Product Introduction
Product Features
1.Zero-friction Eccentric Design & Long Service Life: The offset eccentric axis cams the semi-ball away from the seat in the first 5–10° of opening, achieving zero friction, rubbing and wear during the entire 90° rotation. HRC 65–72 Stellite/tungsten carbide hardened sealing surfaces deliver exceptional abrasion resistance, and the eccentric wedge self-energizes on closing for tighter sealing at higher pressure, dramatically extending service life in abrasive slurry service.
2.360° Self-Cleaning & Anti-Clog/Anti-Scale: When opening, medium flows 360° around the exposed spherical sealing surface, eliminating localized high-velocity scouring and automatically flushing sediments, scale and debris off the seat. No dead cavities in the flow path prevent medium accumulation and solidification, solving deposition, scaling and blockage issues in pulp, coal ash, mineral slurry and viscous media pipelines.
3.Full-Bore Low Resistance & Energy Saving: Full-port design retracts the semi-ball completely out of the flow path when fully open, providing a straight unobstructed channel with flow resistance close to a straight pipe section, minimizing pressure loss and pumping energy consumption. Full-bore design also supports pipeline pigging and handles viscous/slurry media without clogging.
4.Electric Intelligent Control + Dry Stem + Top-Entry Maintenance: Electric actuators support 4-20mA analog modulating, DC 24V on-off and RS485 digital communication, seamlessly integrating with DCS/PLC/SCADA systems, with explosion-proof and intelligent options available. Dry stem design isolates the stem from medium contact for maintenance-free operation. Optional top-entry structure enables inline seat/ball/stem replacement without removing the valve from the pipeline, with manual handwheel override for emergency operation.
5.Fire-Safe API 607/6FA + Anti-Static: Complies with API 607 quarter-turn fire test and API 6FA ball valve fire test; metal-to-metal backup seat engages if the soft seat is destroyed by fire to prevent major media release. Anti-static steel balls and springs ensure electrical continuity between all components to discharge static electricity and prevent sparks in flammable media, with resistance ≤10Ω per ISO 10497.
6.Wide Range & Global Standard Compliance: Size range DN40–DN1600, pressure range PN10–PN100, with soft seat temperature -60~180℃ and metal seat -196~450℃ covering cryogenic to high-temperature steam service. Multiple body materials, connection types and global standards are available, with 18-month warranty and OEM/ODM support.
Working Principle
Application Scenarios
Petroleum & Chemical Industry: Used for crude oil, heavy oil, chemical reagents, corrosive media, refinery slurry and catalyst lines and tank farm isolation. Zero-friction design handles abrasive and corrosive media; fire-safe and anti-static features meet hazardous area requirements; top-entry inline maintenance reduces turnaround downtime.
Power Generation Industry: Applied for power plant water supply/drainage, hydraulic slag removal, pulverized coal and coal ash pipeline control, steam/gas regulation and FGD slurry. 360° self-cleaning prevents coal ash/slag/scaling blockage; hardened surfaces resist fly ash erosion; metal seat option adapts to high-temperature steam.
Metallurgy & Mining Industry: Serves steel and aluminum smelting, pulp and mineral processing, ore slurry, tailings and flue gas slurry pipelines. Zero-friction opening eliminates abrasive wear from particle-laden media; self-cleaning prevents mineral scale buildup; full-bore design handles high-solid slurry without clogging.
Urban Infrastructure: Used for urban water supply/drainage, sewage treatment, heating & ventilation, natural gas/LPG transportation and municipal sludge. Full-bore low resistance suits large water mains; self-cleaning prevents sewage/sludge blockage; electric remote control adapts to unmanned pump stations; top-entry design suits buried pipelines.
Food, Pharma & Paper Industry: Applied in food processing, pharmaceutical, paper and textile industries with strict hygiene and sealing requirements. Stainless steel body meets hygienic and corrosion requirements; PTFE/PEEK seat provides chemical compatibility; zero leakage prevents contamination; full-bore design handles pulp and viscous media without clogging.
