Electric High‑Temperature Ball Valve | Electric Actuated High‑Temp Flanged Ball Valve

Electric High‑Temperature Ball Valve | Electric Actuated High‑Temp Flanged Ball Valve
Details:
Welcome to our product page for the Electric High‑Temperature Ball Valve, an automatic flow‑control valve built for high‑temperature fluid pipelines. It pairs angular‑stroke electric actuators with high‑temperature‑resistant valve construction, supporting switch‑type and 4‑20mA modulating remote control. DN15‑DN200, PN1.6‑6.4MPa, operating temperature up to 800℃. Widely used in petrochemical, power, metallurgy, environmental‑protection and pharmaceutical industries, compliant with GB12237‑89, API 608 and API 6D standards.
Send Inquiry
Add To Inquiry
Download
Description
Technical Parameters

Product Introduction

 

Our Electric High‑Temperature Ball Valve is an integrated assembly of an angular‑stroke electric actuator and high‑temperature ball‑valve body. It adopts upgraded high‑temperature‑resistant seat materials, delivering a service life 3‑5 times longer than ordinary PTFE‑sealed ball valves. Compact and lightweight, it supports both remote centralized automatic control and local manual override. It solves common pain‑points of traditional manual valves in high‑temperature conditions such as difficult operation, poor sealing and short service life, and serves as core automated pipeline equipment for steam, thermal‑oil and corrosive high‑temperature media.

 

Product Features

 

1.Excellent High‑Temperature Resistance: Body materials include WCB, CF8(304), CF8M(316), CF3M(316L). Selections of PTFE, PPL and hard‑alloy metal seats enable stable operation within 200‑800℃ without thermal‑deformation or seal failure.

2.Reliable Sealing Performance: Flexible graphite and metal spiral‑wound gaskets serve as packing. Adopting O‑shaped spherical ball core design, leakage is below 0.01 % of rated KV‑value and meets GB/T4213‑92 standard, preventing high‑temperature‑medium leakage and material loss.

3.Intelligent Electric Control: Compatible with PSQ, HQ, UNIC, 361RS, HR‑series angular‑stroke actuators. Supports two‑position on‑off with position indicator light, plus 4‑20 mA analog modulating signal for remote monitoring and precise flow regulation with ±1 % basic error.

4.Durable Construction: Nitrided or high‑grade stainless‑steel ball and stem deliver outstanding wear‑, corrosion‑ and heat‑resistance. Optimized internal geometry lowers component friction for smooth switching and extended service life.

5.Good Adaptability & Easy Maintenance: Dimension standards align with domestic and international specifications. Two‑piece / three‑piece cast body allows disassembly, inspection and part replacement without removing the whole valve off‑line, cutting maintenance labour and downtime. Customisable for specific media and working‑conditions.

6.Comprehensive Safety Protection: Actuator fitted with thermal‑overload protection plus electrical‑mechanical double‑limit protection. IP65 enclosure rating (IP66 optional); explosion‑proof rating ExdII BT4 (ExdII BT6 optional), safe for high‑temp, high‑pressure and flammable‑explosive working‑zones.

 

Working Principle

 

The electric actuator receives switch or 4‑20 mA analog control signals and drives the stem and O‑shaped ball core to rotate 90°. When the ball bore aligns with pipeline, the valve opens for fluid passage; when rotated perpendicular to pipeline, flow is fully shut‑off. High‑temperature‑adapted seats and graphite packing maintain tight sealing under thermal cycling. Manual‑override function is available for on‑site commissioning and power‑failure emergency operation.

 

Application Scenarios

 

Petrochemical Industry: High‑temp crude‑oil transfer, cracking‑gas cut‑off, reactor fluid control, high‑temperature acid‑alkali medium transportation.

Power Industry: High‑temperature steam on‑off, boiler feed‑water modulation, thermal‑power‑plant high‑temperature pipeline control.

Metallurgical Industry: Molten‑metal diversion, high‑temperature flue‑gas cut‑off, smelting‑process hot‑fluid regulation.

Pharmaceutical & Food Industry: High‑temp medicinal‑liquid purification, sterilisation‑steam on‑off, hot cleaning‑fluid control meeting hygienic requirements.

Environmental‑Protection Industry: High‑temperature flue‑gas diversion, high‑temp waste‑water on‑off, high‑temperature agent delivery.

Other Fields: Aerospace engine‑medium control, carbon‑capture flue‑gas diversion and CO₂ transport; also rubber‑, papermaking‑plants as replacement for globe‑, plunger‑ and quick‑blow‑down valves.

