Product Introduction
Product Features
1.Zero‑friction Opening‑Closing: Triple‑eccentric geometry (stem‑axis offset, hemisphere‑center offset, cone‑angle offset) makes hemispherical core fully separate from seat at initial opening stroke. No rubbing contact between sealing surfaces during full 90‑degree rotation, greatly reduces wear of core and seat, low operating torque for smooth, labor‑free operation.
2.Reliable Bidirectional Sealing Performance: Metal hard‑faced sealing pair with HRC65‑72 hardness. Eccentric wedge action generates increasing mechanical closing force; floating seat design automatically presses against hemisphere under back‑pressure. Higher pressure yields tighter seal to achieve zero‑leakage shut‑off, suitable for hazardous gas and corrosive fluid service.
3.Self‑cleaning Anti‑scaling Function: When hemisphere tilts away from seat, fluid flows 360° uniformly across spherical sealing surfaces to flush away sediments. Blade‑shaped crown edge scrapes scale and cuts solid impurities each cycle, preventing scaling, deposition and valve blockage for slurry and scaling‑prone media.
4.Long Service Life & Convenient Maintenance: Compensation margin reserved for sealing pair. Even with seat wear, dependable sealing can still be obtained via closing wedge action. Seat can be adjusted or replaced without scrapping whole valve body to cut downtime and maintenance expense. Integral cast body with large inner cavity avoids medium accumulation.
5.Low Pressure Loss & High Flow Efficiency: Full‑bore unobstructed flow‑passage when fully open, near‑zero water‑head loss and high Cv flow coefficient. Minimizes abrasion and improves pump‑system efficiency, saving energy for large‑capacity pipeline systems.
Working Principle
Application Scenarios
Oil & Gas Industry: Applied in petroleum refining and natural gas transmission pipelines, handles crude oil, natural gas and media with precipitated impurities, anti‑scaling and reliable shut‑off improves pipeline operational safety.
Chemical Industry: Used for transportation of acid, alkali, salt and catalyst slurry; zero‑friction and self‑cleaning properties resist scaling and solid‑particle interference for corrosive two‑phase chemical media.
Power Generation Industry: Suitable for thermal‑power, nuclear‑power and hydropower plants, controls ash‑slurry, circulating water and flue‑gas‑related media, resists fly‑ash scaling and particle abrasion.
Metallurgical & Mining Industry: Serves steel‑works, non‑ferrous smelting and mineral‑ore transportation pipelines, copes with ore slurry, tailings and dusty abrasive media, anti‑clog performance avoids frequent valve jamming.
Water Treatment Industry: Deployed in municipal water‑supply, drainage and industrial circulating‑water projects, handles sewage, sludge and water‑quality‑variable media.
Paper‑Pulp & Other Industries: For kaolin and wood‑particle pulp delivery; also applies to fertilizer, polysilicon, cement and glass production lines for scaling‑prone mixed‑flow process media.
Quality Assurance
FAQ
Q1: What is an eccentric semi‑ball valve and how does it differ from ordinary ball valves?
A: It is a triple‑eccentric hemispherical‑core quarter‑turn valve. Conventional floating‑trunnion ball valves keep ball rubbing against seat through rotation and wear quickly under particle‑containing scaling media. The eccentric semi‑ball valve cams hemisphere fully away from seat at opening for zero‑friction rotation, plus 360° flushing and blade‑edge scraping self‑cleaning to prevent scaling and blockage; wedge‑type self‑energizing bidirectional sealing delivers longer service life for slurry and scaling‑prone service.
Q2: How does self‑cleaning anti‑scaling mechanism work?
A: When hemisphere tilts away from seat on opening, pipeline fluid flows 360° uniformly over spherical sealing surface to wash loose sediments away. The blade‑shaped crown edge scrapes hard scale and cuts solid impurities during closing movement. Combined effect inhibits medium deposition and avoids seat sticking or valve blockage.
Q3: What are available sealing options, leakage class and temperature limits?
A: Soft‑seat (PTFE / RPTFE / PPL / PEEK):‑60℃~180℃, zero‑leakage Class VI. Metal hard‑seat (hard‑alloy overlay):‑196℃~450℃ for cryogenic and high‑temperature service, achieving ANSI Class‑V leakage grade. Select soft‑seat for clean‑to‑mild‑abrasive; metal hard‑seat for high‑temp / cryogenic / heavily abrasive slurry.
Q4: What sizes, pressures, body‑materials and drive modes are selectable?
A: Nominal size DN25‑DN2000, pressure PN1.0‑6.4MPa (Class150‑900LB). Body materials include WCB, ductile‑iron, 304/316 stainless steel, WC6/WC9 alloy‑steel and special alloys Hastelloy / Inconel / Monel. Actuation options: manual worm‑gear, pneumatic, electric and hydraulic. Connections: flange, wafer, butt‑weld.
Q5: What key points for installation and maintenance?
A: Can install in any orientation, horizontal stem position preferred. Avoid long‑time partial‑opening throttling for heavily‑abrasive slurry. Perform full‑open‑close cycling periodically to prevent scale accumulation. Seat can be adjusted/replaced without removing full valve from pipeline; isolate and depressurize pipeline before any disassembly work.
Hot Tags: Eccentric Semi‑ball Valve | Triple‑eccentric Self‑cleaning Anti‑scaling Industrial Valve, China Eccentric Semi‑ball Valve | Triple‑eccentric Self‑cleaning Anti‑scaling Industrial Valve manufacturers, suppliers, factory, 2 stainless steel ball valve, smart ball valve, float ball for water tank, 1 pvc ball valve, pvc water valve, press ball valve
| Item | Specification |
|---|---|
| Product Name | Eccentric Semi‑ball Valve (Eccentric Half‑ball Valve) |
| Valve Type | Triple‑eccentric hemispherical‑core quarter‑turn valve |
| Nominal Diameter | DN25 – DN2000 |
| Nominal Pressure | PN1.0‑6.4 MPa (Class150‑900LB) |
| Operating Temperature | Soft seat:‑60 ~ 180℃; Metal seat:‑196 ~ 450℃ |
| Body Material | WCB, Ductile Iron, 304/316 Stainless Steel, Alloy / Special Alloys |
| Seal Material | Soft‑seat: PTFE / RPTFE / PPL / PEEK; Hard‑seat: Hard‑alloy overlay HRC65‑72 |
| Drive Mode | Manual / Worm‑gear / Pneumatic / Electric / Hydraulic |
| Connection Type | Flange, Wafer, Butt‑weld |
| Design Standard | API 608, BS 5351, API 598 |
| Warranty | 12‑18 months from shipment |







