Product Introduction
Our Umbrella Gear Knife Gate Valve integrates a bevel gear (umbrella gear) transmission mechanism with a knife-edge gate plate, delivering labor-saving manual operation for medium-to-large diameter slurry pipelines. The bevel gear system converts horizontal handwheel rotation into vertical stem motion with torque multiplication, reducing operating effort by over 50% compared with direct handwheels, especially suitable for DN300+ large valves. The cavity-free structure eliminates dead zones where solids accumulate, while the sharp knife gate shears through fibrous and particulate media to prevent clogging. Available in hard seal and soft seal configurations with multiple body and gate material options, it supports both on-off isolation and flow throttling, providing reliable, low-maintenance flow control for abrasive slurry, pulp, ash and corrosive media across industries.
Product Features
1.Labor-Saving Bevel Gear Drive: Arc-tooth bevel gear transmission reduces operating effort by over 50%, ideal for DN300+ large-diameter valves. Features stable engagement, low noise, high wear resistance and 90° direction change, enabling ergonomic operation in tight spaces and pit locations.
2.High-Performance Sealing Options: Available in hard seal (Class D leakage per MSS SP 91) for high-temperature/abrasive service, and soft seal for zero-leakage performance. PTFE upper stem packing ensures reliable low-friction stem sealing. Soft seal models feature replaceable seat rings for in-service seal replacement without full valve removal.
3.Durable Corrosion-Resistant Construction: Valve body available in WCB carbon steel, stainless steel (CF8/CF8M) and cast iron. Gate plate made of 2Cr13, 304, 316 or 316L stainless steel for corrosion resistance, preventing pitting-induced leakage and extending service life.
4.Compact Cavity-Free Design: Cavity-free structure reduces volume by 30% and weight by 40% compared with traditional gate valves. Ultra-short face-to-face length saves installation space, reduces pipeline load stress and minimizes pipeline vibration, ideal for retrofits and space-limited installations.
5.Strong Medium Adaptability: Sharp knife gate shears through dense abrasive slurries, fibers and particles without clogging; scraping action cleans sealing surfaces on closing. Suitable for slag, coal ash, pulp, sewage and cement slurry media; supports both on-off and throttling regulation, especially suited for papermaking pipelines.
6.Easy Installation & Maintenance: Flange and wafer connection options for easy assembly and disassembly. Soft seal models enable in-line seat replacement without valve body removal. Simple structure with fewer moving parts reduces maintenance workload; cavity-free design eliminates internal solids buildup cleaning.
Working Principle
The Umbrella Gear Knife Gate Valve: handwheel → bevel gear → stem → knife gate → seat → cavity-free body. Handwheel turns bevel gears (arc-tooth, >50% labor-saving), 90° change, torque multiply, driving stem to raise/lower gate. Closing: knife gate descends, shearing slurry/debris, presses seat - hard Class D or soft zero leakage (rubber/PTFE); PTFE packing. Opening: gate rises, full-bore cavity-free flow, low resistance. Cavity-free: -30% vol, -40% wt; knife removes debris - anti-clog. Manual; optional electric/pneumatic/hydraulic. On-off + throttling. DN50–2000, 0.6–2.5MPa. Rubber≤80, PTFE≤180, hard≤425°C. Flange/wafer.
Application Scenarios
Mining, Metallurgy & Power Plants: Used for coal slurry, filter slag, mineral powder and tailings transport in mining, and ash/slag discharge in power plants. Umbrella gear labor-saving operation suits large-diameter slurry pipelines; knife gate prevents clogging in high-concentration slurry; hard seal option for high-temperature ash/slag.
Pulp & Paper Industry: Suitable for pulp stock and stock-water mixture regulation and throttling in papermaking. Knife gate cuts wood pulp fibers and prevents fiber wrapping; scraping action cleans pulp residue from seats; stainless steel gate resists corrosion in bleaching systems.
Chemical, Pharmaceutical & Food: Used for chemical slurries and corrosive media handling in chemical plants, and food-grade syrup, juice and malt slurry transport. PTFE seal resists acids and alkalis; food-grade stainless steel and seals meet FDA/3A hygiene requirements; soft zero-leak seal prevents hazardous chemical release.
Environmental Protection & Sewage Treatment: Applied for urban sewage, industrial wastewater and sludge discharge systems. Knife gate cuts through sludge flocs and fibrous debris; cavity-free design prevents sludge buildup and settling; umbrella gear enables operation in hard-to-reach pit locations.
Cement & Building Materials: Suitable for cement slurry, lime slurry shut-off and regulation. Knife gate cuts through cement particles and prevents clogging; cavity-free design prevents cement solids packing and seizing; ultra-short structure fits space-limited cement plant piping.
