Balanced Throttle Shut-off Valve | Pressure-Balanced Plug Dual Seal Valve

Balanced Throttle Shut-off Valve | Pressure-Balanced Plug Dual Seal Valve
Details:
Welcome to our product page for the Balanced Throttle Shut-off Valve, a dual-function valve integrating flow throttling and positive shut-off in one body, featuring a pressure-balanced plug with balance holes that reduces operating torque to only 4 N·m up to 100 bar — 80–95% less than unbalanced designs. Dual sealing system combines Stellite metal hard seal and NBR/PTFE soft seal for bubble-tight zero leakage. Available in DN25–DN300 with PN16–PN320 (Class 150–2500) pressure ratings and -29~121℃ temperature range (special models to 225℃). Supports manual tee-handle, electric, pneumatic and hydraulic actuation, with RF/RTJ/butt-weld/clamp end connections. Compliant with API 6D/600, ASME B16.34, API 598, PED Category IV and ISO 9001 standards. Widely used in oil & gas wellheads, high-pressure chemical, power boiler, heating and high-pressure storage applications. 18-month warranty.
Send Inquiry
Add To Inquiry
Download
Description
Technical Parameters

Product Introduction

 

Our Balanced Throttle Shut-off Valve combines precise flow throttling and reliable bubble-tight shut-off in a single body, eliminating the need for separate throttle and block valves. The pressure-balanced plug with precision balance holes equalizes pressure across the plug, drastically reducing operating torque and enabling effortless manual operation or smaller actuator sizing for automated service. The dual sealing structure with Stellite hardfaced primary seal and recessed soft seal delivers both erosion-resistant throttling performance and zero-leakage shut-off. The contoured conical/parabolic plug provides 50:1 rangeability with precise repeatable adjustment. Available in a wide range of body and trim materials, actuation options and end connections, it serves as a compact, low-torque flow control solution for high-pressure oil & gas, chemical, power and industrial process systems.

 

Product Features

 

1.Pressure Self-Balancing Design: Precision-drilled axial balance holes equalize pressure on both sides of the plug, eliminating unbalanced axial force and minimizing operating torque to ~4 N·m at 100 bar - an 80–95% reduction versus unbalanced valves. Enables small tee-handle operation of large high-pressure valves without gear reduction, and reduces actuator size/cost by 30–50% for automated service.

2.Dual Sealing Assurance: Dual structure of Stellite metal-to-metal hard seal and NBR/PTFE soft seal. The hard seal serves as the primary wear-resistant throttling surface; the recessed soft seal engages only in the final 1/8 turn of closure for bubble-tight zero leakage, protected from high-velocity flow during throttling to extend service life. Both seals are inline-replaceable without valve body removal.

3.Precise Throttle Regulation: Conical/parabolic contoured plug delivers progressive opening at low flow and linear mid-range regulation. 2mm stem travel per full handwheel turn enables precise repeatable adjustment; 1/8 turn after plug contact achieves tight shut-off. Cv accuracy ±5% per IEC 60534-2-1, with up to 50:1 rangeability. Multiple trim characteristics available per process requirements.

4.Durable & Corrosion-Resistant Construction: Body available in WCB carbon steel, CF8/CF8M stainless steel, WC6/WC9/F22 alloy steel, with Stellite 6 hardfacing (HRC 40–45) on sealing surfaces for enhanced wear and erosion resistance. Hard chrome plated or nitrided stem for scratch resistance. NACE MR0175 sour service option available.

5.Easy Installation & Maintenance: Suitable for both horizontal and vertical installation; compact structure with shorter face-to-face than separate throttle + block valve pairs. Internal components are inline-replaceable without removing the valve body; bolted bonnet enables easy access to internals; backseat allows packing replacement under pressure.

6.International Certification & Compliance: PED 2014/68/EU Category IV certified - the highest pressure equipment safety category. Also compliant with API 6D, API 600, ASME B16.34, ISO 9001 standards. Optional CRN, NACE MR0175, SIL 2/3, API 607 and ISO 15848 certifications available.

 

Working Principle

 

The Balanced Throttle Shut-off Valve: OS&Y rising stem, balanced plug, dual seal, contoured orifice. Stem moves plug to/from orifice. Balance holes equalize pressure, torque ~4 N·m at 100 bar. Contoured plug increases flow area for stepless throttling (2mm/turn, 50:1). Closing: Stellite hard then NBR/PTFE soft seal final 1/8 turn, bubble-tight; soft seal protected. BLX adds slam-shut for ESD. Bolted bonnet, graphite/PTFE packing, backseat. Straight/angle body. Manual/electric/pneumatic/hydraulic. Not for dead-end isolation - use with block valve.

 

Application Scenarios

 

Petroleum & Natural Gas Industry: Used for wellheads, gathering stations, pressure reducing stations and pipeline systems for throttling, pressure regulation and shut-off. Balanced plug enables effortless manual operation at wellhead pressures up to 100 bar; dual seal provides reliable wellhead isolation; BLX slam-shut model for wellhead wing valves and ESD.

Chemical Industry: Applied in high-pressure reactors, chemical pipelines and storage tanks for reaction material flow and pressure control. Balanced design enables precise low-torque throttling of high-pressure chemical feeds; dual seal provides bubble-tight shut-off for reactor isolation; Stellite hard seal resists corrosive/erosive chemicals.

