Product Introduction
Our Electric Slurry Valve is an upgraded industrial slurry control valve integrating electric actuation and optimized slurry handling structure, replacing traditional gate, globe and butterfly valves in slurry service with smaller size, lower flow resistance and lighter weight. The full-through no-dead-angle streamlined channel prevents slurry deposition and clogging; the knife-shaped gate cuts through viscous slurry to ensure reliable sealing. The elastic U/O-ring sealing system delivers bidirectional zero-leakage shut-off, with adjustable outer seal and flange O-ring inlay design for simplified installation. Equipped with intelligent actuator supporting manual, automatic and remote control modes, it provides stable, low-maintenance flow control for abrasive, high-solid-content slurry across industries.
Product Features
1.Slurry-Specific Anti-Clog Design: Full-through, no-dead-angle streamlined channel avoids slurry deposition and residue buildup, reducing clogging and simplifying pipeline cleaning. Knife-shaped gate plate shears through viscous slurry and particle agglomerates, solving poor sealing caused by slurry precipitation. Straight-through flow path delivers low flow resistance and minimal pressure drop when fully open.
2.Superior Two-Way Sealing Performance: Elastic U-shaped or O-shaped composite sealing ring achieves reliable bidirectional bubble-tight shut-off. Outer gate seal is adjustable via screws and pressure plates to restore sealing performance without full disassembly. Flange face inlaid O-ring eliminates the need for separate flange gaskets, simplifying installation and reducing leak points.
3.High Automation & Precise Control: DZW multi-turn electric or electro-hydraulic actuator, AC380V powered, accepts 4-20mA/0-10V control signals for remote automatic control via DCS/PLC systems. Supports manual, automatic and remote control modes; built-in stroke control and torque protection prevent over-travel and overload damage.
4.Wear & Corrosion Resistant Construction: Valve body in gray cast iron or ductile iron; gate plate and stem in 2Cr13, 304, 316, 304L, 316L stainless steel; sealing rings in NBR, EPDM, PTFE. Wear-resistant folded cone at the inlet deflects particles from directly scouring the seal, significantly extending service life in abrasive slurry service.
5.Compact Structure & Easy Installation: Wafer-type compact structure with small volume and light weight, suitable for space-limited installations. Easy assembly and disassembly reduces maintenance cost and downtime. Flange O-ring inlay design eliminates separate gaskets and reduces potential leak points.
6.Energy-Saving & High Reliability: Electric actuator with good mechanical durability operates stably in harsh environments, reducing failure rate and maintenance cost. Intelligent control optimizes energy consumption; torque protection and stroke control prevent valve damage, extending service life and reducing total cost of ownership.
Working Principle
The Electric Slurry Valve: actuator → stem → knife gate → U/O-ring seat → full-through channel. DZW multi-turn (AC380V) or electro-hydraulic drives stem (4-20mA, DCS/PLC, stroke+torque). Closing: knife gate descends, cutting slurry/particles, presses elastic U/O-ring seat - two-way bubble-tight seal (NBR/EPDM/PTFE; outer seal adjustable; flange O-ring no gasket). Opening: gate rises, full-through no-dead-angle flow, low resistance, no sediment. Inlet wear cone deflects particles from seal. Manual/auto/remote; handwheel emergency. On-off + flow regulation. DN50–1000, PN1.0–1.6MPa/150LB. NBR≤80°C, EPDM≤120°C, body≤200°C. Wafer.
Application Scenarios
Mining & Metallurgical Industry: Used for flotation slurry, tailings transport, coal slurry and ore powder control in mining, and blast furnace ash/slag fluid control in metallurgy. Full-through channel prevents slurry deposition; knife gate cuts through ore particles and slag; inlet wear cone protects seal from particle scouring.
Paper, Food & Pharmaceutical Industry: Applied for pulp transport in papermaking and malt/fruit/grain slurry transport in food/pharmaceutical production. Knife gate cuts pulp fibers without clogging; food-grade stainless steel and seals meet hygienic requirements; 4-20mA control enables precise flow regulation in batching and filling lines.
Chemical Industry: Suitable for chemical feed liquid with solid particles, catalyst slurry and oil sand tailings transport. Elastic two-way seal ensures reliable shut-off for corrosive media; PTFE seat resists acids/alkalis; adjustable outer seal allows in-service adjustment without full disassembly.
Environmental Protection & Power Industry: Used for sludge discharge in sedimentation tanks, industrial wastewater and domestic sewage transport, and ash/slurry handling in power plant FGD systems. Full-through channel prevents sludge buildup; EPDM seat suits sewage/sludge; inlet wear cone protects against gypsum/limestone particle erosion.
Building Materials & Other Industries: Used for cement slurry, coating slurry and ceramic raw material slurry. Inlet wear cone is especially valuable for highly abrasive cement slurry; compact wafer structure fits space-limited production lines; electric actuator enables automatic operation in dusty environments.
