Manual Welding Globe Valve | Butt-Weld/Socket-Weld Forged Steel OS&Y Flow Control Valve

Manual Welding Globe Valve | Butt-Weld/Socket-Weld Forged Steel OS&Y Flow Control Valve
Details:
Welcome to our product page for the Manual Welding Globe Valve, a hand-operated industrial flow control valve with forged body and welded end connections (butt-weld / socket-weld), delivering reliable shut-off and precise flow regulation for harsh HP/HT and corrosive environments. Integral welded joints eliminate flange gasket leakage, bolt loosening and joint failure risks. Available in DN15–DN600 with Class 150–300 pressure ratings and -29~540℃ operating range (cryogenic models down to -196℃). Materials cover carbon steel, stainless steel, alloy steel and low-temperature steel with PTFE/SS/graphite seat options. Compliant with API 600, ASME B16.34, MSS SP-70 and API 598 standards. Widely used in petroleum, chemical, power generation, water treatment and metallurgy industries. 18-month warranty.
Send Inquiry
Add To Inquiry
Download
Description
Technical Parameters

Product Introduction

 

Our Manual Welding Globe Valve adopts integral butt-weld or socket-weld end connections that integrate seamlessly with pipelines, fundamentally eliminating interface leakage caused by gasket aging and bolt loosening. The valve body is precision forged from solid steel billets, eliminating internal casting defects for superior structural strength and fatigue resistance. It features outside screw and yoke (OS&Y) rising stem design, with disc stroke proportional to flow opening, supporting both on-off shut-off and throttling flow regulation with stable low-turbulence flow characteristics. Available in a wide range of body and seal materials to adapt to water, oil, gas, steam, acid, alkali and cryogenic media, it serves as a robust, low-maintenance flow control solution for general industrial, power, petrochemical and cryogenic pipeline systems.

 

Product Features

 

1.Integral Welded Zero-Leakage Connection: Butt-weld (DN≥50, per ANSI B16.25) or socket-weld (DN≤40, per ANSI B16.11) ends form a permanent seamless joint with pipelines, eliminating flange gaskets and bolt-related leakage paths. Meets API 598 and EN 12266-1 zero-leakage standards, ideal for critical high-pressure, high-temperature and hazardous media service.

2.Wide Material & Trim Selection: Available in WCB/A105 carbon steel, 304/316/L stainless steel, F5/F11/F22 alloy steel and LCB/LC1/LC2 low-temperature steel grades, with 304/316/2205 duplex/410 trim and PTFE/SS/flexible graphite seat options. All materials come with MTR EN 10204 3.1 material traceability and full mechanical property verification.

3.Precise Proportional Flow Regulation: Disc stroke is proportional to flow opening, enabling accurate flow adjustment and stable throttling performance with minimal turbulence. Suitable for both on-off isolation and flow regulation scenarios, unlike gate valves which are not designed for throttling service. Handwheel delivers fine positional control for precise flow rate tuning.

4.Forged Body + OS&Y Easy Maintenance: Hot-forged body delivers high strength and toughness with refined grain structure. OS&Y design keeps stem threads outside the pressure boundary, protecting threads from media corrosion and galling. Bolted bonnet allows in-line seat/disc inspection and replacement; backseat design enables online packing replacement without line shutdown.

5.Broad Operating Range: Class 150–300 pressure rating, -29~540℃ standard temperature range. Cryogenic models with extended bonnet available down to -196℃ for LNG/LOX/LIN service. Size range DN15–DN600 covers small-bore instrument lines to large industrial pipelines.

6.Global Standards Compliance: Designed and tested per API 600, ASME B16.34, MSS SP-70, EN 1171, GB/T 12235 and API 598 standards. ISO 9001 certified manufacturing with 100% pressure testing and full dimensional inspection. Permanent marking with full material, size, pressure and traceability information.

 

Working Principle

 

Manual Welding Globe Valve: forged S-body (straight/Y-pattern) + butt-weld/socket-weld ends, bolted bonnet, OS&Y rising stem, disc, seat (PTFE/SS/graphite), handwheel (gear opt). Turning rotates stem - rises/lowers, disc moves linearly. Opening: disc lifts, flow area proportional to travel. Closing: disc seats - PTFE soft bubble-tight or SS/graphite metal, zero leak. Disc stroke proportional to flow enables precise regulation (cut-off throttling). OS&Y threads outside body, protected from media. Welded ends - no flange gasket leak. On/off flow regulation. DN15–600, Class 150–3000, -29~540℃ (cryo -196℃). API 600/B16.34/API 598.

 

Application Scenarios

 

Petroleum & Natural Gas: Used in refineries, gas transmission pipelines, oil wellheads and gathering lines. Integral welded joints provide leak-free containment for high-pressure flammable hydrocarbons; OS&Y stem and metal seal deliver fire-safe performance; forged body withstands high pressure and thermal cycling.

Chemical & Pharmaceutical: Applied in chemical processing plants, pharmaceutical clean process lines and CIP/SIP systems. Stainless steel body provides corrosion resistance for acids, alkalis and solvents; bolted bonnet enables in-line maintenance for continuous process facilities; precise flow regulation supports accurate dosing and process control.

