I. Uses of magnesium alloy skins
● Uses of lightweight characteristics
Magnesium alloy is extremely low in density, approximately 2/3 that of aluminum and only 1/4 that of steel. This characteristic makes it the most suitable for weight saving in aircraft manufacturing.
Applications in aircraft auxiliary structures
It is extensively used in aircraft landing gear door, flap slide and other auxiliary structures. The structural strength requirement is relatively low for these structures, but weight reduction has a vital impact on improving the overall performance of aircraft. Magnesium alloy skins can significantly reduce the weight of auxiliary structures, reduce the aircraft takeoff and landing load, and improve flight security.
Applications in non-structural load-carrying components of the aircraft
In some non-structural load-carrying components of the aircraft, such as interior partition frames and luggage compartment partitions, magnesium alloy skins can be employed to efficiently reduce weight without compromising the overall structural integrity of the aircraft much. These components support relatively small loads, and the lightness of magnesium alloy can be fully exploited to reduce aircraft operating costs.
● Surface treatment technology and application. Due to magnesium alloy's poor corrosion resistance, surface treatment must be employed in practical application in order to extend its service life.
Anodic oxidation treatment
This is a common surface treatment technology for magnesium alloy. By forming a dense oxide film on the surface of magnesium alloy, its corrosion resistance and wear resistance can be improved. The anodized magnesium alloy skin has good appearance quality and is suitable for appearance parts such as aircraft radomes.
Coating treatment
Using various coating materials such as organic coatings and inorganic coatings to coat magnesium alloy skins can effectively prevent the corrosion medium from eroding magnesium alloy. The coated magnesium alloy skin has good corrosion resistance and weather resistance and is suitable for parts of the aircraft that are exposed to the external environment for a long time.
● Combined applications with other materials
Combined with composite materials
Combining magnesium alloy with composite materials, such as combining magnesium alloy frames with carbon fiber composite skins, can give full play to their respective advantages. Magnesium alloy provides good mechanical connection performance, and carbon fiber composite materials provide high strength and lightweight characteristics. The combination of the two can achieve the lightweight and high-performance of aircraft structures.
Matched with aluminum alloy
In some cases, magnesium alloy can be used in combination with aluminum alloy. For example, using magnesium alloy bolts to connect aluminum alloy skins at some aircraft connection parts can achieve performance complementarity between different materials and improve the overall performance of aircraft structures.
II. Applications of titanium alloy skins
● High-strength characteristics in key parts
Titanium alloy has extremely high strength. Its strength is several times higher than that of aluminum alloy and not inferior to that of steel. This makes it widely used in key parts of aircraft.
Applications around the engine · The engine is the core component of the aircraft. It generates huge heat and stress during operation. Titanium alloy skins can withstand high-temperature environments and maintain sufficient strength, effectively protecting the internal structure of the engine from the influence of the external environment. They are commonly used in engine nacelle skins, fan covers and other parts.
Applications in high-strength parts of the fuselage · The strengthened frames and wing beams of the fuselage need to withstand huge aerodynamic pressure, inertial force and other loads. The high-strength characteristics of titanium alloy skins can ensure the structural safety of these parts and improve the overall bearing capacity of the aircraft. The application ratio of titanium alloy skins in the fuselage of high-performance fighter aircraft is relatively high.
● Good high-temperature performance in high-temperature environments
Applications in high-temperature components · In addition to parts around the engine, aircraft tail pipes, high-temperature fairings and other high-temperature components also require high-temperature resistant materials. Titanium alloy skins can work stably in high-temperature environments for a long time without significant performance degradation and ensure the normal operation of these components.
Applications in thermal protection systems · In parts such as the leading edge of the aircraft wing and the bottom of the fuselage that require thermal protection, titanium alloy skins can be used as part of the thermal protection system to effectively reduce the impact of external high temperature on the aircraft structure and protect the internal equipment and personnel safety of the aircraft.
● Collaborative applications with other high-temperature materials
Combined with ceramic matrix composites · Combining titanium alloy with ceramic matrix composites, such as using titanium alloy skeletons to support ceramic matrix composite skins inside the tail pipe, can achieve high strength and corrosion resistance in high-temperature environments. Ceramic matrix composites have excellent high-temperature resistance, and titanium alloy provides good mechanical connection performance. The combination of the two can meet the working requirements of the tail pipe under high-temperature and high-speed airflow.
