Product Introduction
Product Features
1.Four-Port X/L-Port Multi-Path Control: Four ports in one body with X-shaped or L-shaped internal ball channels; 90° rotation enables flow switching, diversion, mixing and reversal between ports. Replaces 4+ separate 2-way valves and complex piping/elbows/tees, reducing installation space, cost, leak points and operational sequencing errors.
2.Top-Mounted Trunnion Fixed Ball: Top-supported trunnion fixed ball with bottom bearing maintains axial position under pressure, delivering lower operating torque and bidirectional sealing at all four ports. One-piece trunnion ball-stem design eliminates stem-pin shear failure common in two-piece designs, improving reliability for high-torque and frequent-cycling service.
3.Pressure-Enhanced Zero-Leakage Sealing: Spring-loaded seats with pressure-energized sealing effect deliver bidirectional zero leakage at all ports, with sealing force increasing with medium pressure. Seat options include PTFE, reinforced plastic, Viton and hard metal, adapting to different temperature and medium requirements.
4.Full-Port Arc Flow Low Resistance: Full-port flow path with smooth arc transitions minimizes turbulence, pressure drop and erosion, reducing pumping energy consumption. No dead cavities prevent medium accumulation and facilitate pipeline cleaning, suitable for both liquid and gas service.
5.Multi-Actuation & Intelligent Control: Available with manual lever, pneumatic actuator (IP67, ATEX optional) or electric actuator with manual backup. Automated models include control boxes with position indicators, fault alarms and PLC communication (4-20mA, RS485/Modbus) for remote central control and monitoring.
6.Wide Material & Global Compliance: Body materials include WCB cast steel, 304/316/304L/316L stainless steel. Complies with GB/T 12237, API 6D, ASME B16.34, DIN 3357 and BS 5351 standards, with ISO 9001 and CE certifications. Wide size, pressure and temperature ranges adapt to diverse industrial applications.
Working Principle
Application Scenarios
Power Industry: Used for power plant unit cooler forward/reverse cooling water switching, boiler feedwater control and heat exchanger reversal. One X-port valve replaces 4 separate valves, simplifies multi-valve sequencing, reduces operational errors and delivers 15% energy savings over gate valves due to full-port low resistance.
Petrochemical Industry: Applied in medium circulation systems, chemical injection skids and multi-path fluid distribution in refineries. WCB/316 body and corrosion-resistant seals suit hazardous and corrosive service; bidirectional sealing ensures reliable flow direction change; DCS/PLC integration supports automated remote control.
Water Treatment Industry: Used for reverse osmosis systems, filter switching and dual-tank filling/emptying. 316L stainless body with PTFE/Viton seals suits clean water and wastewater service; full-port design prevents accumulation and enables easy cleaning; multi-path mixing/distribution in one valve simplifies system design.
Pharmaceutical & Food Industry: Applied for sanitary-grade fluid mixing, material transfer and CIP cleaning systems. 316L stainless body with food-grade seals meets GMP and hygienic requirements; full-port no-dead-corner design enables efficient clean-in-place cleaning; multi-path control in one valve reduces contamination risks.
Laboratories & Test Stands: Used for high-pressure fluid control, experimental pipeline switching and sample line selection in labs and test facilities. Compact multi-path design replaces complex test piping; fast switching and wide pressure/temperature range suit diverse experimental setups.
HVAC, Hydraulic & General Industrial: Applied for HVAC refrigerant/water switching, hydraulic circuit direction control and marine ballast/cooling systems. Four-port design simplifies system architecture, reduces cost, space and leak points; global standards and customizable configurations adapt to specific industrial routing needs.
Quality Assurance
FAQ
Q1: X-port vs L-port four-way ball valve – which do I need?
A: X-port valves have two crossing channels for simultaneous dual flow, flow reversal and mixing applications, ideal for heat exchanger and cooler forward/reverse service. L-port valves have one 90° channel for diversion and selection from a common source to multiple destinations, ideal for multi-tank filling, filter switching and sample line selection. Choose based on whether you need dual flow/reversal or single-source multi-destination routing.
Q2: How does a four-way valve replace multiple valves, and what are the savings?
A: A single four-way ball valve replaces 4+ separate 2-way valves plus complex piping, elbows and tees. It reduces total valve count by 75%, actuator count by 75% for automated systems, leak points by 60–70% and installation footprint by 50–75%, typically delivering 30–60% lower total installed cost while eliminating operational sequencing errors.
Q3: Why use top-mounted trunnion fixed ball for four-way valves?
A: Trunnion fixed ball maintains axial position under pressure, delivering lower operating torque, bidirectional sealing at all four ports and consistent alignment, critical for multi-path direction-switching applications. One-piece ball-stem design eliminates stem-pin shear failure. Top-entry design allows ball/stem removal from the top without disconnecting pipelines, simplifying maintenance.
Q4: What actuation options are available, and do I need position feedback?
A: Manual lever with position plate is available for occasional on-site operation. Pneumatic actuators deliver fast 1–5s operation with intrinsic safety for hazardous areas. Electric actuators offer precise positioning with control boxes and PLC communication. Position feedback is essential for four-way valves to prevent process errors from incorrect flow patterns; automated models include limit switches or position transmitters as standard.
Q5: What maintenance, standards and warranty apply?
A: Top-mounted trunnion design enables top-entry online maintenance without disconnecting four pipelines. Routine maintenance includes visual inspection, periodic full-stroke exercise and seal replacement as needed. It complies with GB/T 12237, API 6D, ASME B16.34 standards with ISO 9001 and CE certifications. Warranty is 18 months from shipment for valve body, 12 months for actuators.
Hot Tags: Four-Way Ball Valve | X/L-port Multi-path Flow Control Ball Valve, China Four-Way Ball Valve | X/L-port Multi-path Flow Control Ball Valve manufacturers, suppliers, factory, 1 5 ball valve, cpvc valve, trunnion ball valve, hand valves, four way water valve, vee ball valve
| Item | Specification |
|---|---|
| Product Name | Four-Way Ball Valve |
| Valve Type | Quarter-turn multi-port ball valve, X/L-port, top-mounted trunnion |
| Nominal Diameter | DN15 – DN600 (1/2" – 24") |
| Nominal Pressure | PN1.0 – PN160 (Class 150 – Class 900) |
| Operating Temperature | -20℃ ~ 400℃ (material/seat-dependent) |
| Body Material | WCB Cast Steel, 304/316/304L/316L Stainless Steel |
| Seal Material | PTFE, Reinforced Plastic, Viton, Hard Metal |
| Port Pattern | X-port (dual flow/reversal) / L-port (diversion/selection) |
| Drive Mode | Manual lever, Pneumatic, Electric (with manual backup) |
| Connection Type | Flanged, Threaded, Butt Weld, Socket Weld |
| Design Standard | GB/T 12237, API 6D, ASME B16.34, DIN 3357 |
| Warranty | 18 months from shipment (valve body); 12 months (actuator) |







