Product Introduction
Our Water Pressure Test Valve is a purpose-built dual-function device mainly installed at boiler superheater outlets, reheater inlets/outlets and key steam pipeline positions. During boiler unit hydrostatic testing, it acts as a pressure isolation barrier to protect steam turbines and core equipment from overpressure test water. After testing, the internal plug plate is replaced with a streamlined guide sleeve to convert the valve into a permanent pipeline component, eliminating the need for disassembly and reinstallation, reducing flow resistance and ensuring long-term stable pipeline operation. It adopts internal pressure self-sealing technology, delivering reliable zero-leakage isolation even at ultra-high test pressures, and is engineered to meet the technical requirements of subcritical, supercritical and ultra-supercritical thermal power units below 1000MW.
Product Features
1.Internal Pressure Self-Sealing Performance: The higher the medium pressure, the tighter the sealing effect. Sealing surfaces are overlaid with stainless steel or hard alloy, paired with O-ring or flexible graphite seal rings, ensuring zero leakage even at ultra-high pressure and guaranteeing accurate test isolation.
2.Dual-Function Interchangeable Design: Plug plate for isolation during testing; guide sleeve for normal pipeline operation after testing. Conversion is done from the top bonnet without cutting the valve body or removing it from the pipeline, saving time and labor costs. The streamlined guide sleeve eliminates eddy currents and thermal expansion impact, reducing flow resistance.
3.High-Strength Durable Materials: Available in carbon steel, forged steel, stainless steel and chromium-molybdenum steel (WCB, WC6, Cr5Mo, F91, ZG20CrMo), with excellent corrosion, high-temperature and pressure resistance. All internal parts are precision forged to reduce casting defects and ensure long service life under harsh HP/HT conditions.
4.Butt Weld Connection & Top-Entry Maintenance: U-shaped groove ends enable direct full-penetration welding to pipelines without intermediate transition sections. All internal parts are accessed from the top, making maintenance and part replacement convenient and quick, minimizing downtime during boiler commissioning and overhaul.
5.Wide HP/HT Operating Range: Rated for PN64–PN630 pressure and -29~610℃ temperature (material-dependent), with size range DN50–DN1000. It adapts to subcritical, supercritical and ultra-supercritical boiler units, with F91 alloy grade supporting operation up to 610℃ for ultra-supercritical steam service.
6.Standard Compliance & Quality Assurance: Manufactured per GB/T 29462-2012, ISO 1167 and ASTM D1598 standards. 100% hydrostatic shell test and self-sealing seat test before delivery, with MTR 3.1 certified materials and 12–24 month warranty.
Working Principle
In test mode: the plug plate is installed inside the valve body to block the flow path. Upstream test pressure acts on the back of the plug plate, pushing it tighter against the seat - sealing force increases proportionally with pressure, achieving zero-leakage isolation to protect downstream turbines and equipment. In service mode: after testing, the top bonnet is removed, and the plug plate is replaced with a streamlined guide sleeve. The valve then becomes a permanent pipeline component with low flow resistance, eliminating eddy currents and thermal expansion impact for stable long-term operation. All conversions are performed from the top without removing the valve from the pipeline.
Application Scenarios
Power Plants: Used for overall hydrostatic test isolation of boiler units, installed at superheater outlets and reheater inlets/outlets. Protects steam turbines and core equipment from overpressure test water; converts to regular pipeline component after commissioning.
Industrial Piping Systems: Applied for pressure testing of steam, water supply and process pipelines to verify pipeline safety and tightness. Dual-function design avoids installing temporary test spools and replacing them afterwards.
Chemical Industry: Suitable for pressure testing of chemical pipelines and equipment, with corrosion-resistant material options. Self-sealing structure ensures reliable isolation during plant hydrostatic commissioning.
Metallurgy & Petroleum: Deployed in metallurgical process pipelines and oil refining hydrostatic testing. Cr-Mo alloy steel and hard-faced seats handle high-temperature/high-pressure steam and oil service.
