Selection of Butterfly Valve Materials
The choice of the main material for a butterfly valve requires comprehensive consideration of the medium's characteristics, operating temperature, and fluid flow conditions (such as the presence of particles, two-phase flow, etc.). Typically, users specify the requirements for the valve body material, especially for valves used in special or harsh operating conditions. In general, the valve body material is consistent with or slightly superior to the pipeline material.
For steel valves, the applicable temperature range can be referred to in the ANSI B16.34 standard. Carbon steel, as a versatile and economical material, can withstand temperatures up to 425°C. Additionally, cast iron and nodular cast iron are widely used in low-pressure valves. For seawater-resistant valves, the selection should be based on a comprehensive consideration of the operating conditions and importance.
Specifically, the following methods can be adopted:
- Use titanium alloy, which has excellent corrosion resistance and lightness.
- Choose duplex stainless steel, which has good strength and corrosion resistance.
- Use lined rubber or polytetrafluoroethylene (PTFE) to enhance the valve's corrosion resistance.
- Apply epoxy or ceramic coatings to provide an additional protective layer.
- Select low-nickel cast iron or low-alloy cast iron, which perform stably under specific operating conditions.
In practical applications, a combination of the above materials is sometimes used to meet more stringent operating requirements. For example, on ships, titanium alloy is an ideal choice due to its lightweight requirement, while in ordinary power plants and chemical plants, lined or low-alloy nodular cast iron with coatings are more suitable options.
Heat exchanger area calculation is a key technology in the chemical industry. At the same time, we also need to understand fundamental knowledge such as chemical safety distance diagrams, types and codes of rupture discs, the application of safety valve exhaust reaction force in open discharge systems, and the selection of gaskets. In pipeline engineering, buried glass-reinforced plastic (GRP) pipeline construction techniques, jacketed piping heating system design, pipeline pressure loss calculation, determination of pipeline support positions, filter technical parameters, and resistance calculation are all essential aspects. In addition, corrosion data and material selection, shell-and-tube heat exchanger models, and design regulations for steam tracing in chemical pipelines also require special attention.
In valve selection, we need to understand the types and structural forms of globe valves, common valve materials, pressure pipeline classification, and the selection of pipe flanges. At the same time, calculations of steam consumption and condensate discharge, heat exchanger piping, pump protection lines, and the layout of nonmetallic pipelines are also indispensable. Finally, we also need to master advanced techniques such as material thermal expansion coefficients, the working principle of tuning fork level switches, simple calculations for pipeline thermal compensation, safety valve calculation regulations, and methods for calculating gas velocity and Mach number. By mastering this knowledge, we can better perform heat exchanger area calculations and other pipeline engineering design and construction work.
Key Points for Pipeline Grading and Material Selection
In the chemical industry, pipeline flow velocity, operating flow rate, and standard flow rate are critical parameters that directly impact the safety and performance of the pipeline. Adhering to standards such as the Design Code for Fire Protection in Petrochemical Enterprises, ASME B31.3, and GB/T 20801 is essential to ensure the safety and quality of pipeline engineering. Additionally, valve material standards and overviews of pressure pipeline engineering standards are indispensable references.
In specific design and construction processes, we need to have a deep understanding and mastery of aspects such as the setting and calculation of restriction orifices, the selection and installation of flame arresters, and the calculation and setting of rupture discs. At the same time, we should be familiar with commonly used standards and specifications for pressure pipelines, the selection of level transmitters, and the types and uses of diaphragms, membranes, and capsule pressure gauges.
Furthermore, the material selection for ammonia water and liquid ammonia pipelines, nitrogen sealing technology, the calculation of steam trap drainage, and special requirements for Class A workshops and explosion hazardous areas are all aspects that cannot be ignored. In terms of materials, we need to understand the performance and characteristics of various pipeline materials to make reasonable selections based on actual needs.
Additionally, we need to grasp the preheating before welding and post-weld heat treatment of pipelines, the connection forms and related standards for branch pipes, and the Technical Safety Specifications for Special Equipment (TSG) and special equipment licensing. In specific design and construction, we also need to pay attention to the determination of equipment design pressure and temperature, the execution of strength, tightness, and leak tests, and the setting and selection of pipeline supports.
Overall, by deeply understanding and mastering these key technologies and specifications, we can better carry out the design and construction of pipeline engineering, ensuring the safety and quality of the project. Standards such as HG 20615 and HG 20623 for pipe flanges, the selection of valves for oxygen pipelines, engineering unit conversions, common abbreviations in petrochemical enterprise piping engineering, the evaluation of material corrosion resistance, the consideration of gas compression factors, the selection of steel pipe wall thickness series, and the selection of HG/T 20592 flange types are all indispensable points in chemical pipeline design and construction. At the same time, attention should also be paid to the regulations on pipeline spacing, the application of BIM pipeline integration technology, the control of fire protection spacing in engineering design, the accurate calculation of control valve KV values, the appropriate selection of GC1 pipeline materials, and the precise calculation of pump head and NPSHA. Furthermore, understanding the performance characteristics of Q345 material, the clear classification of explosion-proof levels, consulting the Compilation of Chemical Design Standards 2022, and interpreting the annotations on PDMS single-line diagrams are also key factors in ensuring the safety and quality of pipeline engineering.
