On-Off Tool

On-Off Tool
Details:
Welcome to our product page for the On-Off Tool, a professional downhole disconnect device designed to optimize well operation efficiency, reduce maintenance costs, and enhance operational safety in the oil and gas industry. Whether you are engaged in well production, remedial work, fracturing, or injection operations, our On-Off Tool provides a reliable solution for connecting and disconnecting sucker rod strings or tubing strings without disrupting the entire well system, helping you save rig time and protect valuable equipment.
Send Inquiry
Add To Inquiry
Download
Description
Technical Parameters
Product Introduction

 

The On-Off Tool is a compact, high-performance downhole tool that enables operators to connect or disconnect the sucker rod string or tubing string at any designated position in the well, based on the tool's installation location. It is directly attached to the rod string or tubing string and can be easily disconnected by rotating the rod string and lifting, while reconnection is achieved by setting down weight in the bottom latch section and rotating the rod string in the opposite direction. With its robust design and versatile functionality, this tool is widely used in various well conditions, including crooked holes, sandy wells, and wells with severe paraffin conditions, as well as with "bottled up" pumps and fiberglass tubing.

 

Product Features

 

1.Cost-Saving Operation : Virtually eliminates stripping jobs, which often lead to higher costs due to increased rig time and damaged equipment. By allowing rod string repair or replacement without unseating the pump, it significantly reduces workover costs and improves operational efficiency.

2.Oversized Pump Compatibility : Enables the use of oversized tubing pumps and larger plungers to displace more fluid, without the need to replace the entire tubing string. This helps enhance well productivity while minimizing equipment investment.

3.Enhanced Safety & Reservoir Protection : Allows operators to "fish" broken rods without unseating the pump or dumping the fluid "head" on the producing formation, which could cause reservoir damage. It can also be used as a safety joint to further improve operational safety.

4.Adaptability to Harsh Well Conditions : Suitable for use in crooked holes, sandy wells (where pump assembly removal is difficult), and wells with severe paraffin conditions. It allows scraper operation without unseating the pump, reducing pump damage and rig time.

5.Durable & Reliable Design : Composed of six high-quality components (top bushing, body, locking pawl, balls, bottom latch, spring) that can be manufactured in different metallurgies to meet the requirements of standard, sour, and high-temperature applications. Molded or bonded seals ensure multiple connections and disconnections without seal damage.

6.Easy Operation & Maintenance : Features left-hand release (right-hand release available as an option) and automatic reconnection when setting down weight, making it simple to operate even for inexperienced operators. The tool can be redressed on location to reduce downtime.

7.Wireline Compatibility : Equipped with standard wireline plug profiles (Otis 'X' and 'N' profiles as standard, others available on request) to facilitate debris circulation and temporary plugging of the packer without killing the well.

 

Application Scenarios

 

- Well Production & Injection : Ideal for daily production and injection operations, enabling quick disconnection and reconnection of rod strings to facilitate maintenance and adjustments.

- Remedial Work : Used in well repair, rod string replacement, and paraffin removal operations, allowing these tasks to be completed without unseating the pump or damaging equipment.

- Fracturing Operations : Compatible with fracturing processes, providing a reliable disconnect point to protect the well system during high-pressure operations.

- Crooked & Sandy Wells : Effectively used in crooked holes to avoid plunger damage during lowering, and in sandy wells to simplify pump assembly removal.

- Fiberglass Tubing Wells : Specifically suitable for use with fiberglass tubing, ensuring safe and efficient operation without damaging the tubing material.

- Packer Compatibility : Works with most mechanically locked packers, allowing tubing string disconnection without releasing the packer, reducing workover time and costs.

 

FAQ

 

Q: How does the On-Off Tool work?

A: The On-Off Tool is attached directly to the sucker rod string or tubing string at the desired disconnect position in the well. To disconnect, simply rotate the rod string and lift it; to reconnect, set down weight in the bottom latch section and rotate the rod string in the opposite direction. The tool's internal locking mechanism ensures secure connection and disconnection, with automatic reconnection when weight is applied.

 

Q: What types of well conditions is the On-Off Tool suitable for?