Boiler Manufacturing & Maintenance: Essential for new boiler commissioning hydrostatic tests and boiler overhaul/retubing pressure tests. Top-entry design enables quick plug-to-guide conversion without valve removal, minimizing outage downtime.
Quality Assurance
Every Water Pressure Test Valve is manufactured and tested in compliance with GB/T 29462-2012, ISO 1167 and relevant boiler pressure vessel codes. All materials come with MTR EN 10204 3.1 certificates. Each valve undergoes 1.5×rated shell hydrostatic test, self-sealing seat verification, functional test and dimensional inspection before shipment. 12–24 month warranty from shipment.
FAQ
Q1: What is a water pressure test valve, and how does the dual-function design work?
A: It is a specialized dual-function isolation device for boiler and pipeline hydrostatic testing. In test mode, a plug plate provides zero-leakage isolation to protect downstream equipment from overpressure test water. After testing, the plug is replaced with a streamlined guide sleeve to convert the valve into a permanent pipeline component, eliminating the need to cut out and replace a temporary test spool, saving significant time and welding costs.
Q2: How does the internal pressure self-sealing structure work, and why is it suitable for ultra-high pressure testing?
A: Test pressure acts on the back of the plug plate, pushing it tighter against the seat - sealing force increases proportionally with pressure. Unlike bolted seals limited by bolt preload, self-sealing delivers tighter sealing at higher pressure, ensuring zero leakage even at PN630 ultra-high pressure hydrostatic tests, with fail-safe performance under unexpected pressure rises.
Q3: What materials are available, and what are the temperature ranges?
A: Body materials include WCB carbon steel (-29~425℃), WC6/ZG20CrMo Cr-Mo steel (-29~550℃), Cr5Mo (-29~600℃) and F91/P91 advanced alloy (-29~610℃). Stainless steel options are available for corrosive service. Select based on boiler steam temperature, pressure and medium properties.
Q4: What are typical installation positions in a boiler system, and why is turbine protection critical?
A: Typically installed at superheater outlets, reheater inlets/outlets and main steam lines. During hydrostatic testing, boilers are tested at 1.25× design pressure, which exceeds turbine pressure ratings. The valve isolates turbines from overpressure test water to prevent blade damage, seal failure and water intrusion, avoiding extremely costly turbine repair and long outages, and meeting boiler code requirements.
Q5: What connections, standards and certifications apply?
A: Butt welding only with U-shaped grooves per ASME B16.25 / GB/T 985 for direct full-penetration pipeline welding. It meets GB/T 29462-2012, ISO 1167, ASTM D1598 design and testing standards, with CE, ISO 9001, MTR 3.1 and optional third-party inspection certifications available.
Hot Tags: Water Pressure Test Valve | Dual-function Hydrostatic Test Plug Valve for Boiler & Pipeline, China Water Pressure Test Valve | Dual-function Hydrostatic Test Plug Valve for Boiler & Pipeline manufacturers, suppliers, factory, 3 4 one way valve, double check valve, swing valve, 3 check valve, one way air valve, 1 1 4 check valve
| Item | Specification |
|---|---|
| Product Name | Water Pressure Test Valve (Hydrostatic Test Plug Valve) |
| Valve Type | Dual-function isolation valve; test plug / service guide sleeve interchangeable |
| Nominal Diameter | DN50 – DN1000 (4" – 48") |
| Nominal Pressure | PN64 – PN630 (Class 300 – Class 3500) |
| Operating Temperature | -29℃ ~ 610℃ (material-dependent) |
| Body Material | WCB, WC6, Cr5Mo, F91/P91 Cr-Mo Steel; Stainless Steel; Forged Steel |
| Seal Type | Hard alloy surfacing; O-ring; reinforced flexible graphite; pressure self-energized |
| End Connection | Butt welding only, U-shaped groove ends |
| Design Standard | GB/T 29462-2012, ISO 1167, ASTM D1598, ASME B16.25 |
| Warranty | 12 – 24 months from shipment |







