Product Introduction
Our Electric Sleeve Regulating Valve is a high-performance control valve of electric actuator and sleeve body. Receives 4-20mA/0-10mA/1-5V DC signals, drives sleeve spool changing flow area, automatic regulation of flow/pressure/temperature. General-purpose IEC valve, compact structure, small unbalanced force, large flow capacity, solving air-source reliance. Integrated electronic actuator built-in controller eliminates external servo amp, optional HART for parameters and fault diagnosis. Pressure-balanced spool, porous sleeve ~10dB noise reduction anti-cavitation. Materials WCB/304/316/WC6/WC9/Ti/Ni/Hastelloy/Monel, -40~450°C, PN1.6-10MPa, DN20-300. Linear/equal%/quick opening via sleeve swap. For petrochemical, power, metallurgy, water treatment.
Product Features
1.High Precision Regulation: Integrated electronic actuator with built-in controller module, eliminating need for external servo amplifier. Optional HART protocol for parameter setting, stroke self-calibration, fault diagnosis. Basic error ±2.5%, adjustable ratio 50:1, precise positioning minimal dead zone, stable regulation.
2.Stable Low-Noise Operation: Pressure-balanced spool design greatly reduces medium unbalanced force, lowers actuator output force requirement, allows large pressure difference. Porous sleeve splits fluid, reducing noise about 10dB vs ordinary single/double seat valves, multi-stage pressure reduction prevents cavitation, safer working environment.
3.Wide Material & Temp/Pressure Adaptability: Body materials WCB, 304, 316, WC6, WC9, titanium, nickel, Hastelloy, Monel for different corrosive media. Temp -40~+230°C standard, +230~+450°C high-temp type, -196~+560°C customizable. PN1.6/2.5/4.0/6.4/10.0MPa, suitable for high-temp/high-pressure/corrosive environments.
4.Easy Maintenance & Flow Characteristic Swap: Simplified internal structure for convenient assembly, disassembly, and on-site maintenance. By replacing sleeves with different window shapes, flow characteristics (linear, equal percentage, quick opening) can be easily changed without replacing valve body, reducing maintenance and upgrade costs significantly.
5.Intelligent & Automatic Integration: Seamlessly integrates with automatic control systems, supports remote monitoring and operation, aligning with smart factory development trends. Ideal for remote control stations where laying electrical cables is more economical and reliable than laying compressed air source pipelines, no air supply required.
6.Multiple Sealing & Leakage Options: Three sealing configurations are available - single-seal Class IV, double-seal Class III, soft seat Class VI (per GB4213-92 standard). Choose based on leakage requirements: single-seal for general, double-seal for higher pressure, soft seat for zero-leakage critical applications. Flange per JB/HG/GB/ANSI/JIS/DIN.
Working Principle
The Electric Sleeve Regulating Valve operates through integrated electronic actuator driving sleeve spool: controller sends 4-20mA/0-10mA/1-5V DC signal to actuator (3810L/381LS series), converting signal to stem thrust via motor/gearbox, moving pressure-balanced spool up/down inside porous sleeve, changing alignment between spool windows and sleeve ports, altering flow area to regulate flow/pressure/temperature. Pressure-balanced design cancels medium force, reducing thrust requirement, allowing large differential pressure. Porous sleeve splits fluid multi-stage, reducing noise ~10dB and preventing cavitation. Flow characteristic (linear/equal%/quick opening) determined by sleeve window shape, swappable by replacing sleeve. Fully closed achieves leakage Class IV/III/VI by seal type. Built-in controller self-calibration, fault diagnosis, optional HART. Electric power only, no compressed air.
Application Scenarios
Petrochemical Industry: Reaction kettle temp control, solvent flow regulation, oil/gas pipeline pressure regulation. Pressure-balanced for high differential pressure, corrosion-resistant materials.
Power Industry: Steam and hot oil regulation in thermal power plants, medium control in nuclear power equipment. High-temp type +230~450°C available, stable low-noise operation.
Metallurgy Industry: Fluid control in smelting processes, cooling water system regulation. Durable body materials withstand harsh industrial conditions, easy on-site maintenance.
Water Treatment & Environmental: Sewage treatment, waste gas treatment, water supply/drainage flow control. Electric actuation no air source needed, remote monitoring for unmanned stations.
Other Industries: Food processing, pharmaceutical purification/batching, building HVAC, machinery manufacturing, fire protection systems. Multiple seal options, soft seat Class VI for hygienic zero-leak.