Quality Assurance
Every Electric Slurry Valve is manufactured and tested per ISO 9001, CE, JB/T9092, MSS SP91, GB9113, ASME B16.5, EN 1092. Raw materials: body MTR + tests; gate/stem blade PT, PMI SS; castings RT/UT; dimensions checked. Assembly: alignment, smooth, U/O-ring seal, outer adj, flange O-ring, knife verified. Actuator: DZW motor, reducer, stroke/torque, 4-20mA, handwheel, local/remote. Pressure: shell 1.5×PN, seat 1.1×PN (soft zero-leak, hard MSS SP91). Cycle test 5 cycles. Wear cone (if ordered) tested. Batch traceable. Ship with certs, reports, manual. 18mo warranty. Third-party on request.
FAQ
Q1: What is an electric slurry valve, and why use it instead of traditional gate/globe/butterfly valves for slurry?
A: It is an electrically actuated knife gate valve specifically designed for high-viscosity, particle-containing, sedimentary slurry media. It outperforms traditional valves with smaller wafer size, lower flow resistance, anti-clog knife gate, no-dead-angle channel and automated control, solving clogging, poor sealing and rapid wear problems common with conventional valves in slurry service.
Q2: How does the U/O-ring sealing system work, and what is the flange O-ring inlay advantage?
A: Elastic U/O-shaped seat ring provides bidirectional bubble-tight sealing when the gate closes. Outer gate seal is adjustable via screws to restore sealing without full disassembly. Flange face inlaid O-ring eliminates separate gaskets, reducing leak points and simplifying installation with no gasket alignment needed.
Q3: How do the no-dead-angle channel and inlet wear cone prevent clogging and extend service life?
A: Full-through no-dead-angle channel eliminates cavity dead zones where solids settle and jam the gate. Knife-shaped gate shears through viscous slurry and particles. Inlet folded cone deflects high-velocity particle-laden slurry away from directly scouring the sealing surface, dramatically extending seal life in abrasive service.
Q4: What actuator and control options are available?
A: Standard DZW multi-turn electric actuator; optional electro-hydraulic actuator for large sizes/high thrust. Control options: on-off switch type, and 4-20mA/0-10V modulating type with position feedback. Integrates with DCS/PLC for remote automatic control; manual handwheel override for power outages. Built-in stroke and torque protection.
Q5: What materials and temperature/pressure ranges are available?
A: Body: gray cast iron, ductile iron. Gate/stem: 2Cr13, 304, 316, 304L, 316L stainless steel. Seals: NBR (≤80℃), EPDM (≤120℃), PTFE (≤180℃); hard seal option per MSS SP91. Nominal pressure PN1.0–1.6MPa; working differential pressure decreases with larger valve sizes.
Hot Tags: Electric Slurry Valve | Knife Gate Anti-Clog Slurry Control Valve, China Electric Slurry Valve | Knife Gate Anti-Clog Slurry Control Valve manufacturers, suppliers, factory, pneumatic knife gate valve, Cheap bonneted knife gate valve, slurry knife gate valve, Suppliers electric slide gate valve, Wholesale v notch knife gate valve, Manufacturers flanged knife gate valve
| Item | Specification |
|---|---|
| Product Name | Electric Slurry Valve (Knife Gate Slurry Valve) |
| Valve Type | Electric/electro-hydraulic actuated knife gate slurry valve; full-through no-dead-angle channel; two-way sealing |
| Nominal Diameter | DN50 – DN1000 (2" – 40"); custom sizes available |
| Nominal Pressure | PN1.0 – PN1.6 MPa (10 – 16 bar); ANSI Class 150, JIS 10K |
| Operating Temperature | NBR ≤80℃; EPDM ≤120℃; PTFE ≤180℃; body ≤200℃; hard seal option for higher |
| Body Material | Gray cast iron; Ductile iron (GGG40) |
| Gate/Stem Material | 2Cr13, 304, 316, 304L, 316L stainless steel; hard-coated option |
| Seal Material | NBR, EPDM, PTFE; elastic U/O-ring seat; adjustable outer seal; flange O-ring inlay |
| Actuation Type | DZW multi-turn electric (standard); electro-hydraulic (optional); handwheel manual override |
| Control Mode | On-off switch type; 4-20mA/0-10V modulating type; DCS/PLC compatible; manual/auto/remote |
| Connection Type | Wafer type; compatible with GB, JB/T, ASME, EN flange standards |
| Design Standard | JB/T 9092, MSS SP91, ISO 9001, CE |
| Special Features | Inlet wear cone; adjustable outer seal; flange O-ring inlay; anti-clog full-through channel |
| Warranty | 18 months from shipment |







