Chain Wheel-driven Knife Gate Valve | Labor-saving Anti-clog Slurry Valve

Chain Wheel-driven Knife Gate Valve | Labor-saving Anti-clog Slurry Valve
Details:
Welcome to our product page for the Chain Wheel-driven Knife Gate Valve, a manually operated knife gate valve with chain wheel transmission for on-off control of slurry, powder, fiber and corrosive media. Features labor-saving chain drive for overhead/inaccessible valve locations, sharp stainless steel knife gate for anti-clog cutting, and PTFE mud scraper to protect stem packing. Available in DN50–DN1200 with 0.6–2.5MPa pressure ratings and -38~200℃ temperature range. Soft seal (EPDM/PTFE) for zero leakage or hard seal for Class D leakage. Wafer compact design with replaceable seal rings; optional bevel/electric/pneumatic actuation upgrades. Compliant with ISO, CE, API 598, MSS SP 81 and ASME B16.34 standards. Widely used in wastewater, pulp & paper, chemical, food, mining and power industries. 18-month warranty.
Send Inquiry
Add To Inquiry
Download
Description
Technical Parameters

Product Introduction

 

Our Chain Wheel Knife Gate Valve integrates a chain wheel transmission system with a sharpened knife gate, delivering reliable on-off isolation for solid-laden, fibrous and viscous industrial media. The chain wheel drive enables effortless manual operation for valves installed at high positions, raised platforms or in pits where direct handwheels are unreachable, with optional gear reduction for large-diameter valves. The sharp knife gate shears through impurities to prevent clogging and ensure tight shut-off; the PTFE mud scraper protects stem packing from abrasive wear. Full-circular channel design minimizes media accumulation; optional flushing ports prevent sediment buildup. Available in multiple body/seal materials and connection types, with upgradeable actuation options, it provides durable, low-maintenance flow control for harsh slurry and powder applications.

 

Product Features

 

1.Effortless Chain Wheel Operation: Chain wheel and chain transmission provides smooth, labor-saving operation for overhead or inaccessible valve locations. Optional gear reduction controllers further reduce effort for DN300+ large valves. Rugged cast iron chain wheel ensures durability for long-term heavy-duty industrial use.

2.Superior Sealing Performance: Sharpened austenitic stainless steel knife gate cuts through fibrous/granular media for tight shut-off. Soft seal (EPDM/PTFE) achieves zero leakage; hard seal meets Class D leakage standards. PTFE mud scraper at gate upper end prevents dust and abrasives from entering the packing box, extending packing service life.

3.Anti-Clogging & Wear-Resistant Design: Full-circular channel eliminates dead corners where solids pack and jam the gate. Optional flushing ports around the body allow air/steam/water flushing to prevent sediment buildup. Corrosion-resistant body materials (WCB, CF8, CF8M) withstand harsh chemical and wastewater environments.

4.Compact & Easy to Maintain: Wafer-type clamp-on connection with ultra-short body length saves material and installation space. Lightweight design for easy installation; wearable seal rings are easily replaceable without full valve disassembly, reducing downtime and maintenance costs.

5.Versatile & Customizable: Wide size range DN50–DN1200 with pressure grades 0.6–2.5MPa. Optional electric/pneumatic actuators for automation upgrade; multiple flange standards (ANSI, GB, DIN, JIS) and material combinations to match specific media and temperature requirements.

6.Wide Standards Compliance & Applications: Compliant with ISO, CE, API 598, MSS SP 81 and ASME B16.34 standards. Widely used in wastewater treatment, pulp & paper, chemical, food & beverage, mining and power plant applications, especially for valves in hard-to-reach locations.

 

Working Principle

 

The Chain Wheel Knife Gate Valve: hand chain → chain wheel → stem → knife gate → seat → full-circular body. Pull hand chain, cast iron wheel (gear opt.) rotates stem, raising/lowering sharp SS gate. Closing: gate descends, cuts fibers/particles, PTFE scraper wipes, presses seat - soft zero or hard Class D. Opening: gate rises, full-circular flow; flushing ports opt. clear sediment. PTFE scraper protects packing. Manual for overhead valves. On-off only. Wafer/lug/flange. DN50–1200, 0.6–2.5MPa. Bevel/electric/pneumatic opt.

 

Application Scenarios

 

Wastewater Treatment & Sludge Handling: Ideal for sewage, sludge and industrial wastewater control. Full-circular channel prevents sludge buildup; sharp gate cuts sludge flocs and fibrous debris; chain wheel operation enables use in pits and raised platforms; PTFE scraper protects packing from grit.

Pulp & Paper + Food & Beverage: Used for pulp, paper stock and fibrous media in papermaking; and food-grade media processing. Stainless steel and PTFE materials meet food safety standards; sharp gate cuts wood pulp fibers; full-circular channel allows easy cleaning between batches.

