Electric Three-way Control Valve | Mixing Diverting Regulator

Electric Three-way Control Valve | Mixing Diverting Regulator
Details:
Welcome to our product page for the Electric Three-way Control Valve, high-performance fluid control for industrial automation. Electric actuator + three-way body, precise regulation for mixing two streams or diverting one into two. 4-20mA/0-10mA DC or 0-10VDC, 24VAC, linear actuator (VTRD/PSL/3810), IP55. Accuracy ±1%, ratio 30:1, linear/equal% flow. Multi-point guidance anti-jam, optional bellows seal. Body HT200/WCB/CF8/CF3, core 1Cr18Ni9Ti/Stellite/316L, PTFE/graphite seal. DN20-300, PN1.0-16MPa, -60~450°C. Flange/thread/weld. Leak Class IV/VI. CE/EMC/IEC. For petrochemical, power, HVAC, food/pharma.
Send Inquiry
Add To Inquiry
Download
Description
Technical Parameters

Product Introduction

 

Our Electric Three-way Control Valve is a key automation component integrating electric actuator with three-way body, regulating flow/pressure/temp of water, steam, oil, gas, chemicals accurately. Third port enables mixing (two streams into one) and diverting (one into two). Actuator accepts 4-20mA/0-10mA DC to auto-adjust opening, precise modulation. Simplifies system design, reduces investment, enhances efficiency. Linear actuator (VTRD/PSL/3810), 24VAC, IP55, accuracy ±1%, ratio 30:1, linear/equal% flow. Multi-point guidance anti-jam, optional bellows. Body HT200/WCB/CF8/CF3, core 1Cr18Ni9Ti/Stellite/316L, PTFE/graphite seal. DN20-300, PN1.0-16MPa, -60~450°C. Flange/thread/weld. Leak IV/VI. CE/EMC/IEC. For petrochemical, power, HVAC, food/pharma.

 

Product Features

 

1.Superior Stability & Reliability: Fluid acts on the valve core in a flow-open state ensuring stable operation. Multi-point guidance design (valve cover bushing + core/seat guidance) provides a large guiding area, preventing valve jamming and extending overall service life significantly in continuous industrial operation.

2.High Adjustment Precision: With advanced servo amplifier technology and precise actuator control, the valve achieves an adjustment accuracy of ±1.0% and turndown ratio of 30:1, ensuring precise control of flow, pressure, and temperature in complex industrial process systems. Linear or equal percentage flow characteristic available.

3.Cost-Effective System Design: Compared to single-seat, double-seat, or sleeve control valves, our three-way valve eliminates the need for an additional valve when building the same control system, simplifying installation work, reducing pipeline complexity, and saving overall automation investment costs substantially.

4.Flexible Control Options: The electric actuator supports multiple control modes (on-off, floating, proportional) and accepts standard control signals (4-20mA.DC, 0-10mA.DC, 0-10VDC optional). Features a manual operation device for easy commissioning or emergency operation when power fails unexpectedly. 24VAC power, IP55 protection.

5.Excellent Sealing Performance: Optional bellows sealing type forms a complete seal on the moving valve stem, preventing any fluid leakage and ensuring environmental safety and energy conservation. Standard models use high-quality PTFE packing or flexible graphite packing, with EPDM O-ring option for reliable sealing performance.

6.Durable, Low Maintenance & Standards: Actuator and valve body adopt separate design for easy maintenance. Actuator equipped with overload, short-circuit, reverse polarity protection, endpoint automatic detection. Valve components resist corrosion, wear, high temperature. Complies with CE, EMC 2004/108/CE, EN61326-1, ISO7005, IEC 60534, flange compatible globally.

 

Working Principle

 

The Electric Three-way Control Valve operates through linear electric actuator driving core in three-way body: controller sends 4-20mA/0-10mA DC to servo amplifier, converting to motor rotation via gearbox to stem thrust, moving core up/down, changing alignment between core windows and ports. Mixing: two inlets combine to one outlet, core sets mix ratio. Diverting: one inlet splits to two outlets, core sets split ratio. Flow-open design ensures stable operation. Multi-point guidance prevents jamming. Linear/equal% flow by core shape. Fully shifted: one port open, other closed. Accuracy ±1%, ratio 30:1. Optional bellows seals stem. Manual override for power failure. 24VAC power, no air.

 

Application Scenarios

 

Petrochemical & Natural Gas: Heat exchange temp control, crude oil processing mixing, catalyst mixing, high-pressure gas distribution. Stable process temps, precise fluid proportioning, improves production efficiency and quality.

Power Industry: Boiler feedwater temp control, reactor cooling regulation, desulfurization/denitrification. Mixes high-temp return with low-temp makeup, reducing thermal shock to boiler pipelines, stable nuclear auxiliary systems.

HVAC & Building Intelligence: Central AC, floor heating, data center liquid cooling. Adjusts cold/hot water mixing ratio for precise regional temp control, saving 15-20% energy vs traditional valves. AHUs, cooling towers.

New Energy & Environmental: Photovoltaic/wind power coolant control, hydrogen production/storage, sewage treatment. Regulates coolant flow, controls hydrogen/inert gas mixing, adjusts sludge concentration in biochemical pools.