A: Our On-Off Tool is highly adaptable and suitable for various well conditions, including crooked holes, sandy wells, wells with severe paraffin conditions, high-temperature and high-pressure wells, and wells with fiberglass tubing. It can also be used with "bottled up" pumps and most mechanically locked packers.

 

Q: Can the On-Off Tool be reused multiple times?

A: Yes, the On-Off Tool is designed for repeated use. Its bonded or molded seals allow multiple connections and disconnections without seal damage, and the tool can be redressed on location to extend its service life. With proper maintenance, it can serve for a long time in various well operations.

 

Q: What is the difference between left-hand release and right-hand release?

A: The standard On-Off Tool features left-hand release, which means the tool is disconnected by rotating the rod string counterclockwise (left-hand rotation). Right-hand release is an optional feature, where disconnection is achieved by rotating the rod string clockwise (right-hand rotation). The choice depends on your specific operational habits and well system requirements.

 

Q: Can we customize the On-Off Tool according to our well specifications?

A: Yes, we offer full customization services. We can adjust the tool's material (e.g., 316 stainless steel for corrosive environments), size (casing size, tubing connection), release type (left-hand or right-hand), wireline profile, and operating parameters (temperature, pressure) to match your specific well conditions and operational needs. Please contact our sales team to discuss your customization requirements.

 

Q: How to maintain the On-Off Tool to ensure its performance?

A: Regular maintenance is recommended to ensure the tool's optimal performance. After each use, clean the tool to remove dirt, debris, and corrosion; inspect the seals, locking mechanism, and other components for wear or damage, and replace any damaged parts in a timely manner. We also provide maintenance guidance and replacement parts to help you keep the tool in good condition. For detailed maintenance instructions, please refer to the product manual or contact our technical support team.

 

Q: What is the lead time for ordering the On-Off Tool?

A: The lead time depends on the order quantity and whether customization is required. For standard models, the lead time is 7-15 working days; for customized models, it may take 20-30 working days. We will confirm the exact lead time with you after receiving your order and provide timely updates on the production progress.

 

Q: Do you provide technical support and after-sales service?

A: Yes, we provide comprehensive technical support and after-sales service. Our professional technical team can offer guidance on tool installation, operation, and maintenance; we also provide replacement parts supply and repair services if needed. If you encounter any problems during use, please contact us at any time, and we will respond within 24 hours to provide a solution.

 

Q: Is the On-Off Tool compatible with all types of packers?

A: The On-Off Tool is compatible with most mechanically locked packers that do not require tubing compression or tension to maintain a pack-off. It can be mounted above a locking type packer to disconnect the tubing string without releasing the packer, reducing workover time and costs. If you are unsure about compatibility with your specific packer model, please provide the packer specifications, and we will verify it for you.

 

Q: What certification does the On-Off Tool have?

A: Our On-Off Tool meets international industry standards and has passed ISO 9001 quality management system certification. It also complies with API (American Petroleum Institute) standards, ensuring its quality and performance meet the requirements of the global oil and gas industry. We can provide relevant certification documents upon request.

 

 

Hot Tags: on-off tool, China on-off tool manufacturers, suppliers, factory, Tubing Anchor Catcher, Hydraulic Anchor, Liner Pipe, Equalizing Check Valve, Mechanical Cement Retainer, Circulation Valve

Item

Specification

Optional Specification

Material

4130-45 Steel

316 Stainless Steel

Release Type

Left-Hand Release

Right-Hand Release

Seal Type

Bonded/Molded Seals

High-Temperature Resistant Seals

Wireline Profile

Otis 'X' and 'N' Profiles

Custom Profiles on Request

Casing Size (Inch)

3.750, 4.500, 5.500

Custom Sizes Available

Tubing Connection

2.375" EU 8 RD

Custom Connections on Request

Operating Temperature

-40℃ to 150℃

Up to 200℃ (High-Temperature Version)

Operating Pressure

0-70 MPa

Up to 105 MPa (High-Pressure Version)

Weight

15-25 kg (Based on Size)

Custom Weight Based on Requirements

Send Inquiry