Quality Assurance
Every Electric Sleeve Regulating Valve undergoes rigorous quality control from raw material to finished product. Body WCB/304/316/WC6/WC9/Ti/Ni/Hastelloy/Monel, 100% NDT, certified MTR, PMI. Sleeve/spool - precision machined, matched pair, window shape verified. Packing - V-type PTFE or flexible graphite, leak-tested. Assembly - stem travel calibrated, basic error ±2.5% verified, ratio 50:1 tested, flow characteristic tested per sleeve. Actuator - integrated electronic (3810L/381LS) calibrated, 4-20mA/0-10mA/1-5V DC tested, self-calibration, HART optional tested. Pressure - shell hydro 1.5×, seat leak per GB4213-92 (Class IV/III/VI), full stroke, noise verified. Connection - flange JB/HG/GB/ANSI/JIS/DIN, dimensional inspected. Standards IEC, GB4213-92. Certifications ISO 9001, CE. Warranty 18 months.
FAQ
Q1: What is an electric sleeve regulating valve, and how does sleeve design differ from single-seat?
A: Electric sleeve valve uses actuator driving spool inside porous sleeve, changing window alignment to regulate flow. Unlike single-seat, sleeve is pressure-balanced (low force, large ΔP), porous sleeve reduces noise ~10dB/anti-cavitation, flow characteristic swappable via sleeve.
Q2: What control signals and actuator options are available?
A: Signals: 4-20mA DC, 0-10mA DC, 1-5V DC. Actuator: integrated electronic (3810L/381LS series), built-in controller, no external servo amp. Optional HART for parameters, self-calibration, fault diagnosis, remote monitoring. Electric power only, no air.
Q3: What flow characteristics and accuracy does it provide?
A: Flow: linear, equal percentage, quick opening - determined by sleeve window shape, swappable without body replacement. Basic error ±2.5%, adjustable ratio 50:1. Leakage: single-seal Class IV, double-seal Class III, soft seat Class VI per GB4213-92.
Q4: What materials, temperature, pressure, sizes are available?
A: Body: WCB, 304, 316, WC6, WC9, Ti, Ni, Hastelloy, Monel. Temp: -40~+230°C standard, +230~+450°C high-temp, -196~+560°C custom. PN1.6-10MPa. DN20-300. Flange JB/HG/GB/ANSI/JIS/DIN. Packing V-type PTFE or graphite.
Q5: How do I change flow characteristic, and what is warranty?
A: Flow characteristic changed by replacing sleeve with different window shape (linear/equal%/quick), no body replacement needed - simple, low cost. Pressure-balanced for large ΔP, porous sleeve ~10dB noise reduction. Standards IEC, GB4213-92. ISO 9001, CE. 18-month warranty, OEM/ODM.
Hot Tags: Electric Sleeve Regulating Valve | Precision Flow Control, China Electric Sleeve Regulating Valve | Precision Flow Control manufacturers, suppliers, factory, regulator valve gas, pressure regulator for hose, natural gas pressure regulators, cylinder pressure regulator, rv pressure reducer, flow regulator valve
| Item | Specification |
|---|---|
| Product Name | Electric Sleeve Regulating Valve |
| Design & Manufacturing Standard | IEC, GB4213-92, ISO 9001, CE |
| Nominal Pressure | PN1.6, 2.5, 4.0, 6.4, 10.0 MPa |
| Nominal Diameter | DN20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300 mm |
| Operating Temperature | Standard: -40~+230°C; High-temp: +230~+450°C; Customizable: -196~+560°C |
| Body Material | WCB, 304, 316, WC6, WC9, Titanium, Nickel, Hastelloy, Monel |
| Trim Material | Pressure-balanced Sleeve Spool, Porous Sleeve, V-type PTFE or Flexible Graphite Packing |
| Sealing Material | Single-seal Class IV, Double-seal Class III, Soft Seat Class VI (GB4213-92) |
| Connection Type | Flange (JB/79.1-94, HG20592-97, GB, ANSI, JIS, DIN) |
| Operation Mode | Integrated Electronic Electric Actuation, 4-20mA DC / 0-10mA DC / 1-5V DC, Optional HART |
| Flow Channel | Straight-through, Sleeve-type, Pressure-balanced Spool, Porous Sleeve (Noise Reduction ~10dB, Anti-cavitation) |
| Actuator Type | Integrated Electronic Electric Actuator (3810L Series, 381LS Series), Built-in Controller, No External Servo Amplifier |
| Test Standard | Basic Error ±2.5%, Adjustable Ratio 50:1, Flow Characteristic (Linear/Equal%/Quick Opening), Shell Hydro 1.5×, Leakage GB4213-92, Noise Test |
| Optional Certifications | ISO 9001, CE, HART Protocol, Stroke Self-calibration, Fault Diagnosis, Remote Monitoring, 18-Month Warranty |