Power Industry: Used for boiler feedwater, main steam and extraction steam pipelines for flow and pressure regulation. Balanced plug reduces torque for high-pressure feedwater up to PN320; contoured plug provides precise feedwater flow control; WC6/WC9/F22 alloy body for high-temperature steam service.

Thermal Power & District Heating: Used in thermal station loops, district heating networks and CHP plants for flow balancing and hydraulic imbalance prevention. Low-torque manual operation enables easy field flow balancing; dual seal provides maintenance isolation; stable flow regulation prevents underflow/overflow and hydraulic imbalance.

Other Industrial Fields: Used in high-pressure storage tanks, separators, gas transmission/compressor stations, water injection wells and refinery hydrocracker systems. BLX model for ESD and overpressure protection; material, trim and actuation configurable per application.

 

Quality Assurance

 

Every Balanced Throttle Shut-off Valve is manufactured and tested per ISO 9001, PED 2014/68/EU Category IV, API 6D, API 598, ASME B16.34, GB/T 12234. Raw materials MTR-verified with PMI and heat treatment. Castings RT/UT; machining dimensions verified. Hardfacing, soft seal, balance holes, Cv verified. Assembly and dual seal verified. Pressure shell 1.5×, seat 1.1× API 598. Torque, stroke, BLX slam-shut tested. PED IV assessed; heat traceable. Ship with MTR, certs, PED DoC. 18-month warranty. API 6D, CRN, NACE, SIL on request.

 

FAQ

 

Q1: What is a balanced throttle shut-off valve, and how does it differ from a regular throttle valve?

A: It integrates both throttling regulation and positive shut-off in one body. Unlike unbalanced throttle valves, it has pressure balance holes that equalize pressure across the plug, reducing operating torque by 80–95% to ~4 N·m at 100 bar, enabling easy manual operation or smaller actuators. It provides both throttling and shut-off, unlike gate/ball valves which are on-off only.

 

Q2: How do pressure balance holes work, and what is the trade-off?

A: Axial balance holes communicate pressure above and below the plug, equalizing both sides to eliminate net differential pressure force, leaving only friction to overcome. The trade-off is that it is not suitable for dead-end service, as downstream pressure communicates with upstream through the holes. Use in series with a dedicated block valve for dead-end isolation.

 

Q3: What is the dual seal, and why use both hard and soft seals?

A: The Stellite metal hard seal is durable, wear/corrosion resistant, and handles high-velocity flow wear during throttling. The NBR/PTFE soft seal provides bubble-tight zero-leakage shut-off when fully closed, and is recessed to protect it from flow during throttling. This combines the durability of metal sealing with the tightness of soft sealing, extending overall service life.

 

Q4: What is the difference between BLE and BLX models?

A: BLE (standard) is a balanced throttle valve without slam-shut, for general pressure/flow regulation and isolation. BLX (optional) adds an integrated slam-shut mechanism that rapidly closes the valve on overpressure/underpressure or ESD signal, for wellhead wing valves, transmission bypass and reactor emergency isolation applications.

 

Q5: How precise is the flow regulation, and what trim characteristics are available?

A: The contoured plug provides progressive-linear flow with 50:1 rangeability; 2mm stem travel per handwheel turn enables precise repeatable adjustment. Cv accuracy is ±5% per IEC 60534-2-1. Available trim characteristics include progressive-linear (standard), linear, equal-percentage, quick-opening and custom profiles.

 

Hot Tags: Balanced Throttle Shut-off Valve | Pressure-Balanced Plug Dual Seal Valve, China Balanced Throttle Shut-off Valve | Pressure-Balanced Plug Dual Seal Valve manufacturers, suppliers, factory, auto drain plug, valves for oil and gas industry, 12 valve oil pump, oil relief valve, oil gas valves, oil control valves

Item Specification
Product Name Balanced Throttle Shut-off Valve
Valve Type Pressure-balanced plug dual-seal valve; throttling + shut-off; OS&Y rising stem
Model BLE (standard, no slam-shut); BLX (optional, with slam-shut/ESD)
Nominal Diameter DN25 – DN300 (1" – 12")
Nominal Pressure PN16 – PN320 (Class 150 – Class 2500)
Operating Temperature -29℃ ~ 121℃ (standard); up to 225℃/450℃ (custom)
Body Material WCB, CF8/CF8M, WC6/WC9/F22 alloy steel; cast or forged
Plug/Trim Material Stellite 6/21 hardfaced, 304/316, 410/440C; HRC 40–45
Seal Material Hard: Stellite metal-to-metal; Soft: NBR (standard), PTFE, Viton/FKM, EPDM
End Connection Flanged RF/RTJ, Butt-Weld, Clamp/Hub, Socket Weld, Threaded NPT
Operation Mode Manual tee-handle (~4 N·m), Handwheel, Bevel Gear, Electric, Pneumatic, Hydraulic
Design Standard API 6D, API 600, ASME B16.34, GB/T 12234
Test Standard API 598, ISO 5208, IEC 60534-2-1; PED Annex I
Certification PED Category IV, ISO 9001; optional CRN, NACE MR0175, SIL 2/3, API 607
Warranty 18 months from shipment
Send Inquiry