Chemical & Petrochemical Industry: Suitable for corrosive media, chemical slurries and solvent transfer. Corrosion-resistant stainless body options; soft zero-leak seal prevents hazardous chemical leakage; flushing ports allow cleaning between batches; chain wheel manual control for areas without automation.

Mining & Bulk Material Handling: Controls mineral slurries, coal powder and bulk materials. Full-circular channel and flushing ports prevent sediment packing; sharp gate cuts coal particles and ore; PTFE scraper protects packing from abrasive dust; chain wheel operation suits elevated/remote mining locations.

Power Plants & Biogas Plants: Used for FGD flue gas desulfurization, ash handling and biogas control. Provides reliable long-term operation with minimal maintenance; CF8M body with PTFE for chloride-rich scrubber liquor; optional actuator upgrade integrates with DCS/SCADA for remote monitoring.

 

Quality Assurance

 

Every Chain Wheel Knife Gate Valve is manufactured and tested per ISO 9001, CE, API 598, MSS SP 81, ASME B16.34, ANSI B16.5, DIN, JIS. Raw materials: body MTR + tests, PMI SS; gate blade PT; castings RT/UT; dimensions checked. Assembly: alignment, smooth chain, seal, PTFE scraper, flushing ports, knife verified. Chain wheel: cast iron, chain, gear (if ordered), wear checked. Pressure: shell 1.5×PN, seat 1.1×PN (soft zero, hard Class D). Cycle test 5 cycles. Batch traceable. Ship with certs, reports, manual. 18mo warranty. Third-party on request.

 

FAQ

 

Q1: What is a chain wheel-driven knife gate valve, and why use chain wheel operation?

A: It is a manually operated knife gate valve using a sprocket + hand chain transmission to operate the gate. Use it for valves installed overhead, on raised platforms, in pits or hard-to-reach locations where direct handwheels are unreachable. It provides mechanical advantage to reduce operating effort, with rugged cast iron construction for heavy-duty use. Optional gear reduction for large valves; upgradeable to electric/pneumatic actuation later.

 

Q2: How do the PTFE mud scraper and flushing ports prevent clogging and packing damage?

A: The PTFE scraper ring at the gate upper end wipes dust, gravel and slurry solids off the gate/stem as it moves, preventing abrasives from entering and damaging the packing box. Optional flushing ports around the body inject air/steam/water to wash out accumulated sediment in the body cavity, preventing solids from packing and jamming the gate.

 

Q3: What is the difference between soft seal and hard seal?

A: Soft seal (EPDM/PTFE) achieves zero leakage (Class A), for non-abrasive media at moderate temperatures (EPDM ≤120℃, PTFE ≤180℃). Hard seal (stainless/hard alloy) meets Class D leakage (0.1×DN mm³/s liquid), for abrasive/high-temperature media up to 200℃+ where minor leakage is acceptable.

 

Q4: What sizes, pressures, temperatures, materials and connections are available?

A: Sizes DN50–DN1200; pressures 0.6/1.0/1.6/2.5MPa / ANSI Class 150; temperature -38~200℃ (seal dependent). Body materials: WCB, CF8/CF8M stainless steel; gate: 304/316 stainless. Connections: wafer (standard), lug, flanged. Multiple flange standards available.

 

Q5: Can I convert to electric/pneumatic/bevel gear actuation later?

A: Yes, the valve body is designed for multi-drive compatibility. The standard chain wheel can be replaced with electric, pneumatic or bevel gear actuators as automation needs change, protecting your investment without replacing the entire valve.

 

Hot Tags: Chain Wheel-driven Knife Gate Valve | Labor-saving Anti-clog Slurry Valve, China Chain Wheel-driven Knife Gate Valve | Labor-saving Anti-clog Slurry Valve manufacturers, suppliers, factory, China pneumatic knife valve, pvc slide gate valve, Manufacturers 4 knife gate valve, 2 knife gate valve, Cheap knife valves pneumatic, Factorydelta knife gate

Item Specification
Product Name Chain Wheel-driven Knife Gate Valve
Valve Type Chain wheel manual knife gate valve; on-off service; full-circular channel; PTFE mud scraper
Nominal Diameter DN50 – DN1200 (NPS 2" – 48"); larger on request
Nominal Pressure 0.6 – 2.5 MPa; ANSI Class 150
Operating Temperature -38℃ ~ 200℃ (seal & body dependent)
Body Material WCB Carbon Steel; CF8/CF8M Stainless Steel
Gate Material 304/316 Stainless Steel; sharpened knife edge
Seal Material EPDM, PTFE (soft seal, zero leakage); Stainless/hard alloy (hard seal, Class D)
Operation Mode Chain wheel manual (standard); optional bevel gear, electric, pneumatic actuator
Connection Type Wafer (clamp-on, standard); Lug, flanged (optional)
Design Standard ISO 9001, CE, API 598, MSS SP 81, ASME B16.34
Special Features PTFE mud scraper; optional flushing ports; cast iron chain wheel; ultra-short body per MSS SP 81
Warranty 18 months from shipment
Send Inquiry