Quality Assurance
FAQ
Q1: What is the difference between this electric eccentric semi-ball valve and conventional electric ball valves or standard electric eccentric ball valves?
A: Compared with conventional ball valves that slide against the seat every cycle causing rapid wear in abrasive service, this semi-ball valve cams away from the seat at the start of opening for zero friction and wear, with wedge self-energizing sealing and 360° self-cleaning to prevent blockage; compared with standard eccentric ball valves, it features larger size range, higher pressure and temperature ratings, full-bore design, side/top-entry and trunnion mounting options, and dual API 607/6FA fire safety certification, making it more suitable for large-bore, high-pressure, cryogenic/high-temperature and inline-maintenance severe service scenarios.
Q2: Can this valve be used for flow regulation or only on-off service?
A: It can be used for both on-off shutoff and flow regulation; specify a modulating-type electric actuator for 4-20mA analog control with ±1% position accuracy, and the eccentric design keeps the semi-ball separated from the seat at partial openings to avoid seat erosion from throttling, or select an on-off-type actuator for pure shutoff service, both with manual handwheel override for emergency operation.
Q3: What is top-entry design, and when is it needed?
A: Top-entry design allows valve internals (stem, semi-ball, seat) to be accessed and replaced through the top bonnet without removing the valve body from the pipeline; it is recommended for DN300+ large-bore valves, critical continuous process pipelines, and buried or hard-to-access installations to significantly reduce downtime and maintenance cost, while side-entry design is more economical for smaller sizes and non-critical service.
Q4: How to select seat material for different applications?
A: PTFE soft seat delivers broad chemical resistance and Class VI zero leakage for -29~180℃ water, oil, gas and mild abrasive service; RPTFE reinforced PTFE offers better wear and pressure resistance; PPL/PEEK suit higher temperature up to ~280℃ for hot water and steam; metal seat with hardened surfaces is suitable for -196~450℃ cryogenic, high-temperature steam and highly abrasive slurry service; the valve includes an API 607/6FA fire-safe metal backup seat regardless of primary seat type.
Q5: What sizes, pressures, actuator options, standards and certifications are available?
A: Size range covers DN40–DN1600 with pressure ratings PN10–PN100; soft seat temperature range -60~180℃, metal seat -196~450℃; multiple body materials and flange/butt weld/thread/wafer connections are available; electric actuators include on-off, modulating, intelligent and explosion-proof types; it complies with API 608, BS 5351, API 6D, ISO 9001 standards, with fire-safe, anti-static, CE and optional ATEX/GOST certifications, backed by 18-month valve body warranty.
Hot Tags: Electric Eccentric Semi-ball Valve | Full-bore Zero-friction Electric Control Valve, China Electric Eccentric Semi-ball Valve | Full-bore Zero-friction Electric Control Valve manufacturers, suppliers, factory, worcester ball valve, concealed ball valve, 1 2 inch valve, lockable valve, 2 inch pvc ball valve, water hose ball valve
| Item | Specification |
|---|---|
| Product Name | Electric Eccentric Semi-ball Valve |
| Valve Type | Quarter-turn eccentric semi-ball valve, electric actuated |
| Nominal Diameter | DN40 – DN1600 |
| Nominal Pressure | PN10 – PN100 (Class 150 – Class 900) |
| Operating Temperature | Soft seat: -60 ~ 180℃; Metal seat: -196 ~ 450℃ |
| Body Material | Carbon Steel, Stainless Steel, Duplex Steel, Special Alloys |
| Seal Type | Soft seal (PTFE/RPTFE/PEEK); Metal seal (Stellite hardened); fire-safe backup |
| Drive Mode | Electric: on-off / modulating / intelligent / explosion-proof; manual override |
| Connection Type | Flange, Butt Weld, Thread, Wafer |
| Design Standard | API 608, BS 5351, API 6D, GB/T 12237 |
| Warranty | 18 months from shipment (valve body); 12 months (actuator) |







