Simulation of Hydraulic Fracture Propagation by Field - Enhanced Finite Element Method Hydraulic fracturing is widely used as an unconventional energy extraction technology, and its principle is to form a fracture network by injecting fracturing fluid to improve the extraction rate. The fluid - solid coupling finite element method developed in this paper uses field variables to characterize fractures and seepage channels, updates the fracture position according to the fracture criterion and enriched field variables, solves the fluid - solid coupling problem by using the staggered iteration format, and verifies its accuracy through multiple benchmark examples. Research on classic problems such as single - fracture propagation and two - fracture coalescence proves that this method is extensible, the calculated hydraulic - induced fracture propagation path is in good agreement with previous numerical results, and the performance of this method in simulating hydraulic - induced fracture propagation in complex natural fracture networks is also verified.
Mechanical Tests of Soft Rock Materials with Internal Fracture Networks Non - continuous joints are widely present in solid rocks, and the internal fracture propagation and evolution are the internal factors of rock mass engineering disasters. In this study, S3DP specimens with internal fracture networks (IFN) are prepared based on the Monte Carlo method, the influence of four fracture geometric parameters (such as UCS and E, etc.) on the mechanical properties of specimens is quantitatively analyzed, the relationship between fracture parameters and specimen failure characteristics is systematically analyzed, and an innovative method for calculating energy release concentration is proposed. The research results show that some fracture parameters have a significant impact on rock mechanical properties, which provides an important basis for analyzing the stability of rock excavation and control in actual engineering.
Characteristics of Seismic Areas Related to Hydraulic Fracturing in Sichuan Basin In recent years, the increase in injection activities related to hydraulic fracturing and wastewater treatment is related to the increase in seismic activity rate. Taking the southern part of Sichuan Basin as an example, the density - based noise clustering algorithm divides the relocated seismic sources into four seismic areas, so as to obtain information such as the time evolution of seismic activity parameters in each area, the Epidemic - type Aftershock Sequence (ETAS) model is used to calculate the statistical correlation between seismic activities and engineering disturbances, and the relevant characteristics under the regional stress pattern are analyzed. The research shows that seismic activity and unrecognized fault structures should be detected before the activity reaches a dangerous level, and there are potential risks in injection activities.
Conclusion: The research on the field - enhanced finite element method, mechanical tests of soft rock materials with fracture networks, and the characteristics of seismic areas related to fracturing in Sichuan Basin provides important theoretical and practical bases for related fields from different aspects. These research results are helpful for further optimizing hydraulic fracturing technology, improving energy extraction efficiency, and also provide a scientific basis for ensuring the safety of rock mass engineering and dealing with earthquake risks. In the future, the mutual relationships in these fields can be further studied in - depth to promote the development of related technologies and theories.
