In the field of materials science, the search for materials with both ultra - high specific strength and excellent toughness is currently a research hotspot. Nano - martensitic titanium alloys stand out in this field due to their unique structures and properties.
It has been found that, traditionally, precipitates in alloys are regarded as dislocation barriers, which can cause high stress concentration and even micro - cracks. However, after densely distributed nano - martensite is constructed in the tough Ti - Cr - Zr - Al alloy, a hierarchical ordered coherent interface for strength - toughness optimization is formed. These coherent interfaces have the functions of both dislocation barriers and dislocation sources. Through multi - level nano - martensite - dislocation interactions, the titanium alloy has ultra - high strength and toughness. For example, at high temperatures below 400 °C, the nano - martensite is thermally stable and can maintain the high strength of the alloy; when the temperature is higher than 400 °C, the decomposition of multi - level ordered nano - martensite and the spheroidization of the original β - lamellae will lead to the temper - induced ductile - brittle transition.
It can be seen from the graphic data that through the thermal processing process scheme and microstructure evolution, for example, the Ti - 2.8Cr - 4.5Zr - 5.2Al alloy has different microstructure characteristics after being treated at different temperatures. In the room - temperature mechanical property tests, the yield strength and total elongation of this alloy are excellent, having obvious advantages compared with other reported martensitic α′ and tempered martensitic α′ titanium alloys. In terms of fracture properties, this alloy also performs well, with high fracture work and strong fracture resistance, being no less competitive than other typical α + β titanium alloys. Its fracture characteristics present unique phenomena. Under different heat - treatment states, the microstructure on the fracture surface and the crack - propagation mode are all different. Research on the deformation sub - structure shows that dislocations play an important role in the multi - level ordered coherent interfaces of nano - martensitic titanium alloys. Dislocations are emitted and interact along specific slip systems from α′/β phase boundaries (PBs), further enhancing the strength and toughness of the alloy.
In conclusion, the design strategy of multi - level ordered coherent interfaces in nano - martensitic titanium alloys provides a new approach for obtaining an unprecedented combination of strength, plasticity and toughness. This strategy is not only applicable to titanium alloys, but also is expected to be applied to other metastable alloys, such as traditional steels and emerging multi - component alloys, bringing new opportunities and challenges to the development of materials science.
