Mar 03, 2025

The Inter-well Interference (Channeling) Problem and Solution Method of Multi-stage Fractured Horizontal Wells

Leave a message

1. Introduction With the continuous growth of oil and gas demand, multi-stage fractured horizontal well technology, as an efficient mining means, has attracted wide attention in the industry.

However, in actual production, the inter-well interference (channeling) phenomenon often occurs, resulting in the fluid inter-channeling between each fractured fracture, reducing the fracturing effect and oil and gas recovery rate. Therefore, deeply studying the inter-well interference problem of multi-stage fractured horizontal wells and proposing effective solution methods has important practical significance.

2. Causes and manifestation forms of inter-well interference

● Causes Geological factors: The geological characteristics such as reservoir heterogeneity, fracture extension direction and connectivity are important reasons for inter-well interference. For example, the high permeability zone or fracture network in the reservoir may cause the fluid to quickly channel between wells. Unreasonable fracturing design: If the fracturing design parameters such as the injection amount of fracturing fluid, injection pressure, fracture length and spacing are unreasonable, it is easy to cause inter-well interference. For example, excessive injection pressure may cause the fracture to over-elongate, thereby increasing the possibility of inter-well channeling. Production pressure difference: The pressure difference during the production process is the driving force for the fluid to channel between wells. If the production pressure difference is too large, the channeling speed between wells will be accelerated, which will have a greater impact on production.

● Manifestation forms Pressure interference: Inter-well interference will cause the pressure between adjacent wells to affect each other. It is manifested that the pressure change of a certain well will cause the pressure fluctuation of surrounding wells. Production decline: Inter-well channeling will make the fluid in some fractured fractures flow into the production well too early, resulting in an accelerated production decline and affecting the oil and gas recovery rate. Water quality change: If there is channeling between wells, the injected water or formation water between different wells may mix with each other, resulting in water quality changes and affecting the stability of production.

3.Adverse effects of inter-well interference on production

● Reducing oil and gas recovery rate. Inter-well interference will make the fluid in some fractured fractures flow into the production well too early, resulting in the oil and gas in the underexploited reservoir area not being effectively produced, thereby reducing the oil and gas recovery rate.

● Increasing production costs. In order to deal with the production decline and water quality changes caused by inter-well interference, a series of measures need to be taken, such as increasing the injection amount and adjusting the production system, which will increase production costs.

● Affecting production stability. Inter-well channeling may cause the pressure fluctuation and production instability of production wells, increasing the difficulty of production management and affecting the continuity and stability of production.

 

4.Solution methods

● Optimizing fracturing design Reasonably determine the injection amount and injection pressure of fracturing fluid to avoid fracture over-extension and channeling. Optimize the length and spacing of fractures. According to the geological characteristics and production needs of the reservoir, determine the appropriate fracture parameters to reduce the influence of inter-well interference. Adopt segmented fracturing technology. Divide the horizontal well into multiple sections for fracturing. Through reasonable section spacing and fracturing interval time, reduce the influence of inter-well interference.

● Adopting isolation technology Chemical isolation: By adding chemical agents such as temporary blocking agents and cross-linking agents to the fracturing fluid, a temporary isolation barrier is formed during the fracturing process to prevent the fluid from channeling between wells. Mechanical isolation: Use packers, isolation balls and other mechanical devices to isolate adjacent fractured sections and prevent inter-well channeling. Hydraulic isolation: By controlling the injection sequence and injection speed of fracturing fluid and using hydraulic action to form isolation areas in fractures, reduce inter-well interference.

● Numerical simulation optimization. Use numerical simulation software to simulate and analyze the production process of multi-stage fractured horizontal wells, predict the situation of inter-well interference, and optimize fracturing design and production system. Through numerical simulation, the best fracturing parameters, production pressure difference and isolation measures can be determined to improve the oil and gas recovery rate and production stability.

● Real-time monitoring and regulation. Adopt advanced monitoring technologies such as downhole pressure monitoring and produced fluid monitoring to monitor the inter-well interference situation in real time. According to the monitoring results, timely adjust the production system and fracturing measures to effectively control the influence of inter-well interference.

 

V. Conclusion The inter-well interference (channeling) problem of multi-stage fractured horizontal wells is an important factor affecting their development effect.

Through methods such as optimizing fracturing design, adopting isolation technology, numerical simulation optimization and real-time monitoring and regulation, the inter-well interference problem can be effectively solved and the oil and gas recovery rate and production stability can be improved. In practical applications, according to specific geological conditions and production needs, select appropriate solution methods and continuously carry out technological innovation and optimization to promote the further development of multi-stage fractured horizontal well technology.

Send Inquiry