 

Quality Assurance

 

Every Electric High‑Temperature Ball Valve is manufactured and inspected per GB12237‑89, API 608, API 6D and JB/T 9092 standards. Raw‑material MTR‑3.1 certificates and PMI‑verification are available. Each unit undergoes 1.5×rated hydrostatic shell test, 1.1×rated seat‑leakage test, full‑stroke functional test and actuator‑performance validation prior to shipment. 12‑18 months warranty from shipment; actuators carry 12‑month warranty.st, two/three-piece, high-temp rated 200-800℃. Ball - "O"-type spherical, nitrided or stainless, precision ground. Stem - nitrided or stainless. Seat - PTFE/PPL/hard alloy metal; filler V-type PTFE/flexible graphite/metal wound gasket, leakage <0.01% KV GB/T4213-92. Actuator - PSQ/HQ/UNIC/361RS/HR angular-stroke, 4-20mA or two-position, error ±1%, torque 50-2000N·m, time 15/30/60s, overheating protection, electrical/mechanical double limit, IP65/IP66, ExdII BT4/BT6. Pressure - 100% shell 1.5×, seat 1.1× API598, zero leakage. Operation - 90° smooth. Connections - flange ANSI. Standards GB12237/API608/API6D/BS5351/DIN3357, test JB/T9092/API598/GB/T13927. Warranty 12-18 months.

 

FAQ

 

Q1: What is an electric high‑temperature ball valve and where is it used?

A: It is a 90‑degree rotary automated valve combining electric actuator and high‑temperature‑resistant ball‑valve body, specially for high‑temperature media such as steam, thermal oil and hot corrosive fluids. It is widely applied in petrochemical, power, metallurgy, environmental‑protection and pharmaceutical high‑temperature pipelines for remote on‑off and flow‑modulating duties.

 

Q2: What sealing material options are there for high‑temperature working‑conditions?

A: Seat options include PTFE, PPL and hard‑alloy metal seal; packing adopts V‑type PTFE or flexible graphite. PPL / metal‑alloy seats together with graphite packing are recommended for service above 200 ℃ to resist thermal‑aging and maintain tight sealing.

 

Q3: What control modes does the electric actuator support?

A: Two‑position switch‑type for simple open/close; modulating‑type accepts 4‑20 mA analog signal for precise flow adjustment (basic error ±1 %). Manual handwheel override is available for power‑failure emergency‑operation. Explosion‑proof variants are optional for hazardous‑area deployment.

 

Q4: What are the advantages of two‑piece / three‑piece cast‑body design?

A: It enables on‑site disassembly, inspection and replacement of internal wearing parts without removing the entire valve from the pipeline, greatly shortening maintenance time and lowering operating‑cost.

 

Q5: What are the key points of installation and operation?

A: Install per flange‑standard torque specification; ensure independent pipe support. Avoid long‑term throttling under small opening for particle‑containing media. Periodically execute full‑stroke exercise; isolate and depressurize pipeline before disassembly and maintenance.

 

Hot Tags: Electric High‑Temperature Ball Valve | Electric Actuated High‑Temp Flanged Ball Valve, China Electric High‑Temperature Ball Valve | Electric Actuated High‑Temp Flanged Ball Valve manufacturers, suppliers, factory, 50mm pvc ball valve, ball valve open, 2 threaded ball valve, ball valve 1 1 2 inch, pipeline ball valve, ball valve pvc 2

Item Specification
Product Name Electric High‑Temperature Ball Valve
Valve Type O‑ball two‑piece cast ball valve, electric actuated
Nominal Diameter DN15 – DN200 (custom sizes available)
Nominal Pressure PN1.6, PN2.5, PN4.0, PN6.4 MPa; ANSI 150, 300LB
Operating Temperature Up to 800 ℃ (depends on seat / body material)
Body Material WCB, 304(CF8), 316(CF8M), 316L(CF3M)
Seal Material Seat: PTFE, PPL, hard‑alloy metal; Packing: V‑PTFE, flexible graphite
Drive Mode Electric angular‑stroke actuator; on‑off / 4‑20 mA modulating; manual override
Connection Type Flanged (threaded optional)
Actuator Power Supply AC220V / AC380V / DC24V / AC110V (customizable)
Design Standard GB12237‑89, API 608, API 6D, BS5351, DIN3357
Warranty 12‑18 months (valve body); 12 months (actuator)
Send Inquiry