Quality Assurance
Every Umbrella Gear Knife Gate Valve is manufactured and tested per ISO 9001, CE, GB, DIN, API, ANSI, JB/T8691, GB/T13927. Raw materials: body MTR + tests, PMI SS; gate blade PT; castings RT/UT; dimensions checked. Assembly: alignment, smooth, seal, movable seat, bevel gear smooth, knife verified. Bevel gear: profile, contact, backlash, noise checked. Pressure: shell 1.5×PN, seat 1.1×PN (hard Class D, soft zero leakage). Cycle test 5 cycles. Flow: liquid ≤5m/s, gas ≤15m/s. Batch traceable. Ship with certs, reports, manual. 18mo warranty. Third-party on request.
FAQ
Q1: What is an umbrella gear knife gate valve, and why is it called "umbrella gear"?
A: It is a manually operated knife gate valve driven by a bevel gear transmission. It is named "umbrella gear" for the arc-shaped tooth profile on the cone-shaped bevel gear blank. Two bevel gears mesh at 90° to convert horizontal handwheel rotation into vertical stem motion, delivering speed reduction and torque multiplication for labor-saving operation.
Q2: How does the umbrella gear save labor, and how to choose between drive types?
A: Gear reduction multiplies output torque, reducing operating effort by over 50% compared with direct handwheels. Choose umbrella gear for DN300+ large valves, hard-to-reach locations, or manual throttling needs. Choose direct handwheel for small DN50–DN250 valves; choose electric/pneumatic/hydraulic for automated control or extremely large sizes.
Q3: What is the difference between hard seal and soft seal, and what is Class D leakage?
A: Soft seals (rubber/PTFE) provide zero leakage for moderate-temperature water, slurry and chemicals. Hard seals (stainless/hard alloy) provide Class D leakage per MSS SP 91: maximum 0.1×DN mm³/s for liquids, suitable for high-temperature/abrasive media where soft seals degrade.
Q4: How does the cavity-free design prevent clogging and reduce size/weight?
A: Cavity-free design eliminates the upper bonnet cavity dead zone where solids settle and jam the gate. Knife edge shearing + scraping action cuts fibers/particles and cleans sealing surfaces. Volume is reduced by 30% and weight by 40% vs. traditional gate valves, with shorter face-to-face length to save space and reduce pipeline stress.
Q5: What sizes, pressures, temperatures, materials and connections are available?
A: Sizes DN50–DN2000; pressure 0.6–2.5MPa (PN6–PN25). Temperature depends on seal: rubber ≤80℃, PTFE ≤180℃, hard seal ≤425℃. Body materials: WCB, stainless steel, cast iron; gate: 2Cr13/304/316/316L stainless. Connections: flange, wafer. Compliant with GB, DIN, API, ANSI standards.
Hot Tags: Umbrella Gear Knife Gate Valve | Bevel Gear Labor-saving Anti-clog Slurry Valve, China Umbrella Gear Knife Gate Valve | Bevel Gear Labor-saving Anti-clog Slurry Valve manufacturers, suppliers, factory, gate knife china company, automated gate valves, 12 inch knife gate valve, sanitary knife gate valve, China pneumatic knife gate valve, pratt knife gate valve
| Item | Specification |
|---|---|
| Product Name | Umbrella Gear Transmission Knife Gate Valve (Bevel Gear Knife Gate Valve) |
| Valve Type | Bevel-gear operated knife gate valve; cavity-free; on-off + throttling |
| Nominal Diameter | DN50 – DN2000 (NPS 2" – 80"); custom sizes available |
| Nominal Pressure | 0.6 – 2.5 MPa (PN6 – PN25); ANSI Class 150 |
| Operating Temperature | Rubber ≤80℃; PTFE ≤180℃; Hard seal ≤425℃ |
| Body Material | WCB Carbon Steel; Stainless Steel (CF8/CF8M); Cast Iron |
| Gate Material | 2Cr13, 304, 316, 316L Stainless Steel |
| Seal Material | Rubber (NBR/EPDM), PTFE; Stainless/hard alloy (hard seal) |
| Leakage Class | Hard seal: Class D (MSS SP 91); Soft seal: zero leakage |
| Drive Mode | Umbrella bevel gear (standard); optional electric/pneumatic/hydraulic/direct handwheel |
| Connection Type | Flanged (GB/DIN/API/ANSI/EN compatible); Wafer |
| Design Standard | GB, DIN, API, ANSI, JB/T 8691 |
| Test Standard | GB/T 13927; MSS SP 91 (hard seal) |
| Warranty | 18 months from shipment |







