and gate discs in carbon steel (WCB), stainless steel (304/316) or alloy steel deliver corrosion, wear and elevated temperature resistance. Aluminum bronze yoke sleeve reduces friction and operating torque; all pressure-bearing components undergo rigorous NDT inspection.
5.Flexible Drive & Automation Options: Supports manual handwheel, electric multi-turn and pneumatic actuation, all complying with API 6D. Explosion-proof electric and pneumatic actuators (ATEX/IECEx) available for hazardous areas, enabling remote control, SCADA integration and emergency shutdown.
6.Easy Maintenance & Long Service Life: Welded seat rings and replaceable gate discs simplify routine maintenance and reduce downtime. Many configurations support in-line maintenance without full pipeline disassembly. Service life exceeds 100,000 operating cycles per API 600 for decades of dependable service.
Working Principle
The Parallel Flow Hole Gate Valve operates on dual-parallel-disc sliding principle. Rotating the actuator lifts or lowers two parallel discs between floating seats: fully open, discs retract above the bore and the lower disc flow hole aligns with the pipeline ID for pig passage; closing, springs and medium pressure push seats against both disc faces, forming bidirectional seals. The flow hole equalizes cavity pressure during opening, reducing torque and erosion. Unlike wedge valves, discs slide parallel without wedging force for low torque and uniform wear.
Application Scenarios
Oil & Gas Transmission Pipelines: Long-distance oil and gas trunk lines, piggable pipelines, offshore platforms, and refineries. Vented models are ideal for pipelines requiring pressure equalization and routine pigging operations for inspection and cleaning.
Power Generation Plants: Piping systems, pump inlet and outlet isolation, and steam pipelines in thermal and combined-cycle power plants. Non-vented models are well-suited for sealed systems without pigging requirements, providing reliable high-pressure isolation.
Chemical & Petrochemical Industry: Chemical processing pipelines, corrosive media transportation, and sulfur-containing (sour) service, with stainless steel and alloy steel body options plus sulfur-resistant material configurations per NACE MR0175.
Water Treatment & Municipal: Municipal water supply mains, sewage treatment plants, and industrial water circulation pipelines, where low flow resistance and reliable bidirectional sealing reduce pumping energy costs and prevent backflow.
Metallurgy & General Industry: Steel mills, district heating networks, urban construction, environmental protection systems, and any pipeline requiring dependable on-off isolation with minimal pressure drop and extended maintenance intervals.
Quality Assurance
Every Parallel Flow Hole Gate Valve is manufactured and tested per API 6D, GB/T 12234, ANSI B16.34, and ISO 9001:2015. Raw materials are MTR-verified by heat number with chemical and mechanical testing. Each valve undergoes dimensional inspection, shell testing at 1.5× and seat testing at 1.1× per API 598/GB/T 13927, with low-pressure air testing for gas service. NDT includes magnetic particle and penetrant examination on castings and welds as required. Units ship with serialized MTR, test certificates, and 18-month warranty, with BV/SGS/TUV inspection on request.
FAQ
Q1: What is the flow hole (vent hole) and what purpose does it serve?
A: It is a precision-machined aperture in the lower gate disc of vented models. It equalizes trapped cavity pressure with the pipeline before the main disc unseats during opening, reducing opening torque, preventing seat erosion from high-velocity initial flow, and aligning with the pipeline bore at full open for unobstructed pig passage.
Q2: What is the difference between vented and non-vented configurations?
A: Vented models with flow hole are for long-distance oil/gas transmission pipelines requiring pigging and cavity pressure equalization. Non-vented models with solid discs provide complete bidirectional isolation for power plant steam systems, process piping and sealed applications where pigging is not required.
Q3: How does the dual-parallel-disc design differ from a conventional wedge gate valve?
A: Unlike a single tapered wedge disc forced into seats creating high friction, dual parallel flat discs slide between floating seats without wedging force. This delivers 30–50% lower operating torque, more uniform seat wear, bidirectional sealing and reduced risk of sticking or thermal binding at high temperatures.
Q4: Can it be used for throttling or flow regulation?
A: No. Like all gate valves, it is designed for fully open or fully closed on-off isolation only. Partially open operation causes high-velocity media to erode polished sealing surfaces and flow hole edges, leading to premature leakage and irreversible damage. Use a control/globe/butterfly valve for throttling.
Q5: What maintenance is required and what is the expected service life?
A: Routine maintenance includes stem packing lubrication, external visual inspection and periodic cycling to prevent seat seizure. Welded seat rings and replaceable gate discs simplify overhaul; many configurations support in-line maintenance. Service life exceeds 100,000 open-close cycles per API 600 under proper conditions, translating to 20–30 years of service in most applications.
Hot Tags: Parallel Flow Hole Gate Valve | API 6D Vented Dual-disc Gate Valve, China Parallel Flow Hole Gate Valve | API 6D Vented Dual-disc Gate Valve manufacturers, suppliers, factory, 300 gate valve, resilient seated valve, pressure seal gate valves, high pressure gate valve, gate valve 1 1 2 inch, gate valve oil and gas
| Item | Specification |
|---|---|
| Product Name | Parallel Flow Hole Gate Valve |
| Valve Type | Parallel slide gate valve; dual-parallel-disc; vented/non-vented |
| Nominal Diameter | DN50 – DN800 (NPS 2" – 32") |
| Nominal Pressure | PN1.6 – PN4.0 MPa (ANSI Class 150 – Class 900) |
| Operating Temperature | -20℃ ~ 120℃; high-temperature customizable |
| Body Material | Carbon Steel (WCB), Stainless Steel (304/316), Alloy Steel |
| Gate Disc Material | Stainless Steel; Stellite hardfaced alloy (optional); elastic material |
| Seal Material | Reinforced Graphite, PTFE, Stellite Hardfaced Alloy |
| Connection Type | Flanged (ANSI/DIN/GB), Threaded, Butt Welded |
| Operation Mode | Manual handwheel; Electric actuator; Pneumatic (explosion-proof optional) |
| Flow Resistance Coefficient | 0.1 – 0.3 (theoretical, full-bore) |
| Design Standard | API 6D, GB/T 12234, ANSI B16.34, DIN 3202 |
| Test Standard | API 598, GB/T 13927, ISO 5208 |
| Service Life | ≥100,000 operating cycles (API 600 compliant) |
| Warranty | 18 months from shipment |