Power Generation: Deployed in thermal/nuclear/hydropower plants for main steam, boiler feedwater and cooling water systems. Alloy steel body withstands high-temperature steam up to 540℃; welded connection meets ASME B31.1 power piping standards; OS&Y stem provides visual position indication for operators.

Water Treatment & Cryogenic: Used for municipal water supply/drainage, sewage treatment and desalination systems. Cryogenic models with extended bonnet serve LNG/LOX/LIN storage and transportation systems; zero-leakage welded joints prevent loss of expensive cryogenic media; low-temperature materials maintain toughness at -196℃.

Metallurgy & Mining: Suitable for steel mills, smelters and mining pipelines. Forged body and metal seal resist erosion from particle-laden fluids and abrasive media; welded structure withstands thermal cycling and mechanical vibration; manual operation is robust and reliable in dusty, high-temperature environments.

 

Quality Assurance

 

Every Manual Welding Globe Valve: Forging - forged body, ≥3:1, UT. Material - WCB/A105/SS304/316/304L/316L/CF8/CF8M/F5/F11/F22/LCB/LC1/LC2, MTR 3.1, heat traceable. Trim - 304/316/2205/410/F11/F22, machined. Seat - PTFE/SS/graphite, certified. Weld ends - butt-weld B16.25 or socket-weld B16.11, checked. Assembly - OS&Y stem, full stroke, no binding. Pressure - 100% shell 1.5×PN, seat 1.1×PN, zero leak API 598. Functional - handwheel cycle, smooth. Cryogenic test. Surface - CS epoxy, SS pickled. Marking - permanent material/size/pressure/serial. Standards API 600/B16.34/MSS SP-70/EN 1171/GB/T 12235. ISO 9001. Docs - MTR, hydrotest, cert. Lead: 25–45 days. Warranty: 18 months.

 

FAQ

 

Q1: What is the difference between butt-weld and socket-weld connections?

A: Butt-weld (per ANSI B16.25) is for DN≥50, providing full penetration weld with maximum strength, suitable for large sizes, high pressure, cyclic service and corrosive media. Socket-weld (per ANSI B16.11) is for DN≤40 small-bore applications, easier to align and install, recommended for instrument air, hydraulic and small process lines. Both eliminate flange gaskets and deliver leak-free joints.

 

Q2: What body materials are available, and how do I select?

A: Carbon steel (WCB/A105) for general water/steam/oil service (-29~425℃); stainless steel (304/316/L) for corrosive chemical and sanitary service (-196~450℃); alloy steel (F5/F11/F22) for high-temperature steam service up to 540℃; low-temperature steel (LCB/LC1/LC2) for cryogenic service down to -196℃.

 

Q3: Can this valve be used for throttling flow regulation?

A: Yes, the globe valve is inherently suitable for both on-off shut-off and throttling regulation. Disc stroke is proportional to flow opening for stable, predictable flow adjustment. For continuous severe throttling service, dedicated control valves with hardened trim are recommended; for isolation, bypass and occasional flow adjustment, this valve is ideal.

 

Q4: What is the temperature range, and are cryogenic models available?

A: Standard temperature range is -29~540℃ depending on material. Cryogenic models are available down to -196℃, featuring extended bonnet to protect packing from extreme cold and prevent stem icing, with cryogenic-certified materials and low-temperature impact verification.

 

Q5: What are installation, maintenance and testing requirements?

A: Weld ends per applicable ANSI standards by qualified welders; support valve near both ends; install with flow direction arrow correctly oriented; protect internals during welding. Bolted bonnet allows in-line seat/disc replacement; packing replaceable online with backseat at full open. Factory tested per API 598 with 1.5× shell and 1.1× seat hydrostatic tests. 18-month warranty from shipment.

 

Hot Tags: Manual Welding Globe Valve | Butt-Weld/Socket-Weld Forged Steel OS&Y Flow Control Valve, China Manual Welding Globe Valve | Butt-Weld/Socket-Weld Forged Steel OS&Y Flow Control Valve manufacturers, suppliers, factory, cage guided globe valve, high quality double non return valve, globe valve pn 16, cheap bronze globe valve, three way globe valve, best one way valve

Item Specification
Product Name Manual Welding Globe Valve
Valve Type Forged steel globe valve; butt-weld/socket-weld ends; bolted bonnet; OS&Y rising stem
Nominal Diameter DN15 – DN600 (1/2" – 24")
Nominal Pressure Class 150 – Class 300 (PN1.6 – PN42 MPa)
Operating Temperature -29℃ ~ 540℃ (standard); -196℃ ~ 120℃ (cryogenic model)
Body Material WCB/A105 Carbon Steel, 304/316/L Stainless Steel, F5/F11/F22 Alloy Steel, LCB/LC1/LC2 Low-temp Steel
Seal Material PTFE, Stainless Steel, Flexible Graphite; backseat for online packing replacement
Drive Mode Manual handwheel; bevel gear optional for large sizes
End Connection Butt Weld (ANSI B16.25, DN≥50); Socket Weld (ANSI B16.11, DN≤40)
Design Standard API 600, ASME B16.34, MSS SP-70, EN 1171, GB/T 12235
Test Standard API 598, EN 12266-1, GB/T 13927
Warranty 18 months from shipment
Send Inquiry