Food, Pharma, Metallurgy & Paper: Food/beverage mixing (syrup, milk, water), pharma reactor control, FDA materials, mirror polish Ra≤0.8μm, GMP. Metallurgy blast furnace cooling, pulp bleaching agent concentration.

 

Quality Assurance

 

Every Electric Three-way Control Valve undergoes rigorous quality control from raw material to finished product. Body/bonnet HT200/WCB/CF8/CF3, 100% NDT, certified MTR, PMI. Core - 1Cr18Ni9Ti/Stellite/316L, precision machined, window verified, matched. Sealing - PTFE, flexible graphite, EPDM O-ring, bellows optional, leak-tested. Assembly - stem travel calibrated, accuracy ±1% verified, ratio 30:1 tested, mixing/diverting function tested, linear/equal% flow tested. Actuator - linear (VTRD/PSL/3810) calibrated, 4-20mA/0-10mA/0-10VDC tested, 24VAC tested, IP55 verified, protection functions tested, manual override tested. Pressure - shell hydro 1.5×, seat leak metal Class IV (0.01%) / soft Class VI (bubble-tight), full stroke. Connection - flange/thread/weld, dimensional inspected. Standards CE, EMC, EN61326-1, ISO7005, IEC 60534. Warranty 18 months.

 

FAQ

 

Q1: What is an electric three-way control valve, and mixing vs diverting?

A: Electric three-way valve uses electric actuator driving core in three-way body. Mixing: two inlets combine to one outlet, core sets mix ratio. Diverting: one inlet splits to two outlets, core sets split ratio. Replaces two two-way valves + tee, simplifies pipeline.

 

Q2: What control signals, power, and flow characteristics?

A: Control signals: 4-20mA.DC, 0-10mA.DC, 0-10VDC optional. Power supply: 24VAC±20%, 50/60Hz. Flow: linear, equal percentage (straight-through equal%, angle linear). Accuracy ±1%, ratio 30:1. Actuator VTRD/PSL/3810, IP55 (IP65/67 optional).

 

Q3: What is bellows seal, and when do I need it?

A: Bellows seal is an optional metal bellows around moving stem, forming a complete hermetic seal preventing any fluid leakage along stem - zero fugitive emission. Standard uses PTFE packing or graphite. Need bellows for toxic, hazardous, expensive media where packing leakage unacceptable.

 

Q4: What materials, temp, pressure, sizes, connections?

A: Body/bonnet: HT200, WCB, CF8, CF3. Core: 1Cr18Ni9Ti, Stellite, 316L. Seal: PTFE, graphite, EPDM O-ring, bellows optional. Temp: -60~450°C, low-temp -196~-45°C, radiator >230°C. PN1.0-16MPa. DN20-300. Flange/thread/weld.

 

Q5: What leakage class, standards, protection, warranty?

A: Leakage: metal seal Class IV (0.01% rated), soft seal Class VI (bubble-tight). Protection: IP55 standard, IP65/IP67 optional for harsh environments. Standards: CE, EMC, EN61326-1, ISO7005, IEC 60534. Actuator: overload, short-circuit, reverse polarity, endpoint detection. 18-month warranty, OEM/ODM.

 

Hot Tags: Electric Three-way Control Valve | Mixing Diverting Regulator, China Electric Three-way Control Valve | Mixing Diverting Regulator manufacturers, suppliers, factory, prv valves, pressure regulator for irrigation system, steam regulator valve, cylinder pressure regulator, adjustable water regulator, tank blanketing

Item Specification
Product Name Electric Three-way Control Valve (Mixing/Diverting)
Design & Manufacturing Standard CE, EMC 2004/108/CE, EN61326-1:2006, ISO7005, IEC 60534
Nominal Pressure PN1.0, 1.6, 4.0, 6.4, 16 MPa (Class 150 LB ~ 600 LB)
Nominal Diameter DN20-DN300 (NPS 3/4" ~ 12")
Operating Temperature -60°C ~ +450°C; Special low-temp: -196°C ~ -45°C; Radiator type for >230°C
Body Material HT200, ZG230-450, ZG1Cr18Ni9Ti, WCB, CF8, CF3 (Customizable)
Trim Material 1Cr18Ni9Ti, Stellite Alloy Overlay, Brass, Bronze, 316L Stainless Steel (Customizable)
Sealing Material PTFE, Flexible Graphite, EPDM O-ring, Bellows (Optional)
Connection Type Flange (FF, RF, MF, RTJ), Threaded (SW), Welded (BW)
Operation Mode Electric Straight-stroke Actuation, 4-20mA.DC / 0-10mA.DC / 0-10VDC Signal, 24VAC Power, On-off/Floating/Proportional
Flow Channel Three-way Mixing (A+B→AB) or Diverting (AB→A+B), Flow-open Core, Multi-point Guidance, Linear/Equal Percentage Flow
Actuator Type Linear Straight-stroke Electric Actuator (VTRD, PSL, 3810 Series), Manual Override, IP55 (Optional IP65/IP67)
Test Standard Adjustment Accuracy ±1.0%, Turndown Ratio 30:1, Shell Hydro 1.5×, Leakage Metal Class IV (0.01%) / Soft Class VI (Bubble-tight), Full Stroke
Optional Certifications CE, EMC, EN61326-1, Overload/Short-circuit/Reverse Polarity Protection, Endpoint Auto Detection, 18-Month Warranty
Send Inquiry